From: Lai Jiangshan <jiangshanlai@gmail.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>
Cc: Lai Jiangshan <laijs@linux.alibaba.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>
Subject: [PATCH V2 1/3] KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()
Date: Thu, 16 Dec 2021 10:19:36 +0800 [thread overview]
Message-ID: <20211216021938.11752-2-jiangshanlai@gmail.com> (raw)
In-Reply-To: <20211216021938.11752-1-jiangshanlai@gmail.com>
From: Lai Jiangshan <laijs@linux.alibaba.com>
The host CR3 in the vcpu thread can only be changed when scheduling.
So HOST_CR3 can be saved only in vmx_prepare_switch_to_guest() and be
synced in vmx_sync_vmcs_host_state() when switching VMCS.
vmx_set_host_fs_gs() is called in both places, so it is renamed to
vmx_set_vmcs_host_state() and it also updates the HOST_CR3.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
---
arch/x86/kvm/vmx/nested.c | 11 +++--------
arch/x86/kvm/vmx/vmx.c | 21 +++++++++++----------
arch/x86/kvm/vmx/vmx.h | 5 +++--
3 files changed, 17 insertions(+), 20 deletions(-)
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 26b236187850..d07a7fa75783 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -245,7 +245,8 @@ static void vmx_sync_vmcs_host_state(struct vcpu_vmx *vmx,
src = &prev->host_state;
dest = &vmx->loaded_vmcs->host_state;
- vmx_set_host_fs_gs(dest, src->fs_sel, src->gs_sel, src->fs_base, src->gs_base);
+ vmx_set_vmcs_host_state(dest, src->cr3, src->fs_sel, src->gs_sel,
+ src->fs_base, src->gs_base);
dest->ldt_sel = src->ldt_sel;
#ifdef CONFIG_X86_64
dest->ds_sel = src->ds_sel;
@@ -3054,7 +3055,7 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,
static int nested_vmx_check_vmentry_hw(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
- unsigned long cr3, cr4;
+ unsigned long cr4;
bool vm_fail;
if (!nested_early_check)
@@ -3077,12 +3078,6 @@ static int nested_vmx_check_vmentry_hw(struct kvm_vcpu *vcpu)
*/
vmcs_writel(GUEST_RFLAGS, 0);
- cr3 = __get_current_cr3_fast();
- if (unlikely(cr3 != vmx->loaded_vmcs->host_state.cr3)) {
- vmcs_writel(HOST_CR3, cr3);
- vmx->loaded_vmcs->host_state.cr3 = cr3;
- }
-
cr4 = cr4_read_shadow();
if (unlikely(cr4 != vmx->loaded_vmcs->host_state.cr4)) {
vmcs_writel(HOST_CR4, cr4);
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 7826556b2a47..5f281f5ee961 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -1069,9 +1069,14 @@ static void pt_guest_exit(struct vcpu_vmx *vmx)
wrmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl);
}
-void vmx_set_host_fs_gs(struct vmcs_host_state *host, u16 fs_sel, u16 gs_sel,
- unsigned long fs_base, unsigned long gs_base)
+void vmx_set_vmcs_host_state(struct vmcs_host_state *host, unsigned long cr3,
+ u16 fs_sel, u16 gs_sel,
+ unsigned long fs_base, unsigned long gs_base)
{
+ if (unlikely(cr3 != host->cr3)) {
+ vmcs_writel(HOST_CR3, cr3);
+ host->cr3 = cr3;
+ }
if (unlikely(fs_sel != host->fs_sel)) {
if (!(fs_sel & 7))
vmcs_write16(HOST_FS_SELECTOR, fs_sel);
@@ -1166,7 +1171,9 @@ void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu)
gs_base = segment_base(gs_sel);
#endif
- vmx_set_host_fs_gs(host_state, fs_sel, gs_sel, fs_base, gs_base);
+ vmx_set_vmcs_host_state(host_state, __get_current_cr3_fast(),
+ fs_sel, gs_sel, fs_base, gs_base);
+
vmx->guest_state_loaded = true;
}
@@ -6629,7 +6636,7 @@ static noinstr void vmx_vcpu_enter_exit(struct kvm_vcpu *vcpu,
static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
- unsigned long cr3, cr4;
+ unsigned long cr4;
/* Record the guest's net vcpu time for enforced NMI injections. */
if (unlikely(!enable_vnmi &&
@@ -6674,12 +6681,6 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu)
vmcs_writel(GUEST_RIP, vcpu->arch.regs[VCPU_REGS_RIP]);
vcpu->arch.regs_dirty = 0;
- cr3 = __get_current_cr3_fast();
- if (unlikely(cr3 != vmx->loaded_vmcs->host_state.cr3)) {
- vmcs_writel(HOST_CR3, cr3);
- vmx->loaded_vmcs->host_state.cr3 = cr3;
- }
-
cr4 = cr4_read_shadow();
if (unlikely(cr4 != vmx->loaded_vmcs->host_state.cr4)) {
vmcs_writel(HOST_CR4, cr4);
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index 99588aa8474b..acb874db02da 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -374,8 +374,9 @@ int allocate_vpid(void);
void free_vpid(int vpid);
void vmx_set_constant_host_state(struct vcpu_vmx *vmx);
void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu);
-void vmx_set_host_fs_gs(struct vmcs_host_state *host, u16 fs_sel, u16 gs_sel,
- unsigned long fs_base, unsigned long gs_base);
+void vmx_set_vmcs_host_state(struct vmcs_host_state *host, unsigned long cr3,
+ u16 fs_sel, u16 gs_sel,
+ unsigned long fs_base, unsigned long gs_base);
int vmx_get_cpl(struct kvm_vcpu *vcpu);
bool vmx_emulation_required(struct kvm_vcpu *vcpu);
unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu);
--
2.19.1.6.gb485710b
next prev parent reply other threads:[~2021-12-16 2:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-16 2:19 [PATCH 0/3] KVM: x86: Fixes for kvm/queue Lai Jiangshan
2021-12-16 2:19 ` Lai Jiangshan [this message]
2021-12-16 2:19 ` [PATCH V2 2/3] KVM: x86/mmu: Ensure pae_root to be reconstructed for shadow paging if the guest PDPTEs is changed Lai Jiangshan
2021-12-16 2:19 ` [PATCH 3/3] KVM: VMX: Mark VCPU_EXREG_CR3 dirty when !CR0_PG -> CR0_PG if EPT + !URG Lai Jiangshan
2021-12-20 16:49 ` [PATCH 0/3] KVM: x86: Fixes for kvm/queue Paolo Bonzini
2022-02-11 5:32 ` Wanpeng Li
2022-02-11 16:31 ` Sean Christopherson
2022-02-11 17:04 ` Paolo Bonzini
2022-02-24 17:50 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211216021938.11752-2-jiangshanlai@gmail.com \
--to=jiangshanlai@gmail.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=laijs@linux.alibaba.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=tglx@linutronix.de \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox