From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>
Cc: Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Michael Kelley <mikelley@microsoft.com>,
Siddharth Chandrasekaran <sidcha@amazon.de>,
Yuan Yao <yuan.yao@linux.intel.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v9 10/40] KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in kvm_hv_send_ipi()
Date: Wed, 3 Aug 2022 15:40:40 +0200 [thread overview]
Message-ID: <20220803134110.397885-11-vkuznets@redhat.com> (raw)
In-Reply-To: <20220803134110.397885-1-vkuznets@redhat.com>
Get rid of on-stack allocation of vcpu_mask and optimize kvm_hv_send_ipi()
for a smaller number of vCPUs in the request. When Hyper-V TLB flush
is in use, HvSendSyntheticClusterIpi{,Ex} calls are not commonly used to
send IPIs to a large number of vCPUs (and are rarely used in general).
Introduce hv_is_vp_in_sparse_set() to directly check if the specified
VP_ID is present in sparse vCPU set.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
arch/x86/kvm/hyperv.c | 37 ++++++++++++++++++++++++++-----------
1 file changed, 26 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index 19899cce2927..b903c9de8d39 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -1747,6 +1747,25 @@ static void sparse_set_to_vcpu_mask(struct kvm *kvm, u64 *sparse_banks,
}
}
+static bool hv_is_vp_in_sparse_set(u32 vp_id, u64 valid_bank_mask, u64 sparse_banks[])
+{
+ int bank, sbank = 0;
+
+ if (!test_bit(vp_id / HV_VCPUS_PER_SPARSE_BANK,
+ (unsigned long *)&valid_bank_mask))
+ return false;
+
+ for_each_set_bit(bank, (unsigned long *)&valid_bank_mask,
+ KVM_HV_MAX_SPARSE_VCPU_SET_BITS) {
+ if (bank == vp_id / HV_VCPUS_PER_SPARSE_BANK)
+ break;
+ sbank++;
+ }
+
+ return test_bit(vp_id % HV_VCPUS_PER_SPARSE_BANK,
+ (unsigned long *)&sparse_banks[sbank]);
+}
+
struct kvm_hv_hcall {
u64 param;
u64 ingpa;
@@ -2029,8 +2048,8 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
((u64)hc->rep_cnt << HV_HYPERCALL_REP_COMP_OFFSET);
}
-static void kvm_send_ipi_to_many(struct kvm *kvm, u32 vector,
- unsigned long *vcpu_bitmap)
+static void kvm_hv_send_ipi_to_many(struct kvm *kvm, u32 vector,
+ u64 *sparse_banks, u64 valid_bank_mask)
{
struct kvm_lapic_irq irq = {
.delivery_mode = APIC_DM_FIXED,
@@ -2040,7 +2059,10 @@ static void kvm_send_ipi_to_many(struct kvm *kvm, u32 vector,
unsigned long i;
kvm_for_each_vcpu(i, vcpu, kvm) {
- if (vcpu_bitmap && !test_bit(i, vcpu_bitmap))
+ if (sparse_banks &&
+ !hv_is_vp_in_sparse_set(kvm_hv_get_vpindex(vcpu),
+ valid_bank_mask,
+ sparse_banks))
continue;
/* We fail only when APIC is disabled */
@@ -2053,7 +2075,6 @@ static u64 kvm_hv_send_ipi(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
struct kvm *kvm = vcpu->kvm;
struct hv_send_ipi_ex send_ipi_ex;
struct hv_send_ipi send_ipi;
- DECLARE_BITMAP(vcpu_mask, KVM_MAX_VCPUS);
u64 valid_bank_mask;
u64 sparse_banks[KVM_HV_MAX_SPARSE_VCPU_SET_BITS];
u32 vector;
@@ -2115,13 +2136,7 @@ static u64 kvm_hv_send_ipi(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
if ((vector < HV_IPI_LOW_VECTOR) || (vector > HV_IPI_HIGH_VECTOR))
return HV_STATUS_INVALID_HYPERCALL_INPUT;
- if (all_cpus) {
- kvm_send_ipi_to_many(kvm, vector, NULL);
- } else {
- sparse_set_to_vcpu_mask(kvm, sparse_banks, valid_bank_mask, vcpu_mask);
-
- kvm_send_ipi_to_many(kvm, vector, vcpu_mask);
- }
+ kvm_hv_send_ipi_to_many(kvm, vector, all_cpus ? NULL : sparse_banks, valid_bank_mask);
ret_success:
return HV_STATUS_SUCCESS;
--
2.35.3
next prev parent reply other threads:[~2022-08-03 13:42 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-03 13:40 [PATCH v9 00/40] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush features Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 01/40] KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush' Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 02/40] KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flag Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 03/40] KVM: x86: hyper-v: Introduce TLB flush fifo Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 04/40] KVM: x86: hyper-v: Add helper to read hypercall data for array Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 05/40] KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 06/40] KVM: x86: hyper-v: Expose support for extended gva ranges for flush hypercalls Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 07/40] KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 08/40] x86/hyperv: Introduce HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK constants Vitaly Kuznetsov
2022-08-03 13:40 ` [PATCH v9 09/40] KVM: x86: hyper-v: Use HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK instead of raw '64' Vitaly Kuznetsov
2022-08-03 13:40 ` Vitaly Kuznetsov [this message]
2022-08-03 13:45 ` [PATCH v9 11/40] KVM: x86: hyper-v: Create a separate fifo for L2 TLB flush Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 12/40] KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead of on-stack 'sparse_banks' Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 13/40] KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in use Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 14/40] KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_id Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 15/40] KVM: x86: Introduce .hv_inject_synthetic_vmexit_post_tlb_flush() nested hook Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 16/40] KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall() Vitaly Kuznetsov
2022-08-03 13:45 ` [PATCH v9 17/40] KVM: x86: hyper-v: L2 TLB flush Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 18/40] KVM: x86: hyper-v: Introduce fast guest_hv_cpuid_has_l2_tlb_flush() check Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 19/40] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 20/40] KVM: nVMX: hyper-v: Cache VP assist page in 'struct kvm_vcpu_hv' Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 21/40] KVM: nVMX: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 22/40] KVM: nSVM: " Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 23/40] KVM: x86: Expose Hyper-V L2 TLB flush feature Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 24/40] KVM: selftests: Better XMM read/write helpers Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 25/40] KVM: selftests: Move HYPERV_LINUX_OS_ID definition to a common header Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 26/40] KVM: selftests: Move the function doing Hyper-V hypercall " Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 27/40] KVM: selftests: Hyper-V PV IPI selftest Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 28/40] KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too Vitaly Kuznetsov
2022-08-03 14:29 ` Andrew Jones
2022-08-03 13:46 ` [PATCH v9 29/40] KVM: selftests: Export vm_vaddr_unused_gap() to make it possible to request unmapped ranges Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 30/40] KVM: selftests: Export _vm_get_page_table_entry() Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 31/40] KVM: selftests: Hyper-V PV TLB flush selftest Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 32/40] KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 33/40] KVM: selftests: Sync 'struct hv_vp_assist_page' " Vitaly Kuznetsov
2022-08-03 13:46 ` [PATCH v9 34/40] KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.h Vitaly Kuznetsov
2022-08-03 13:47 ` [PATCH v9 35/40] KVM: selftests: Split off load_evmcs() from load_vmcs() Vitaly Kuznetsov
2022-08-03 13:47 ` [PATCH v9 36/40] KVM: selftests: Create a vendor independent helper to allocate Hyper-V specific test pages Vitaly Kuznetsov
2022-08-03 13:47 ` [PATCH v9 37/40] KVM: selftests: Allocate Hyper-V partition assist page Vitaly Kuznetsov
2022-08-03 13:47 ` [PATCH v9 38/40] KVM: selftests: evmcs_test: Introduce L2 TLB flush test Vitaly Kuznetsov
2022-08-03 13:47 ` [PATCH v9 39/40] KVM: selftests: hyperv_svm_test: " Vitaly Kuznetsov
2022-08-03 13:47 ` [PATCH v9 40/40] KVM: selftests: Rename 'evmcs_test' to 'hyperv_evmcs' Vitaly Kuznetsov
2022-08-30 13:43 ` [PATCH v9 00/40] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush features Vitaly Kuznetsov
2022-08-30 16:27 ` Sean Christopherson
2022-09-21 15:15 ` Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220803134110.397885-11-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mikelley@microsoft.com \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=sidcha@amazon.de \
--cc=wanpengli@tencent.com \
--cc=yuan.yao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox