Re: [kvm-unit-tests PATCH v3] configure: arm: Replace --vmm with --target

[Andrew Jones <drjones@redhat.com>]

On Thu, Apr 29, 2021 at 03:12:04PM +0100, Alexandru Elisei wrote:
> The --vmm configure option was added to distinguish between the two virtual
> machine managers that kvm-unit-tests supports for the arm and arm64
> architectures, qemu or kvmtool. There are plans to make kvm-unit-tests work
> as an EFI app, which will require changes to the way tests are compiled.
> Instead of adding a new configure option specifically for EFI and have it
> coexist with --vmm, or overloading the semantics of the existing --vmm
> option, let's replace --vmm with the more generic name --target.
> 
> Since --target is only valid for arm and arm64, reject the option when it's
> specified for another architecture, which is how --vmm should have behaved
> from the start.
> 
> Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
> ---
> Changes in v3:
> 
> * Using --target for any architecture other than arm and arm64 generates an
>   error.
> * Don't generate the TARGET variable in config.mak for other architectures.
> * Cosmetic changes to the commit message.
> 
> Changes in v2:
> 
> * Removed the RFC tag and cover letter.
> * Removed --vmm entirely.
> 
>  configure | 32 +++++++++++++++++++++++---------
>  1 file changed, 23 insertions(+), 9 deletions(-)
> 
> diff --git a/configure b/configure
> index 01a0b262a9f2..d5d223fe3a90 100755
> --- a/configure
> +++ b/configure
> @@ -21,7 +21,7 @@ pretty_print_stacks=yes
>  environ_default=yes
>  u32_long=
>  wa_divide=
> -vmm="qemu"
> +target=
>  errata_force=0
>  erratatxt="$srcdir/errata.txt"
>  host_key_document=
> @@ -35,8 +35,8 @@ usage() {
>  	Options include:
>  	    --arch=ARCH            architecture to compile for ($arch)
>  	    --processor=PROCESSOR  processor to compile for ($arch)
> -	    --vmm=VMM              virtual machine monitor to compile for (qemu
> -	                           or kvmtool, default is qemu) (arm/arm64 only)
> +	    --target=TARGET        target platform that the tests will be running on (qemu or
> +	                           kvmtool, default is qemu) (arm/arm64 only)
>  	    --cross-prefix=PREFIX  cross compiler prefix
>  	    --cc=CC		   c compiler to use ($cc)
>  	    --ld=LD		   ld linker to use ($ld)
> @@ -58,7 +58,7 @@ usage() {
>  	    --earlycon=EARLYCON
>  	                           Specify the UART name, type and address (optional, arm and
>  	                           arm64 only). The specified address will overwrite the UART
> -	                           address set by the --vmm option. EARLYCON can be one of
> +	                           address set by the --target option. EARLYCON can be one of
>  	                           (case sensitive):
>  	               uart[8250],mmio,ADDR
>  	                           Specify an 8250 compatible UART at address ADDR. Supported
> @@ -88,8 +88,8 @@ while [[ "$1" = -* ]]; do
>          --processor)
>  	    processor="$arg"
>  	    ;;
> -	--vmm)
> -	    vmm="$arg"
> +	--target)
> +	    target="$arg"
>  	    ;;
>  	--cross-prefix)
>  	    cross_prefix="$arg"
> @@ -146,6 +146,15 @@ arch_name=$arch
>  [ "$arch" = "aarch64" ] && arch="arm64"
>  [ "$arch_name" = "arm64" ] && arch_name="aarch64"
>  
> +if [ -z "$target" ]; then
> +    target="qemu"
> +else
> +    if [ "$arch" != "arm64" ] && [ "$arch" != "arm" ]; then
> +        echo "--target is not supported for $arch"
> +        usage
> +    fi
> +fi
> +
>  if [ -z "$page_size" ]; then
>      [ "$arch" = "arm64" ] && page_size="65536"
>      [ "$arch" = "arm" ] && page_size="4096"
> @@ -177,13 +186,13 @@ if [ "$arch" = "i386" ] || [ "$arch" = "x86_64" ]; then
>      testdir=x86
>  elif [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
>      testdir=arm
> -    if [ "$vmm" = "qemu" ]; then
> +    if [ "$target" = "qemu" ]; then
>          arm_uart_early_addr=0x09000000
> -    elif [ "$vmm" = "kvmtool" ]; then
> +    elif [ "$target" = "kvmtool" ]; then
>          arm_uart_early_addr=0x3f8
>          errata_force=1
>      else
> -        echo '--vmm must be one of "qemu" or "kvmtool"!'
> +        echo '--target must be one of "qemu" or "kvmtool"!'

I switched the quotes from " to ', e.g. 'qemu'.

>          usage
>      fi
>  
> @@ -318,6 +327,11 @@ WA_DIVIDE=$wa_divide
>  GENPROTIMG=${GENPROTIMG-genprotimg}
>  HOST_KEY_DOCUMENT=$host_key_document
>  EOF
> +if [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
> +cat <<EOF >> config.mak
> +TARGET=$target
> +EOF

I changed this to

    echo "TARGET=$target" >> config.mak

> +fi
>  
>  cat <<EOF > lib/config.h
>  #ifndef CONFIG_H
> -- 
> 2.31.1
> 

Applied to arm/queue

https://gitlab.com/rhdrjones/kvm-unit-tests/-/commits/arm/queue

Thanks,
drew