From: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
To: Thomas Huth <thuth@redhat.com>,
Janosch Frank <frankja@linux.ibm.com>,
Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Janis Schoetterl-Glausch <scgl@linux.ibm.com>,
David Hildenbrand <david@redhat.com>,
kvm@vger.kernel.org, linux-s390@vger.kernel.org
Subject: [kvm-unit-tests PATCH v4 1/3] s390x: Test TEID values in storage key test
Date: Wed, 8 Jun 2022 19:45:34 +0200 [thread overview]
Message-ID: <20220608174536.1700357-2-scgl@linux.ibm.com> (raw)
In-Reply-To: <20220608174536.1700357-1-scgl@linux.ibm.com>
On a protection exception, test that the Translation-Exception
Identification (TEID) values are correct given the circumstances of the
particular test.
The meaning of the TEID values is dependent on the installed
suppression-on-protection facility.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
---
s390x/skey.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 74 insertions(+), 6 deletions(-)
diff --git a/s390x/skey.c b/s390x/skey.c
index 445476a0..d05ebc09 100644
--- a/s390x/skey.c
+++ b/s390x/skey.c
@@ -8,6 +8,7 @@
* Janosch Frank <frankja@linux.vnet.ibm.com>
*/
#include <libcflat.h>
+#include <asm/arch_def.h>
#include <asm/asm-offsets.h>
#include <asm/interrupt.h>
#include <vmalloc.h>
@@ -158,6 +159,73 @@ static void test_test_protection(void)
report_prefix_pop();
}
+enum access {
+ ACC_STORE = 1,
+ ACC_FETCH = 2,
+ ACC_UPDATE = 3,
+};
+
+enum protection {
+ PROT_STORE = 1,
+ PROT_FETCH_STORE = 3,
+};
+
+static void check_key_prot_exc(enum access access, enum protection prot)
+{
+ union teid teid;
+ int access_code;
+ bool dat;
+
+ check_pgm_int_code(PGM_INT_CODE_PROTECTION);
+ report_prefix_push("TEID");
+ teid.val = lowcore.trans_exc_id;
+ switch (get_supp_on_prot_facility()) {
+ case SOP_NONE:
+ break;
+ case SOP_BASIC:
+ dat = extract_psw_mask() & PSW_MASK_DAT;
+ report(!teid.sop_teid_predictable || !dat || !teid.sop_acc_list,
+ "valid protection code");
+ break;
+ case SOP_ENHANCED_1:
+ report(!teid.sop_teid_predictable, "valid protection code");
+ break;
+ case SOP_ENHANCED_2:
+ switch (teid_esop2_prot_code(teid)) {
+ case PROT_KEY:
+ access_code = teid.acc_exc_f_s;
+
+ switch (access_code) {
+ case 0:
+ report_pass("valid access code");
+ break;
+ case 1:
+ case 2:
+ report((access & access_code) && (prot & access_code),
+ "valid access code");
+ break;
+ case 3:
+ /*
+ * This is incorrect in that reserved values
+ * should be ignored, but kvm should not return
+ * a reserved value and having a test for that
+ * is more valuable.
+ */
+ report_fail("valid access code");
+ break;
+ }
+ /* fallthrough */
+ case PROT_KEY_LAP:
+ report_pass("valid protection code");
+ break;
+ default:
+ report_fail("valid protection code");
+ }
+ break;
+ }
+ report_prefix_pop();
+}
+
/*
* Perform STORE CPU ADDRESS (STAP) instruction while temporarily executing
* with access key 1.
@@ -199,7 +267,7 @@ static void test_store_cpu_address(void)
expect_pgm_int();
*out = 0xbeef;
store_cpu_address_key_1(out);
- check_pgm_int_code(PGM_INT_CODE_PROTECTION);
+ check_key_prot_exc(ACC_STORE, PROT_STORE);
report(*out == 0xbeef, "no store occurred");
report_prefix_pop();
@@ -210,7 +278,7 @@ static void test_store_cpu_address(void)
expect_pgm_int();
*out = 0xbeef;
store_cpu_address_key_1(out);
- check_pgm_int_code(PGM_INT_CODE_PROTECTION);
+ check_key_prot_exc(ACC_STORE, PROT_STORE);
report(*out == 0xbeef, "no store occurred");
report_prefix_pop();
@@ -228,7 +296,7 @@ static void test_store_cpu_address(void)
expect_pgm_int();
*out = 0xbeef;
store_cpu_address_key_1(out);
- check_pgm_int_code(PGM_INT_CODE_PROTECTION);
+ check_key_prot_exc(ACC_STORE, PROT_STORE);
report(*out == 0xbeef, "no store occurred");
report_prefix_pop();
@@ -314,7 +382,7 @@ static void test_set_prefix(void)
set_storage_key(pagebuf, 0x28, 0);
expect_pgm_int();
set_prefix_key_1(prefix_ptr);
- check_pgm_int_code(PGM_INT_CODE_PROTECTION);
+ check_key_prot_exc(ACC_FETCH, PROT_FETCH_STORE);
report(get_prefix() == old_prefix, "did not set prefix");
report_prefix_pop();
@@ -327,7 +395,7 @@ static void test_set_prefix(void)
install_page(root, virt_to_pte_phys(root, pagebuf), 0);
set_prefix_key_1((uint32_t *)0);
install_page(root, 0, 0);
- check_pgm_int_code(PGM_INT_CODE_PROTECTION);
+ check_key_prot_exc(ACC_FETCH, PROT_FETCH_STORE);
report(get_prefix() == old_prefix, "did not set prefix");
report_prefix_pop();
@@ -351,7 +419,7 @@ static void test_set_prefix(void)
install_page(root, virt_to_pte_phys(root, pagebuf), 0);
set_prefix_key_1(OPAQUE_PTR(2048));
install_page(root, 0, 0);
- check_pgm_int_code(PGM_INT_CODE_PROTECTION);
+ check_key_prot_exc(ACC_FETCH, PROT_FETCH_STORE);
report(get_prefix() == old_prefix, "did not set prefix");
report_prefix_pop();
--
2.33.1
next prev parent reply other threads:[~2022-06-08 17:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-08 17:45 [kvm-unit-tests PATCH v4 0/4] More skey instr. emulation test Janis Schoetterl-Glausch
2022-06-08 17:45 ` Janis Schoetterl-Glausch [this message]
2022-06-08 17:45 ` [kvm-unit-tests PATCH v4 2/3] s390x: Test effect of storage keys on some more instructions Janis Schoetterl-Glausch
2022-06-08 17:45 ` [kvm-unit-tests PATCH v4 3/3] s390x: Test effect of storage keys on diag 308 Janis Schoetterl-Glausch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220608174536.1700357-2-scgl@linux.ibm.com \
--to=scgl@linux.ibm.com \
--cc=david@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox