From: Maxim Levitsky <mlevitsk@redhat.com>
To: kvm@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>,
Cathy Avery <cavery@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [kvm-unit-tests PATCH 02/16] x86: add few helper functions for apic local timer
Date: Thu, 20 Oct 2022 18:23:50 +0300 [thread overview]
Message-ID: <20221020152404.283980-3-mlevitsk@redhat.com> (raw)
In-Reply-To: <20221020152404.283980-1-mlevitsk@redhat.com>
Add a few functions to apic.c to make it easier to enable and disable
the local apic timer.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
lib/x86/apic.c | 37 +++++++++++++++++++++++++++++++++++++
lib/x86/apic.h | 6 ++++++
2 files changed, 43 insertions(+)
diff --git a/lib/x86/apic.c b/lib/x86/apic.c
index 5131525a..dc6d3862 100644
--- a/lib/x86/apic.c
+++ b/lib/x86/apic.c
@@ -256,3 +256,40 @@ void init_apic_map(void)
id_map[j++] = i;
}
}
+
+void apic_setup_timer(int vector, bool periodic)
+{
+ /* APIC runs with 'CPU core clock' divided by value in APIC_TDCR */
+
+ u32 lvtt = vector |
+ (periodic ? APIC_LVT_TIMER_PERIODIC : APIC_LVT_TIMER_ONESHOT);
+
+ apic_cleanup_timer();
+ apic_write(APIC_TDCR, APIC_TDR_DIV_1);
+ apic_write(APIC_LVTT, lvtt);
+}
+
+void apic_start_timer(u32 counter)
+{
+ apic_write(APIC_TMICT, counter);
+}
+
+void apic_stop_timer(void)
+{
+ apic_write(APIC_TMICT, 0);
+}
+
+void apic_cleanup_timer(void)
+{
+ u32 lvtt = apic_read(APIC_LVTT);
+
+ // stop the counter
+ apic_stop_timer();
+
+ // mask the timer interrupt
+ apic_write(APIC_LVTT, lvtt | APIC_LVT_MASKED);
+
+ // ensure that a pending timer is serviced
+ irq_enable();
+ irq_disable();
+}
diff --git a/lib/x86/apic.h b/lib/x86/apic.h
index 6d27f047..db691e2a 100644
--- a/lib/x86/apic.h
+++ b/lib/x86/apic.h
@@ -58,6 +58,12 @@ void disable_apic(void);
void reset_apic(void);
void init_apic_map(void);
+void apic_cleanup_timer(void);
+void apic_setup_timer(int vector, bool periodic);
+
+void apic_start_timer(u32 counter);
+void apic_stop_timer(void);
+
/* Converts byte-addressable APIC register offset to 4-byte offset. */
static inline u32 apic_reg_index(u32 reg)
{
--
2.26.3
next prev parent reply other threads:[~2022-10-20 15:24 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-20 15:23 [kvm-unit-tests PATCH 00/16] kvm-unit-tests: set of fixes and new tests Maxim Levitsky
2022-10-20 15:23 ` [kvm-unit-tests PATCH 01/16] x86: make irq_enable avoid the interrupt shadow Maxim Levitsky
2022-10-20 18:01 ` Sean Christopherson
2022-10-24 12:36 ` Maxim Levitsky
2022-10-24 22:49 ` Sean Christopherson
2022-10-27 10:16 ` Maxim Levitsky
2022-10-27 15:50 ` Sean Christopherson
2022-10-27 17:10 ` Maxim Levitsky
2022-10-20 15:23 ` Maxim Levitsky [this message]
2022-10-20 19:14 ` [kvm-unit-tests PATCH 02/16] x86: add few helper functions for apic local timer Sean Christopherson
2022-10-24 12:37 ` Maxim Levitsky
2022-10-24 16:10 ` Sean Christopherson
2022-10-27 10:19 ` Maxim Levitsky
2022-10-27 15:54 ` Sean Christopherson
2022-10-27 17:11 ` Maxim Levitsky
2022-10-20 15:23 ` [kvm-unit-tests PATCH 03/16] svm: use irq_enable instead of sti/nop Maxim Levitsky
2022-10-20 15:23 ` [kvm-unit-tests PATCH 04/16] svm: make svm_intr_intercept_mix_if/gif test a bit more robust Maxim Levitsky
2022-10-20 15:23 ` [kvm-unit-tests PATCH 05/16] svm: use apic_start_timer/apic_stop_timer instead of open coding it Maxim Levitsky
2022-10-20 15:23 ` [kvm-unit-tests PATCH 06/16] x86: Add test for #SMI during interrupt window Maxim Levitsky
2022-10-20 15:23 ` [kvm-unit-tests PATCH 07/16] x86: Add a simple test for SYSENTER instruction Maxim Levitsky
2022-10-20 19:25 ` Sean Christopherson
2022-10-24 12:38 ` Maxim Levitsky
2022-10-20 15:23 ` [kvm-unit-tests PATCH 08/16] svm: add nested shutdown test Maxim Levitsky
2022-10-20 15:26 ` Maxim Levitsky
2022-10-20 19:06 ` Sean Christopherson
2022-10-24 12:39 ` Maxim Levitsky
2022-10-20 15:23 ` [kvm-unit-tests PATCH 09/16] svm: move svm spec definitions to lib/x86/svm.h Maxim Levitsky
2022-10-20 19:08 ` Sean Christopherson
2022-10-20 15:23 ` [kvm-unit-tests PATCH 10/16] svm: move some svm support functions into lib/x86/svm_lib.h Maxim Levitsky
2022-10-20 15:23 ` [kvm-unit-tests PATCH 11/16] svm: add svm_suported Maxim Levitsky
2022-10-20 18:21 ` Sean Christopherson
2022-10-24 12:40 ` Maxim Levitsky
2022-10-20 15:24 ` [kvm-unit-tests PATCH 12/16] svm: move setup_svm to svm_lib.c Maxim Levitsky
2022-10-20 15:24 ` [kvm-unit-tests PATCH 13/16] svm: move vmcb_ident " Maxim Levitsky
2022-10-20 18:37 ` Sean Christopherson
2022-10-24 12:46 ` Maxim Levitsky
2022-10-20 15:24 ` [kvm-unit-tests PATCH 14/16] svm: rewerite vm entry macros Maxim Levitsky
2022-10-20 18:55 ` Sean Christopherson
2022-10-24 12:45 ` Maxim Levitsky
2022-10-24 19:56 ` Sean Christopherson
2022-10-27 12:07 ` Maxim Levitsky
2022-10-27 19:39 ` Sean Christopherson
2022-10-20 15:24 ` [kvm-unit-tests PATCH 15/16] svm: introduce svm_vcpu Maxim Levitsky
2022-10-20 19:02 ` Sean Christopherson
2022-10-24 12:46 ` Maxim Levitsky
2022-10-20 15:24 ` [kvm-unit-tests PATCH 16/16] add IPI loss stress test Maxim Levitsky
2022-10-20 20:23 ` Sean Christopherson
2022-10-24 12:54 ` Maxim Levitsky
2022-10-24 17:19 ` Sean Christopherson
2022-10-27 11:00 ` Maxim Levitsky
2022-10-27 18:41 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221020152404.283980-3-mlevitsk@redhat.com \
--to=mlevitsk@redhat.com \
--cc=cavery@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox