From: Andre Przywara <andre.przywara@arm.com>
To: Will Deacon <will@kernel.org>,
Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>,
kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
Marc Zyngier <maz@kernel.org>,
Sami Mujawar <sami.mujawar@arm.com>
Subject: [PATCH kvmtool v2 01/22] ioport: Remove ioport__setup_arch()
Date: Thu, 25 Feb 2021 00:58:54 +0000 [thread overview]
Message-ID: <20210225005915.26423-2-andre.przywara@arm.com> (raw)
In-Reply-To: <20210225005915.26423-1-andre.przywara@arm.com>
Since x86 had a special need for registering tons of special I/O ports,
we had an ioport__setup_arch() callback, to allow each architecture
to do the same. As it turns out no one uses it beside x86, so we remove
that unnecessary abstraction.
The generic function was registered via a device_base_init() call, so
we just do the same for the x86 specific function only, and can remove
the unneeded ioport__setup_arch().
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
arm/ioport.c | 5 -----
include/kvm/ioport.h | 1 -
ioport.c | 6 ------
mips/kvm.c | 5 -----
powerpc/ioport.c | 6 ------
x86/ioport.c | 3 ++-
6 files changed, 2 insertions(+), 24 deletions(-)
diff --git a/arm/ioport.c b/arm/ioport.c
index 2f0feb9a..24092c9d 100644
--- a/arm/ioport.c
+++ b/arm/ioport.c
@@ -1,11 +1,6 @@
#include "kvm/ioport.h"
#include "kvm/irq.h"
-int ioport__setup_arch(struct kvm *kvm)
-{
- return 0;
-}
-
void ioport__map_irq(u8 *irq)
{
*irq = irq__alloc_line();
diff --git a/include/kvm/ioport.h b/include/kvm/ioport.h
index 039633f7..d0213541 100644
--- a/include/kvm/ioport.h
+++ b/include/kvm/ioport.h
@@ -35,7 +35,6 @@ struct ioport_operations {
enum irq_type));
};
-int ioport__setup_arch(struct kvm *kvm);
void ioport__map_irq(u8 *irq);
int __must_check ioport__register(struct kvm *kvm, u16 port, struct ioport_operations *ops,
diff --git a/ioport.c b/ioport.c
index 844a832d..a6972179 100644
--- a/ioport.c
+++ b/ioport.c
@@ -221,12 +221,6 @@ out:
return !kvm->cfg.ioport_debug;
}
-int ioport__init(struct kvm *kvm)
-{
- return ioport__setup_arch(kvm);
-}
-dev_base_init(ioport__init);
-
int ioport__exit(struct kvm *kvm)
{
ioport__unregister_all();
diff --git a/mips/kvm.c b/mips/kvm.c
index 26355930..e110e5d5 100644
--- a/mips/kvm.c
+++ b/mips/kvm.c
@@ -100,11 +100,6 @@ void kvm__irq_trigger(struct kvm *kvm, int irq)
die_perror("KVM_IRQ_LINE ioctl");
}
-int ioport__setup_arch(struct kvm *kvm)
-{
- return 0;
-}
-
bool kvm__arch_cpu_supports_vm(void)
{
return true;
diff --git a/powerpc/ioport.c b/powerpc/ioport.c
index 0c188b61..a5cff4ee 100644
--- a/powerpc/ioport.c
+++ b/powerpc/ioport.c
@@ -12,12 +12,6 @@
#include <stdlib.h>
-int ioport__setup_arch(struct kvm *kvm)
-{
- /* PPC has no legacy ioports to set up */
- return 0;
-}
-
void ioport__map_irq(u8 *irq)
{
}
diff --git a/x86/ioport.c b/x86/ioport.c
index 7ad7b8f3..a8d2bb1a 100644
--- a/x86/ioport.c
+++ b/x86/ioport.c
@@ -69,7 +69,7 @@ void ioport__map_irq(u8 *irq)
{
}
-int ioport__setup_arch(struct kvm *kvm)
+static int ioport__setup_arch(struct kvm *kvm)
{
int r;
@@ -150,3 +150,4 @@ int ioport__setup_arch(struct kvm *kvm)
return 0;
}
+dev_base_init(ioport__setup_arch);
--
2.17.5
next prev parent reply other threads:[~2021-02-25 1:01 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-25 0:58 [PATCH kvmtool v2 00/22] Unify I/O port and MMIO trap handling Andre Przywara
2021-02-25 0:58 ` Andre Przywara [this message]
2021-03-02 18:02 ` [PATCH kvmtool v2 01/22] ioport: Remove ioport__setup_arch() Alexandru Elisei
2021-02-25 0:58 ` [PATCH kvmtool v2 02/22] hw/serial: Use device abstraction for FDT generator function Andre Przywara
2021-02-25 0:58 ` [PATCH kvmtool v2 03/22] ioport: Retire .generate_fdt_node functionality Andre Przywara
2021-02-25 0:58 ` [PATCH kvmtool v2 04/22] mmio: Extend handling to include ioport emulation Andre Przywara
2021-03-03 17:58 ` Alexandru Elisei
2021-03-15 12:24 ` Andre Przywara
2021-02-25 0:58 ` [PATCH kvmtool v2 05/22] hw/i8042: Clean up data types Andre Przywara
2021-02-25 0:58 ` [PATCH kvmtool v2 06/22] hw/i8042: Refactor trap handler Andre Przywara
2021-03-08 17:16 ` Alexandru Elisei
2021-02-25 0:59 ` [PATCH kvmtool v2 07/22] hw/i8042: Switch to new trap handlers Andre Przywara
2021-03-08 17:22 ` Alexandru Elisei
2021-02-25 0:59 ` [PATCH kvmtool v2 08/22] x86/ioport: Refactor " Andre Przywara
2021-03-09 11:49 ` Alexandru Elisei
2021-03-15 12:26 ` Andre Przywara
2021-02-25 0:59 ` [PATCH kvmtool v2 09/22] x86/ioport: Switch to new " Andre Przywara
2021-03-09 12:09 ` Alexandru Elisei
2021-03-15 12:26 ` Andre Przywara
2021-02-25 0:59 ` [PATCH kvmtool v2 10/22] hw/rtc: Refactor " Andre Przywara
2021-02-25 0:59 ` [PATCH kvmtool v2 11/22] hw/rtc: Switch to new trap handler Andre Przywara
2021-02-25 0:59 ` [PATCH kvmtool v2 12/22] hw/vesa: Switch trap handling to use MMIO handler Andre Przywara
2021-02-25 0:59 ` [PATCH kvmtool v2 13/22] hw/serial: Refactor trap handler Andre Przywara
2021-03-12 11:29 ` Alexandru Elisei
2021-03-15 12:26 ` Andre Przywara
2021-02-25 0:59 ` [PATCH kvmtool v2 14/22] hw/serial: Switch to new trap handlers Andre Przywara
2021-02-25 0:59 ` [PATCH kvmtool v2 15/22] vfio: Refactor ioport trap handler Andre Przywara
2021-03-09 14:21 ` Alexandru Elisei
2021-02-25 0:59 ` [PATCH kvmtool v2 16/22] vfio: Switch to new ioport trap handlers Andre Przywara
2021-02-25 0:59 ` [PATCH kvmtool v2 17/22] virtio: Switch trap handling to use MMIO handler Andre Przywara
2021-03-09 14:43 ` Alexandru Elisei
2021-02-25 0:59 ` [PATCH kvmtool v2 18/22] pci: " Andre Przywara
2021-02-25 0:59 ` [PATCH kvmtool v2 19/22] Remove ioport specific routines Andre Przywara
2021-03-09 15:13 ` Alexandru Elisei
2021-02-25 0:59 ` [PATCH kvmtool v2 20/22] arm: Reorganise and document memory map Andre Przywara
2021-03-09 15:46 ` Alexandru Elisei
2021-03-15 12:27 ` Andre Przywara
2021-02-25 0:59 ` [PATCH kvmtool v2 21/22] hw/serial: ARM/arm64: Use MMIO at higher addresses Andre Przywara
2021-03-09 16:02 ` Alexandru Elisei
2021-03-15 12:27 ` Andre Przywara
2021-02-25 0:59 ` [PATCH kvmtool v2 22/22] hw/rtc: " Andre Przywara
2021-03-09 16:06 ` Alexandru Elisei
2021-03-02 17:57 ` [PATCH kvmtool v2 00/22] Unify I/O port and MMIO trap handling Alexandru Elisei
2021-03-03 18:41 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210225005915.26423-2-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=alexandru.elisei@arm.com \
--cc=julien.thierry.kdev@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=maz@kernel.org \
--cc=sami.mujawar@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox