From: Claudio Imbrenda <imbrenda@linux.ibm.com>
To: Janosch Frank <frankja@linux.ibm.com>
Cc: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
thuth@redhat.com, david@redhat.com, borntraeger@de.ibm.com,
cohuck@redhat.com, linux-s390@vger.kernel.org, gor@linux.ibm.com,
mihajlov@linux.ibm.com
Subject: Re: [PATCH 1/2] s390: uv: Fix sysfs max number of VCPUs reporting
Date: Tue, 19 Jan 2021 14:11:33 +0100 [thread overview]
Message-ID: <20210119141133.186273c1@ibm-vm> (raw)
In-Reply-To: <20210119100402.84734-2-frankja@linux.ibm.com>
On Tue, 19 Jan 2021 05:04:01 -0500
Janosch Frank <frankja@linux.ibm.com> wrote:
> The number reported by the query is N-1 and I think people reading the
> sysfs file would expect N instead. For users creating VMs there's no
> actual difference because KVM's limit is currently below the UV's
> limit.
>
> The naming of the field is a bit misleading. Number in this context is
> used like ID and starts at 0. The query field denotes the maximum
> number that can be put into the VCPU number field in the "create
> secure CPU" UV call.
once you address Christian's comments:
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
> Fixes: a0f60f8431999 ("s390/protvirt: Add sysfs firmware interface
> for Ultravisor information") Cc: stable@vger.kernel.org
> ---
> arch/s390/boot/uv.c | 2 +-
> arch/s390/include/asm/uv.h | 4 ++--
> arch/s390/kernel/uv.c | 2 +-
> 3 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/s390/boot/uv.c b/arch/s390/boot/uv.c
> index a15c033f53ca..afb721082989 100644
> --- a/arch/s390/boot/uv.c
> +++ b/arch/s390/boot/uv.c
> @@ -35,7 +35,7 @@ void uv_query_info(void)
> uv_info.guest_cpu_stor_len = uvcb.cpu_stor_len;
> uv_info.max_sec_stor_addr =
> ALIGN(uvcb.max_guest_stor_addr, PAGE_SIZE); uv_info.max_num_sec_conf
> = uvcb.max_num_sec_conf;
> - uv_info.max_guest_cpus = uvcb.max_guest_cpus;
> + uv_info.max_guest_cpu_id = uvcb.max_guest_cpu_num;
> }
>
> #ifdef CONFIG_PROTECTED_VIRTUALIZATION_GUEST
> diff --git a/arch/s390/include/asm/uv.h b/arch/s390/include/asm/uv.h
> index 0325fc0469b7..c484c95ea142 100644
> --- a/arch/s390/include/asm/uv.h
> +++ b/arch/s390/include/asm/uv.h
> @@ -96,7 +96,7 @@ struct uv_cb_qui {
> u32 max_num_sec_conf;
> u64 max_guest_stor_addr;
> u8 reserved88[158 - 136];
> - u16 max_guest_cpus;
> + u16 max_guest_cpu_num;
> u8 reserveda0[200 - 160];
> } __packed __aligned(8);
>
> @@ -273,7 +273,7 @@ struct uv_info {
> unsigned long guest_cpu_stor_len;
> unsigned long max_sec_stor_addr;
> unsigned int max_num_sec_conf;
> - unsigned short max_guest_cpus;
> + unsigned short max_guest_cpu_id;
> };
>
> extern struct uv_info uv_info;
> diff --git a/arch/s390/kernel/uv.c b/arch/s390/kernel/uv.c
> index 883bfed9f5c2..b2d2ad153067 100644
> --- a/arch/s390/kernel/uv.c
> +++ b/arch/s390/kernel/uv.c
> @@ -368,7 +368,7 @@ static ssize_t uv_query_max_guest_cpus(struct
> kobject *kobj, struct kobj_attribute *attr, char *page)
> {
> return scnprintf(page, PAGE_SIZE, "%d\n",
> - uv_info.max_guest_cpus);
> + uv_info.max_guest_cpu_id + 1);
> }
>
> static struct kobj_attribute uv_query_max_guest_cpus_attr =
next prev parent reply other threads:[~2021-01-20 0:18 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-19 10:04 [PATCH 0/2] s390: uv: small UV fixes Janosch Frank
2021-01-19 10:04 ` [PATCH 1/2] s390: uv: Fix sysfs max number of VCPUs reporting Janosch Frank
2021-01-19 10:11 ` Christian Borntraeger
2021-01-19 10:15 ` Janosch Frank
2021-01-19 10:19 ` Christian Borntraeger
2021-01-19 13:11 ` Claudio Imbrenda [this message]
2021-01-19 16:19 ` Cornelia Huck
2021-01-19 10:04 ` [PATCH 2/2] s390: mm: Fix secure storage access exception handling Janosch Frank
2021-01-19 10:25 ` Christian Borntraeger
2021-01-19 10:38 ` Janosch Frank
2021-01-19 16:24 ` Cornelia Huck
2021-01-20 13:42 ` Heiko Carstens
2021-01-20 14:39 ` Christian Borntraeger
2021-01-20 15:24 ` Heiko Carstens
2021-01-19 13:09 ` Claudio Imbrenda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210119141133.186273c1@ibm-vm \
--to=imbrenda@linux.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mihajlov@linux.ibm.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox