From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Ben Gardon <bgardon@google.com>,
Brijesh Singh <brijesh.singh@amd.com>,
Tom Lendacky <thomas.lendacky@amd.com>
Subject: [PATCH v2 05/17] KVM: x86/mmu: Allocate pae_root and lm_root pages in dedicated helper
Date: Thu, 4 Mar 2021 17:10:49 -0800 [thread overview]
Message-ID: <20210305011101.3597423-6-seanjc@google.com> (raw)
In-Reply-To: <20210305011101.3597423-1-seanjc@google.com>
Move the on-demand allocation of the pae_root and lm_root pages, used by
nested NPT for 32-bit L1s, into a separate helper. This will allow a
future patch to hold mmu_lock while allocating the non-special roots so
that make_mmu_pages_available() can be checked once at the start of root
allocation, and thus avoid having to deal with failure in the middle of
root allocation.
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/mmu/mmu.c | 84 +++++++++++++++++++++++++++---------------
1 file changed, 54 insertions(+), 30 deletions(-)
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index 7cb5fb5d2d4d..dd9d5cc13a46 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -3308,38 +3308,10 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
* the shadow page table may be a PAE or a long mode page table.
*/
pm_mask = PT_PRESENT_MASK;
- if (mmu->shadow_root_level == PT64_ROOT_4LEVEL)
+ if (mmu->shadow_root_level == PT64_ROOT_4LEVEL) {
pm_mask |= PT_ACCESSED_MASK | PT_WRITABLE_MASK | PT_USER_MASK;
- /*
- * When shadowing 32-bit or PAE NPT with 64-bit NPT, the PML4 and PDP
- * tables are allocated and initialized at root creation as there is no
- * equivalent level in the guest's NPT to shadow. Allocate the tables
- * on demand, as running a 32-bit L1 VMM is very rare. Unlike 32-bit
- * NPT, the PDP table doesn't need to be in low mem. Preallocate the
- * pages so that the PAE roots aren't leaked on failure.
- */
- if (mmu->shadow_root_level == PT64_ROOT_4LEVEL &&
- (!mmu->pae_root || !mmu->lm_root)) {
- u64 *lm_root, *pae_root;
-
- if (WARN_ON_ONCE(!tdp_enabled || mmu->pae_root || mmu->lm_root))
- return -EIO;
-
- pae_root = (void *)get_zeroed_page(GFP_KERNEL_ACCOUNT);
- if (!pae_root)
- return -ENOMEM;
-
- lm_root = (void *)get_zeroed_page(GFP_KERNEL_ACCOUNT);
- if (!lm_root) {
- free_page((unsigned long)pae_root);
- return -ENOMEM;
- }
-
- mmu->pae_root = pae_root;
- mmu->lm_root = lm_root;
-
- lm_root[0] = __pa(mmu->pae_root) | pm_mask;
+ mmu->lm_root[0] = __pa(mmu->pae_root) | pm_mask;
}
for (i = 0; i < 4; ++i) {
@@ -3373,6 +3345,55 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
return 0;
}
+static int mmu_alloc_special_roots(struct kvm_vcpu *vcpu)
+{
+ struct kvm_mmu *mmu = vcpu->arch.mmu;
+ u64 *lm_root, *pae_root;
+
+ /*
+ * When shadowing 32-bit or PAE NPT with 64-bit NPT, the PML4 and PDP
+ * tables are allocated and initialized at root creation as there is no
+ * equivalent level in the guest's NPT to shadow. Allocate the tables
+ * on demand, as running a 32-bit L1 VMM on 64-bit KVM is very rare.
+ */
+ if (mmu->direct_map || mmu->root_level >= PT64_ROOT_4LEVEL ||
+ mmu->shadow_root_level < PT64_ROOT_4LEVEL)
+ return 0;
+
+ /*
+ * This mess only works with 4-level paging and needs to be updated to
+ * work with 5-level paging.
+ */
+ if (WARN_ON_ONCE(mmu->shadow_root_level != PT64_ROOT_4LEVEL))
+ return -EIO;
+
+ if (mmu->pae_root && mmu->lm_root)
+ return 0;
+
+ /*
+ * The special roots should always be allocated in concert. Yell and
+ * bail if KVM ends up in a state where only one of the roots is valid.
+ */
+ if (WARN_ON_ONCE(!tdp_enabled || mmu->pae_root || mmu->lm_root))
+ return -EIO;
+
+ /* Unlike 32-bit NPT, the PDP table doesn't need to be in low mem. */
+ pae_root = (void *)get_zeroed_page(GFP_KERNEL_ACCOUNT);
+ if (!pae_root)
+ return -ENOMEM;
+
+ lm_root = (void *)get_zeroed_page(GFP_KERNEL_ACCOUNT);
+ if (!lm_root) {
+ free_page((unsigned long)pae_root);
+ return -ENOMEM;
+ }
+
+ mmu->pae_root = pae_root;
+ mmu->lm_root = lm_root;
+
+ return 0;
+}
+
static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
{
if (vcpu->arch.mmu->direct_map)
@@ -4820,6 +4841,9 @@ int kvm_mmu_load(struct kvm_vcpu *vcpu)
int r;
r = mmu_topup_memory_caches(vcpu, !vcpu->arch.mmu->direct_map);
+ if (r)
+ goto out;
+ r = mmu_alloc_special_roots(vcpu);
if (r)
goto out;
r = mmu_alloc_roots(vcpu);
--
2.30.1.766.gb4fecdf3b7-goog
next prev parent reply other threads:[~2021-03-05 1:11 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-05 1:10 [PATCH v2 00/17] KVM: x86/mmu: Lots of bug fixes Sean Christopherson
2021-03-05 1:10 ` [PATCH v2 01/17] KVM: nSVM: Set the shadow root level to the TDP level for nested NPT Sean Christopherson
2021-03-05 1:10 ` [PATCH v2 02/17] KVM: x86/mmu: Alloc page for PDPTEs when shadowing 32-bit NPT with 64-bit Sean Christopherson
2021-03-05 1:10 ` [PATCH v2 03/17] KVM: x86/mmu: Capture 'mmu' in a local variable when allocating roots Sean Christopherson
2021-03-05 1:10 ` [PATCH v2 04/17] KVM: x86/mmu: Allocate the lm_root before allocating PAE roots Sean Christopherson
2021-03-05 1:10 ` Sean Christopherson [this message]
2021-03-05 17:34 ` [PATCH v2 05/17] KVM: x86/mmu: Allocate pae_root and lm_root pages in dedicated helper Paolo Bonzini
2021-03-05 1:10 ` [PATCH v2 06/17] KVM: x86/mmu: Ensure MMU pages are available when allocating roots Sean Christopherson
2021-03-05 1:10 ` [PATCH v2 07/17] KVM: x86/mmu: Check PDPTRs before allocating PAE roots Sean Christopherson
2021-04-08 11:15 ` Wanpeng Li
2021-04-08 12:09 ` Paolo Bonzini
2021-04-08 15:48 ` Sean Christopherson
2021-04-08 15:57 ` Paolo Bonzini
2021-04-08 16:27 ` Sean Christopherson
2021-04-08 16:30 ` Paolo Bonzini
2021-03-05 1:10 ` [PATCH v2 08/17] KVM: x86/mmu: Fix and unconditionally enable WARNs to detect PAE leaks Sean Christopherson
2021-03-05 1:10 ` [PATCH v2 09/17] KVM: x86/mmu: Use '0' as the one and only value for an invalid PAE root Sean Christopherson
2021-03-05 17:52 ` Paolo Bonzini
2021-03-05 18:22 ` Sean Christopherson
2021-03-05 18:23 ` Paolo Bonzini
2021-03-05 1:10 ` [PATCH v2 10/17] KVM: x86/mmu: Set the C-bit in the PDPTRs and LM pseudo-PDPTRs Sean Christopherson
2021-03-05 1:10 ` [PATCH v2 11/17] KVM: x86/mmu: Mark the PAE roots as decrypted for shadow paging Sean Christopherson
2021-03-05 17:44 ` Paolo Bonzini
2021-03-05 18:02 ` Sean Christopherson
2021-03-05 1:10 ` [PATCH v2 12/17] KVM: SVM: Don't strip the C-bit from CR2 on #PF interception Sean Christopherson
2021-03-05 1:10 ` [PATCH v2 13/17] KVM: nVMX: Defer the MMU reload to the normal path on an EPTP switch Sean Christopherson
2021-03-05 1:10 ` [PATCH v2 14/17] KVM: x86: Defer the MMU unload to the normal path on an global INVPCID Sean Christopherson
2021-03-05 1:10 ` [PATCH v2 15/17] KVM: x86/mmu: Unexport MMU load/unload functions Sean Christopherson
2021-03-05 1:11 ` [PATCH v2 16/17] KVM: x86/mmu: Sync roots after MMU load iff load as successful Sean Christopherson
2021-03-05 1:11 ` [PATCH v2 17/17] KVM: x86/mmu: WARN on NULL pae_root or lm_root, or bad shadow root level Sean Christopherson
2021-03-05 17:53 ` [PATCH v2 00/17] KVM: x86/mmu: Lots of bug fixes Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210305011101.3597423-6-seanjc@google.com \
--to=seanjc@google.com \
--cc=bgardon@google.com \
--cc=brijesh.singh@amd.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=thomas.lendacky@amd.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox