public inbox for kvm@vger.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>, Joerg Roedel <joro@8bytes.org>
Cc: Sean Christopherson <seanjc@google.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
	kvm@vger.kernel.org, iommu@lists.linux-foundation.org,
	linux-kernel@vger.kernel.org,
	Maxim Levitsky <mlevitsk@redhat.com>
Subject: [PATCH v3 14/26] KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
Date: Wed,  8 Dec 2021 01:52:24 +0000	[thread overview]
Message-ID: <20211208015236.1616697-15-seanjc@google.com> (raw)
In-Reply-To: <20211208015236.1616697-1-seanjc@google.com>

Don't bother updating the Physical APIC table or IRTE when loading a vCPU
that is blocking, i.e. won't be marked IsRun{ning}=1, as the pCPU is
queried if and only if IsRunning is '1'.  If the vCPU was migrated, the
new pCPU will be picked up when avic_vcpu_load() is called by
svm_vcpu_unblocking().

Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/kvm/svm/avic.c | 33 +++++++++++++++++++--------------
 1 file changed, 19 insertions(+), 14 deletions(-)

diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index dc0cbe500106..0c6dfd85b3bb 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -974,7 +974,6 @@ void avic_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 	u64 entry;
 	/* ID = 0xff (broadcast), ID > 0xff (reserved) */
-	bool is_blocking = kvm_vcpu_is_blocking(vcpu);
 	int h_physical_id = kvm_cpu_get_apicid(cpu);
 	struct vcpu_svm *svm = to_svm(vcpu);
 
@@ -985,24 +984,25 @@ void avic_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	if (WARN_ON(h_physical_id > AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK))
 		return;
 
+	/*
+	 * No need to update anything if the vCPU is blocking, i.e. if the vCPU
+	 * is being scheduled in after being preempted.  The CPU entries in the
+	 * Physical APIC table and IRTE are consumed iff IsRun{ning} is '1'.
+	 * If the vCPU was migrated, its new CPU value will be stuffed when the
+	 * vCPU unblocks.
+	 */
+	if (kvm_vcpu_is_blocking(vcpu))
+		return;
+
 	entry = READ_ONCE(*(svm->avic_physical_id_cache));
 	WARN_ON(entry & AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK);
 
 	entry &= ~AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK;
 	entry |= (h_physical_id & AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK);
-
-	entry &= ~AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK;
-
-	/*
-	 * Don't mark the vCPU as running if its blocking, i.e. if the vCPU is
-	 * preempted after svm_vcpu_blocking() but before KVM voluntarily
-	 * schedules out the vCPU.
-	 */
-	if (!is_blocking)
-		entry |= AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK;
+	entry |= AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK;
 
 	WRITE_ONCE(*(svm->avic_physical_id_cache), entry);
-	avic_update_iommu_vcpu_affinity(vcpu, h_physical_id, !is_blocking);
+	avic_update_iommu_vcpu_affinity(vcpu, h_physical_id, true);
 }
 
 void avic_vcpu_put(struct kvm_vcpu *vcpu)
@@ -1011,8 +1011,12 @@ void avic_vcpu_put(struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	entry = READ_ONCE(*(svm->avic_physical_id_cache));
-	if (entry & AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK)
-		avic_update_iommu_vcpu_affinity(vcpu, -1, 0);
+
+	/* Nothing to do if IsRunning == '0' due to vCPU blocking. */
+	if (!(entry & AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK))
+		return;
+
+	avic_update_iommu_vcpu_affinity(vcpu, -1, 0);
 
 	entry &= ~AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK;
 	WRITE_ONCE(*(svm->avic_physical_id_cache), entry);
@@ -1043,5 +1047,6 @@ void svm_vcpu_blocking(struct kvm_vcpu *vcpu)
 
 void svm_vcpu_unblocking(struct kvm_vcpu *vcpu)
 {
+
 	avic_set_running(vcpu, true);
 }
-- 
2.34.1.400.ga245620fadb-goog


  parent reply	other threads:[~2021-12-08  1:55 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-08  1:52 [PATCH v3 00/26] KVM: x86: Halt and APICv overhaul Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 01/26] KVM: fix avic_set_running for preemptable kernels Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 02/26] KVM: nVMX: Ensure vCPU honors event request if posting nested IRQ fails Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 03/26] KVM: VMX: Clean up PI pre/post-block WARNs Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 04/26] KVM: VMX: Handle PI wakeup shenanigans during vcpu_put/load Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 05/26] KVM: Drop unused kvm_vcpu.pre_pcpu field Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 06/26] KVM: Move x86 VMX's posted interrupt list_head to vcpu_vmx Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 07/26] KVM: VMX: Move preemption timer <=> hrtimer dance to common x86 Sean Christopherson
2023-03-29 12:34   ` Tudor Ambarus
2023-03-29 13:47     ` Paolo Bonzini
2023-03-29 15:22       ` Tudor Ambarus
2023-03-30  7:12         ` Tudor Ambarus
2021-12-08  1:52 ` [PATCH v3 08/26] KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 09/26] KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 10/26] KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 11/26] KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 12/26] KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 13/26] KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption Sean Christopherson
2021-12-08  1:52 ` Sean Christopherson [this message]
2021-12-08  1:52 ` [PATCH v3 15/26] iommu/amd: KVM: SVM: Use pCPU to infer IsRun state for IRTE Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 16/26] KVM: VMX: Don't do full kick when triggering posted interrupt "fails" Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 17/26] KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 18/26] KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 19/26] KVM: VMX: Fold fallback path into triggering posted IRQ helper Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 20/26] KVM: VMX: Don't do full kick when handling posted interrupt wakeup Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 21/26] KVM: SVM: Drop AVIC's intermediate avic_set_running() helper Sean Christopherson
2021-12-08 14:43   ` Paolo Bonzini
2021-12-08 15:03     ` Maxim Levitsky
2021-12-08 15:43     ` Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 22/26] KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 23/26] KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 24/26] KVM: x86: Skip APICv update if APICv is disable at the module level Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 25/26] KVM: x86: Drop NULL check on kvm_x86_ops.check_apicv_inhibit_reasons Sean Christopherson
2021-12-08  1:52 ` [PATCH v3 26/26] KVM: x86: Unexport __kvm_request_apicv_update() Sean Christopherson
2021-12-08  9:04 ` [PATCH v3 00/26] KVM: x86: Halt and APICv overhaul Paolo Bonzini
2021-12-08 14:51 ` Paolo Bonzini
2021-12-08 23:00 ` Maxim Levitsky
2021-12-08 23:16   ` Maxim Levitsky
2021-12-08 23:34     ` Maxim Levitsky
2021-12-09  0:04       ` Sean Christopherson
2021-12-09  6:36         ` Maxim Levitsky
2021-12-09  0:02     ` Sean Christopherson
2021-12-09 14:29       ` Paolo Bonzini
2021-12-09 14:48         ` Maxim Levitsky
2021-12-09 15:45           ` Sean Christopherson
2021-12-09 16:03             ` Maxim Levitsky
2021-12-09  1:37     ` Sean Christopherson
2021-12-09  6:31       ` Maxim Levitsky
2021-12-08 23:43   ` Sean Christopherson
2021-12-09  6:34     ` Maxim Levitsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211208015236.1616697-15-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jmattson@google.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=suravee.suthikulpanit@amd.com \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox