From: Maxim Levitsky <mlevitsk@redhat.com>
To: kvm@vger.kernel.org
Cc: Wanpeng Li <wanpengli@tencent.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Sean Christopherson <seanjc@google.com>,
Jim Mattson <jmattson@google.com>,
"H. Peter Anvin" <hpa@zytor.com>, Joerg Roedel <joro@8bytes.org>,
Dave Hansen <dave.hansen@linux.intel.com>,
Ingo Molnar <mingo@redhat.com>,
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
linux-kernel@vger.kernel.org,
Maxim Levitsky <mlevitsk@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
x86@kernel.org, Borislav Petkov <bp@alien8.de>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [PATCH 1/7] KVM: x86: document AVIC/APICv inhibit reasons
Date: Mon, 6 Jun 2022 21:08:23 +0300 [thread overview]
Message-ID: <20220606180829.102503-2-mlevitsk@redhat.com> (raw)
In-Reply-To: <20220606180829.102503-1-mlevitsk@redhat.com>
These days there are too many AVIC/APICv inhibit
reasons, and it doesn't hurt to have some documentation
for them.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
arch/x86/include/asm/kvm_host.h | 59 +++++++++++++++++++++++++++++++--
1 file changed, 57 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 6cf5d77d78969..d7fb3ade44501 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1065,14 +1065,69 @@ struct kvm_x86_msr_filter {
};
enum kvm_apicv_inhibit {
+
+ /********************************************************************/
+ /* INHIBITs that are relevant to both Intel's APICv and AMD's AVIC. */
+ /********************************************************************/
+
+ /*
+ * APIC acceleration is disabled by a module parameter
+ * and/or not supported in hardware.
+ */
APICV_INHIBIT_REASON_DISABLE,
+
+ /*
+ * APIC acceleration is inhibited because AutoEOI feature is
+ * being used by a HyperV guest.
+ */
APICV_INHIBIT_REASON_HYPERV,
+
+ /*
+ * APIC acceleration is inhibited because the userspace didn't yet
+ * enable the kernel/split irqchip.
+ */
+ APICV_INHIBIT_REASON_ABSENT,
+
+ /* APIC acceleration is inhibited because KVM_GUESTDBG_BLOCKIRQ
+ * (out of band, debug measure of blocking all interrupts on this vCPU)
+ * was enabled, to avoid AVIC/APICv bypassing it.
+ */
+ APICV_INHIBIT_REASON_BLOCKIRQ,
+
+ /******************************************************/
+ /* INHIBITs that are relevant only to the AMD's AVIC. */
+ /******************************************************/
+
+ /*
+ * AVIC is inhibited on a vCPU because it runs a nested guest.
+ *
+ * This is needed because unlike APICv, the peers of this vCPU
+ * cannot use the doorbell mechanism to signal interrupts via AVIC when
+ * a vCPU runs nested.
+ */
APICV_INHIBIT_REASON_NESTED,
+
+ /*
+ * On SVM, the wait for the IRQ window is implemented with pending vIRQ,
+ * which cannot be injected when the AVIC is enabled, thus AVIC
+ * is inhibited while KVM waits for IRQ window.
+ */
APICV_INHIBIT_REASON_IRQWIN,
+
+ /*
+ * PIT (i8254) 're-inject' mode, relies on EOI intercept,
+ * which AVIC doesn't support for edge triggered interrupts.
+ */
APICV_INHIBIT_REASON_PIT_REINJ,
+
+ /*
+ * AVIC is inhibited because the guest has x2apic in its CPUID.
+ */
APICV_INHIBIT_REASON_X2APIC,
- APICV_INHIBIT_REASON_BLOCKIRQ,
- APICV_INHIBIT_REASON_ABSENT,
+
+ /*
+ * AVIC is disabled because SEV doesn't support it.
+ */
APICV_INHIBIT_REASON_SEV,
};
--
2.26.3
next prev parent reply other threads:[~2022-06-06 18:08 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-06 18:08 [PATCH 0/7] KVM: x86: AVIC/APICv patch queue Maxim Levitsky
2022-06-06 18:08 ` Maxim Levitsky [this message]
2022-06-06 18:08 ` [PATCH 2/7] KVM: x86: inhibit APICv/AVIC when the guest and/or host changes either apic id or the apic base from their default values Maxim Levitsky
2022-06-07 7:05 ` Chao Gao
2022-06-07 7:53 ` Maxim Levitsky
2022-06-06 18:08 ` [PATCH 3/7] KVM: x86: SVM: remove avic's broken code that updated APIC ID Maxim Levitsky
2022-06-06 18:08 ` [PATCH 4/7] KVM: x86: SVM: fix avic_kick_target_vcpus_fast Maxim Levitsky
2022-06-08 13:21 ` Paolo Bonzini
2022-06-09 8:13 ` Maxim Levitsky
2022-06-06 18:08 ` [PATCH 5/7] KVM: x86: disable preemption while updating apicv inhibition Maxim Levitsky
2022-06-06 18:08 ` [PATCH 6/7] KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking Maxim Levitsky
2022-06-06 18:08 ` [PATCH 7/7] KVM: x86: SVM: there is no need for preempt safe wrappers for avic_vcpu_load/put Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220606180829.102503-2-mlevitsk@redhat.com \
--to=mlevitsk@redhat.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=suravee.suthikulpanit@amd.com \
--cc=tglx@linutronix.de \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox