From: Maxim Levitsky <mlevitsk@redhat.com>
To: kvm@vger.kernel.org
Cc: Wanpeng Li <wanpengli@tencent.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Sean Christopherson <seanjc@google.com>,
Jim Mattson <jmattson@google.com>,
"H. Peter Anvin" <hpa@zytor.com>, Joerg Roedel <joro@8bytes.org>,
Dave Hansen <dave.hansen@linux.intel.com>,
Ingo Molnar <mingo@redhat.com>,
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
linux-kernel@vger.kernel.org,
Maxim Levitsky <mlevitsk@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
x86@kernel.org, Borislav Petkov <bp@alien8.de>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [PATCH 3/7] KVM: x86: SVM: remove avic's broken code that updated APIC ID
Date: Mon, 6 Jun 2022 21:08:25 +0300 [thread overview]
Message-ID: <20220606180829.102503-4-mlevitsk@redhat.com> (raw)
In-Reply-To: <20220606180829.102503-1-mlevitsk@redhat.com>
AVIC is now inhibited if the guest changes the apic id,
and therefore this code is no longer needed.
There are several ways this code was broken, including:
1. a vCPU was only allowed to change its apic id to an apic id
of an existing vCPU.
2. After such change, the vCPU whose apic id entry was overwritten,
could not correctly change its own apic id, because its own
entry is already overwritten.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
arch/x86/kvm/svm/avic.c | 35 -----------------------------------
1 file changed, 35 deletions(-)
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 8dffd67f60862..072e2c8cc66aa 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -508,35 +508,6 @@ static int avic_handle_ldr_update(struct kvm_vcpu *vcpu)
return ret;
}
-static int avic_handle_apic_id_update(struct kvm_vcpu *vcpu)
-{
- u64 *old, *new;
- struct vcpu_svm *svm = to_svm(vcpu);
- u32 id = kvm_xapic_id(vcpu->arch.apic);
-
- if (vcpu->vcpu_id == id)
- return 0;
-
- old = avic_get_physical_id_entry(vcpu, vcpu->vcpu_id);
- new = avic_get_physical_id_entry(vcpu, id);
- if (!new || !old)
- return 1;
-
- /* We need to move physical_id_entry to new offset */
- *new = *old;
- *old = 0ULL;
- to_svm(vcpu)->avic_physical_id_cache = new;
-
- /*
- * Also update the guest physical APIC ID in the logical
- * APIC ID table entry if already setup the LDR.
- */
- if (svm->ldr_reg)
- avic_handle_ldr_update(vcpu);
-
- return 0;
-}
-
static void avic_handle_dfr_update(struct kvm_vcpu *vcpu)
{
struct vcpu_svm *svm = to_svm(vcpu);
@@ -555,10 +526,6 @@ static int avic_unaccel_trap_write(struct kvm_vcpu *vcpu)
AVIC_UNACCEL_ACCESS_OFFSET_MASK;
switch (offset) {
- case APIC_ID:
- if (avic_handle_apic_id_update(vcpu))
- return 0;
- break;
case APIC_LDR:
if (avic_handle_ldr_update(vcpu))
return 0;
@@ -650,8 +617,6 @@ int avic_init_vcpu(struct vcpu_svm *svm)
void avic_apicv_post_state_restore(struct kvm_vcpu *vcpu)
{
- if (avic_handle_apic_id_update(vcpu) != 0)
- return;
avic_handle_dfr_update(vcpu);
avic_handle_ldr_update(vcpu);
}
--
2.26.3
next prev parent reply other threads:[~2022-06-06 18:08 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-06 18:08 [PATCH 0/7] KVM: x86: AVIC/APICv patch queue Maxim Levitsky
2022-06-06 18:08 ` [PATCH 1/7] KVM: x86: document AVIC/APICv inhibit reasons Maxim Levitsky
2022-06-06 18:08 ` [PATCH 2/7] KVM: x86: inhibit APICv/AVIC when the guest and/or host changes either apic id or the apic base from their default values Maxim Levitsky
2022-06-07 7:05 ` Chao Gao
2022-06-07 7:53 ` Maxim Levitsky
2022-06-06 18:08 ` Maxim Levitsky [this message]
2022-06-06 18:08 ` [PATCH 4/7] KVM: x86: SVM: fix avic_kick_target_vcpus_fast Maxim Levitsky
2022-06-08 13:21 ` Paolo Bonzini
2022-06-09 8:13 ` Maxim Levitsky
2022-06-06 18:08 ` [PATCH 5/7] KVM: x86: disable preemption while updating apicv inhibition Maxim Levitsky
2022-06-06 18:08 ` [PATCH 6/7] KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking Maxim Levitsky
2022-06-06 18:08 ` [PATCH 7/7] KVM: x86: SVM: there is no need for preempt safe wrappers for avic_vcpu_load/put Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220606180829.102503-4-mlevitsk@redhat.com \
--to=mlevitsk@redhat.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=suravee.suthikulpanit@amd.com \
--cc=tglx@linutronix.de \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox