From: Ben Gardon <bgardon@google.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>, Peter Xu <peterx@redhat.com>,
Sean Christopherson <seanjc@google.com>,
Peter Shier <pshier@google.com>,
David Matlack <dmatlack@google.com>,
Mingwei Zhang <mizhang@google.com>,
Yulei Zhang <yulei.kernel@gmail.com>,
Wanpeng Li <kernellwp@gmail.com>,
Xiao Guangrong <xiaoguangrong.eric@gmail.com>,
Kai Huang <kai.huang@intel.com>,
Keqian Zhu <zhukeqian1@huawei.com>,
David Hildenbrand <david@redhat.com>,
Ben Gardon <bgardon@google.com>
Subject: [PATCH 13/15] KVM: x86/mmu: Add try_get_mt_mask to x86_ops
Date: Mon, 15 Nov 2021 15:46:01 -0800 [thread overview]
Message-ID: <20211115234603.2908381-14-bgardon@google.com> (raw)
In-Reply-To: <20211115234603.2908381-1-bgardon@google.com>
Add another function for getting the memory type mask to x86_ops.
This version of the function can fail, but it does not require a vCPU
pointer. It will be used in a subsequent commit for in-place large page
promotion when disabling dirty logging.
No functional change intended.
Signed-off-by: Ben Gardon <bgardon@google.com>
---
arch/x86/include/asm/kvm-x86-ops.h | 1 +
arch/x86/include/asm/kvm_host.h | 2 ++
arch/x86/kvm/svm/svm.c | 8 ++++++++
arch/x86/kvm/vmx/vmx.c | 1 +
4 files changed, 12 insertions(+)
diff --git a/arch/x86/include/asm/kvm-x86-ops.h b/arch/x86/include/asm/kvm-x86-ops.h
index cefe1d81e2e8..c86e9629ff1a 100644
--- a/arch/x86/include/asm/kvm-x86-ops.h
+++ b/arch/x86/include/asm/kvm-x86-ops.h
@@ -84,6 +84,7 @@ KVM_X86_OP_NULL(sync_pir_to_irr)
KVM_X86_OP(set_tss_addr)
KVM_X86_OP(set_identity_map_addr)
KVM_X86_OP(get_mt_mask)
+KVM_X86_OP(try_get_mt_mask)
KVM_X86_OP(load_mmu_pgd)
KVM_X86_OP_NULL(has_wbinvd_exit)
KVM_X86_OP(get_l2_tsc_offset)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 88fce6ab4bbd..ae13075f4d4c 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1400,6 +1400,8 @@ struct kvm_x86_ops {
int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
int (*set_identity_map_addr)(struct kvm *kvm, u64 ident_addr);
u64 (*get_mt_mask)(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio);
+ bool (*try_get_mt_mask)(struct kvm *kvm, gfn_t gfn,
+ bool is_mmio, u64 *mask);
void (*load_mmu_pgd)(struct kvm_vcpu *vcpu, hpa_t root_hpa,
int root_level);
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 21bb81710e0f..d073cc3985e6 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4067,6 +4067,13 @@ static bool svm_has_emulated_msr(struct kvm *kvm, u32 index)
return true;
}
+static bool svm_try_get_mt_mask(struct kvm *kvm, gfn_t gfn,
+ bool is_mmio, u64 *mask)
+{
+ *mask = 0;
+ return true;
+}
+
static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
{
return 0;
@@ -4660,6 +4667,7 @@ static struct kvm_x86_ops svm_x86_ops __initdata = {
.set_tss_addr = svm_set_tss_addr,
.set_identity_map_addr = svm_set_identity_map_addr,
.get_mt_mask = svm_get_mt_mask,
+ .try_get_mt_mask = svm_try_get_mt_mask,
.get_exit_info = svm_get_exit_info,
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 4129614262e8..8cd6c1f50d3e 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -7658,6 +7658,7 @@ static struct kvm_x86_ops vmx_x86_ops __initdata = {
.set_tss_addr = vmx_set_tss_addr,
.set_identity_map_addr = vmx_set_identity_map_addr,
.get_mt_mask = vmx_get_mt_mask,
+ .try_get_mt_mask = vmx_try_get_mt_mask,
.get_exit_info = vmx_get_exit_info,
--
2.34.0.rc1.387.gb447b232ab-goog
next prev parent reply other threads:[~2021-11-16 3:17 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-15 23:45 [PATCH 00/15] Currently disabling dirty logging with the TDP MMU is extremely slow. On a 96 vCPU / 96G VM it takes ~45 seconds to disable dirty logging with the TDP MMU, as opposed to ~3.5 seconds with the legacy MMU. This series optimizes TLB flushes and introduces in-place large page promotion, to bring the disable dirty log time down to ~2 seconds Ben Gardon
2021-11-15 23:45 ` [PATCH 01/15] KVM: x86/mmu: Remove redundant flushes when disabling dirty logging Ben Gardon
2021-11-18 8:26 ` Paolo Bonzini
2021-11-15 23:45 ` [PATCH 02/15] KVM: x86/mmu: Introduce vcpu_make_spte Ben Gardon
2021-11-15 23:45 ` [PATCH 03/15] KVM: x86/mmu: Factor wrprot for nested PML out of make_spte Ben Gardon
2021-11-15 23:45 ` [PATCH 04/15] KVM: x86/mmu: Factor mt_mask " Ben Gardon
2021-11-15 23:45 ` [PATCH 05/15] KVM: x86/mmu: Remove need for a vcpu from kvm_slot_page_track_is_active Ben Gardon
2021-11-18 8:25 ` Paolo Bonzini
2021-11-15 23:45 ` [PATCH 06/15] KVM: x86/mmu: Remove need for a vcpu from mmu_try_to_unsync_pages Ben Gardon
2021-11-18 8:25 ` Paolo Bonzini
2021-11-15 23:45 ` [PATCH 07/15] KVM: x86/mmu: Factor shadow_zero_check out of make_spte Ben Gardon
2021-11-15 23:45 ` [PATCH 08/15] KVM: x86/mmu: Replace vcpu argument with kvm pointer in make_spte Ben Gardon
2021-11-15 23:45 ` [PATCH 09/15] KVM: x86/mmu: Factor out the meat of reset_tdp_shadow_zero_bits_mask Ben Gardon
2021-11-15 23:45 ` [PATCH 10/15] KVM: x86/mmu: Propagate memslot const qualifier Ben Gardon
2021-11-18 8:27 ` Paolo Bonzini
2021-11-15 23:45 ` [PATCH 11/15] KVM: x86/MMU: Refactor vmx_get_mt_mask Ben Gardon
2021-11-18 8:30 ` Paolo Bonzini
2021-11-18 15:30 ` Sean Christopherson
2021-11-19 9:02 ` Paolo Bonzini
2021-11-22 18:11 ` Ben Gardon
2021-11-22 18:46 ` Sean Christopherson
2021-11-15 23:46 ` [PATCH 12/15] KVM: x86/mmu: Factor out part of vmx_get_mt_mask which does not depend on vcpu Ben Gardon
2021-11-15 23:46 ` Ben Gardon [this message]
2021-11-15 23:46 ` [PATCH 14/15] KVM: x86/mmu: Make kvm_is_mmio_pfn usable outside of spte.c Ben Gardon
2021-11-15 23:46 ` [PATCH 15/15] KVM: x86/mmu: Promote pages in-place when disabling dirty logging Ben Gardon
2021-11-25 4:18 ` Peter Xu
2021-11-29 18:31 ` Ben Gardon
2021-11-30 0:13 ` Sean Christopherson
2021-11-30 7:28 ` Peter Xu
2021-11-30 16:01 ` Sean Christopherson
2021-12-01 1:59 ` Peter Xu
2021-11-15 23:58 ` [PATCH 00/15] Currently disabling dirty logging with the TDP MMU is extremely slow. On a 96 vCPU / 96G VM it takes ~45 seconds to disable dirty logging with the TDP MMU, as opposed to ~3.5 seconds with the legacy MMU. This series optimizes TLB flushes and introduces in-place large page promotion, to bring the disable dirty log time down to ~2 seconds Ben Gardon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211115234603.2908381-14-bgardon@google.com \
--to=bgardon@google.com \
--cc=david@redhat.com \
--cc=dmatlack@google.com \
--cc=kai.huang@intel.com \
--cc=kernellwp@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mizhang@google.com \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=pshier@google.com \
--cc=seanjc@google.com \
--cc=xiaoguangrong.eric@gmail.com \
--cc=yulei.kernel@gmail.com \
--cc=zhukeqian1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox