From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
Vineeth Pillai <viremana@linux.microsoft.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/4] KVM: nSVM: Split off common definitions for Hyper-V on KVM and KVM on Hyper-V
Date: Wed, 2 Feb 2022 10:50:59 +0100 [thread overview]
Message-ID: <20220202095100.129834-4-vkuznets@redhat.com> (raw)
In-Reply-To: <20220202095100.129834-1-vkuznets@redhat.com>
In preparation to implementing Enlightened MSR-Bitmap feature for Hyper-V
on KVM, split off the required definitions into common 'svm/hyperv.h'
header.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
arch/x86/kvm/svm/hyperv.h | 35 +++++++++++++++++++++++++++++++++
arch/x86/kvm/svm/svm_onhyperv.h | 25 +----------------------
2 files changed, 36 insertions(+), 24 deletions(-)
create mode 100644 arch/x86/kvm/svm/hyperv.h
diff --git a/arch/x86/kvm/svm/hyperv.h b/arch/x86/kvm/svm/hyperv.h
new file mode 100644
index 000000000000..7d6d97968fb9
--- /dev/null
+++ b/arch/x86/kvm/svm/hyperv.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Common Hyper-V on KVM and KVM on Hyper-V definitions (SVM).
+ */
+
+#ifndef __ARCH_X86_KVM_SVM_HYPERV_H__
+#define __ARCH_X86_KVM_SVM_HYPERV_H__
+
+#include <asm/mshyperv.h>
+
+#include "../hyperv.h"
+
+/*
+ * Hyper-V uses the software reserved 32 bytes in VMCB
+ * control area to expose SVM enlightenments to guests.
+ */
+struct hv_enlightenments {
+ struct __packed hv_enlightenments_control {
+ u32 nested_flush_hypercall:1;
+ u32 msr_bitmap:1;
+ u32 enlightened_npt_tlb: 1;
+ u32 reserved:29;
+ } __packed hv_enlightenments_control;
+ u32 hv_vp_id;
+ u64 hv_vm_id;
+ u64 partition_assist_page;
+ u64 reserved;
+} __packed;
+
+/*
+ * Hyper-V uses the software reserved clean bit in VMCB
+ */
+#define VMCB_HV_NESTED_ENLIGHTENMENTS VMCB_SW
+
+#endif /* __ARCH_X86_KVM_SVM_HYPERV_H__ */
diff --git a/arch/x86/kvm/svm/svm_onhyperv.h b/arch/x86/kvm/svm/svm_onhyperv.h
index c53b8bf8d013..c787c032f68d 100644
--- a/arch/x86/kvm/svm/svm_onhyperv.h
+++ b/arch/x86/kvm/svm/svm_onhyperv.h
@@ -7,35 +7,12 @@
#define __ARCH_X86_KVM_SVM_ONHYPERV_H__
#if IS_ENABLED(CONFIG_HYPERV)
-#include <asm/mshyperv.h>
-#include "hyperv.h"
#include "kvm_onhyperv.h"
+#include "svm/hyperv.h"
static struct kvm_x86_ops svm_x86_ops;
-/*
- * Hyper-V uses the software reserved 32 bytes in VMCB
- * control area to expose SVM enlightenments to guests.
- */
-struct hv_enlightenments {
- struct __packed hv_enlightenments_control {
- u32 nested_flush_hypercall:1;
- u32 msr_bitmap:1;
- u32 enlightened_npt_tlb: 1;
- u32 reserved:29;
- } __packed hv_enlightenments_control;
- u32 hv_vp_id;
- u64 hv_vm_id;
- u64 partition_assist_page;
- u64 reserved;
-} __packed;
-
-/*
- * Hyper-V uses the software reserved clean bit in VMCB
- */
-#define VMCB_HV_NESTED_ENLIGHTENMENTS VMCB_SW
-
int svm_hv_enable_direct_tlbflush(struct kvm_vcpu *vcpu);
static inline void svm_hv_init_vmcb(struct vmcb *vmcb)
--
2.34.1
next prev parent reply other threads:[~2022-02-02 9:52 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-02 9:50 [PATCH v2 0/4] KVM: SVM: nSVM: Implement Enlightened MSR-Bitmap for Hyper-V-on-KVM Vitaly Kuznetsov
2022-02-02 9:50 ` [PATCH v2 1/4] KVM: nSVM: Track whether changes in L0 require MSR bitmap for L2 to be rebuilt Vitaly Kuznetsov
2022-02-02 9:50 ` [PATCH v2 2/4] KVM: x86: Make kvm_hv_hypercall_enabled() static inline Vitaly Kuznetsov
2022-02-02 9:50 ` Vitaly Kuznetsov [this message]
2022-02-02 9:51 ` [PATCH v2 4/4] KVM: nSVM: Implement Enlightened MSR-Bitmap feature Vitaly Kuznetsov
2022-02-02 17:14 ` [PATCH v2 0/4] KVM: SVM: nSVM: Implement Enlightened MSR-Bitmap for Hyper-V-on-KVM Paolo Bonzini
2022-02-03 9:51 ` Vitaly Kuznetsov
2022-02-03 10:39 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220202095100.129834-4-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=viremana@linux.microsoft.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox