From: Maxim Levitsky <mlevitsk@redhat.com>
To: kvm@vger.kernel.org
Cc: "Andrew Jones" <drjones@redhat.com>,
"Alexandru Elisei" <alexandru.elisei@arm.com>,
"Maxim Levitsky" <mlevitsk@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Claudio Imbrenda" <imbrenda@linux.ibm.com>,
"Thomas Huth" <thuth@redhat.com>,
"Alex Bennée" <alex.bennee@linaro.org>,
"Nico Boehr" <nrb@linux.ibm.com>,
"Cathy Avery" <cavery@redhat.com>,
"Janosch Frank" <frankja@linux.ibm.com>
Subject: [kvm-unit-tests PATCH v3 27/27] x86: ipi_stress: add optional SVM support
Date: Tue, 22 Nov 2022 18:11:52 +0200 [thread overview]
Message-ID: <20221122161152.293072-28-mlevitsk@redhat.com> (raw)
In-Reply-To: <20221122161152.293072-1-mlevitsk@redhat.com>
Allow some vCPUs to be in SVM nested mode while waiting for
an interrupt.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
x86/ipi_stress.c | 79 +++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 78 insertions(+), 1 deletion(-)
diff --git a/x86/ipi_stress.c b/x86/ipi_stress.c
index dea3e605..1a4c5510 100644
--- a/x86/ipi_stress.c
+++ b/x86/ipi_stress.c
@@ -12,10 +12,12 @@
#include "types.h"
#include "alloc_page.h"
#include "vmalloc.h"
+#include "svm_lib.h"
#include "random.h"
u64 num_iterations = 100000;
float hlt_prob = 0.1;
+bool use_svm;
volatile bool end_test;
#define APIC_TIMER_PERIOD (1000*1000*1000)
@@ -25,6 +27,7 @@ struct cpu_test_state {
u64 last_isr_count;
struct random_state random;
int smp_id;
+ struct svm_vcpu vcpu;
} *cpu_states;
@@ -71,6 +74,62 @@ static void wait_for_ipi(struct cpu_test_state *state)
assert(state->isr_count == old_count + 1);
}
+#ifdef __x86_64__
+static void l2_guest_wait_for_ipi(struct cpu_test_state *state)
+{
+ wait_for_ipi(state);
+ asm volatile("vmmcall");
+}
+
+static void l2_guest_dummy(void)
+{
+ while (true)
+ asm volatile("vmmcall");
+}
+
+static void wait_for_ipi_in_l2(struct cpu_test_state *state)
+{
+ u64 old_count = state->isr_count;
+ struct svm_vcpu *vcpu = &state->vcpu;
+ bool poll_in_the_guest;
+
+ /*
+ * if poll_in_the_guest is true, then the guest will run
+ * with interrupts disabled and it will enable them for one instruction
+ * (sometimes together with halting) until it receives an interrupts
+ *
+ * if poll_in_the_guest is false, the guest will always have
+ * interrupts enabled and will usually receive the interrupt
+ * right away, but in case it didn't we will run the guest again
+ * until it does.
+ *
+ */
+ poll_in_the_guest = random_decision(&state->random, 50);
+
+ vcpu->regs.rdi = (u64)state;
+ vcpu->regs.rsp = (ulong)vcpu->stack;
+
+ vcpu->vmcb->save.rip = poll_in_the_guest ?
+ (ulong)l2_guest_wait_for_ipi :
+ (ulong)l2_guest_dummy;
+
+ if (!poll_in_the_guest)
+ vcpu->vmcb->save.rflags |= X86_EFLAGS_IF;
+ else
+ vcpu->vmcb->save.rflags &= ~X86_EFLAGS_IF;
+
+ do {
+ asm volatile("clgi;sti");
+ SVM_VMRUN(vcpu);
+ asm volatile("cli;stgi");
+ assert(vcpu->vmcb->control.exit_code == SVM_EXIT_VMMCALL);
+
+ if (poll_in_the_guest)
+ assert(old_count < state->isr_count);
+
+ } while (old_count == state->isr_count);
+}
+#endif
static void vcpu_init(void *)
{
@@ -85,6 +144,11 @@ static void vcpu_init(void *)
state->random = get_prng();
state->isr_count = 0;
state->smp_id = smp_id();
+
+#ifdef __x86_64__
+ if (use_svm)
+ svm_vcpu_init(&state->vcpu);
+#endif
}
static void vcpu_code(void *)
@@ -111,7 +175,12 @@ static void vcpu_code(void *)
break;
// wait for the IPI interrupt chain to come back to us
- wait_for_ipi(state);
+#if __x86_64__
+ if (use_svm && random_decision(&state->random, 20))
+ wait_for_ipi_in_l2(state);
+ else
+#endif
+ wait_for_ipi(state);
}
}
@@ -137,6 +206,14 @@ int main(int argc, void **argv)
setup_vm();
init_prng();
+#ifdef __x86_64__
+ if (this_cpu_has(X86_FEATURE_SVM)) {
+ use_svm = true;
+ if (!setup_svm())
+ use_svm = false;
+ }
+#endif
+
cpu_states = calloc(ncpus, sizeof(cpu_states[0]));
printf("found %d cpus\n", ncpus);
--
2.34.3
next prev parent reply other threads:[~2022-11-22 16:16 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-22 16:11 [kvm-unit-tests PATCH v3 00/27] kvm-unit-tests: set of fixes and new tests Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 01/27] x86: replace irq_{enable|disable}() with sti()/cli() Maxim Levitsky
2022-12-01 13:46 ` Emanuele Giuseppe Esposito
2022-12-06 13:55 ` Maxim Levitsky
2022-12-06 14:15 ` Emanuele Giuseppe Esposito
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 02/27] x86: introduce sti_nop() and sti_nop_cli() Maxim Levitsky
2022-12-01 13:46 ` Emanuele Giuseppe Esposito
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 03/27] x86: add few helper functions for apic local timer Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 04/27] svm: remove nop after stgi/clgi Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 05/27] svm: make svm_intr_intercept_mix_if/gif test a bit more robust Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 06/27] svm: use apic_start_timer/apic_stop_timer instead of open coding it Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 07/27] x86: Add test for #SMI during interrupt window Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 08/27] x86: Add a simple test for SYSENTER instruction Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 09/27] svm: add simple nested shutdown test Maxim Levitsky
2022-12-01 13:46 ` Emanuele Giuseppe Esposito
2022-12-06 13:56 ` Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 10/27] SVM: add two tests for exitintinto on exception Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 11/27] lib: Add random number generator Maxim Levitsky
2022-11-23 9:28 ` Claudio Imbrenda
2022-11-23 12:54 ` Andrew Jones
2022-12-06 13:57 ` Maxim Levitsky
2022-12-06 14:07 ` Maxim Levitsky
2022-12-14 10:33 ` Claudio Imbrenda
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 12/27] x86: add IPI stress test Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 13/27] svm: remove get_npt_pte extern Maxim Levitsky
2022-12-01 13:46 ` Emanuele Giuseppe Esposito
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 14/27] svm: move svm spec definitions to lib/x86/svm.h Maxim Levitsky
2022-12-01 13:54 ` Emanuele Giuseppe Esposito
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 15/27] svm: move some svm support functions into lib/x86/svm_lib.h Maxim Levitsky
2022-12-01 13:59 ` Emanuele Giuseppe Esposito
2022-12-06 14:10 ` Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 16/27] svm: move setup_svm() to svm_lib.c Maxim Levitsky
2022-12-01 16:14 ` Emanuele Giuseppe Esposito
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 17/27] svm: correctly skip if NPT not supported Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 18/27] svm: move vmcb_ident to svm_lib.c Maxim Levitsky
2022-12-01 16:18 ` Emanuele Giuseppe Esposito
2022-12-06 14:11 ` Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 19/27] svm: rewerite vm entry macros Maxim Levitsky
2022-12-02 10:14 ` Emanuele Giuseppe Esposito
2022-12-06 13:56 ` Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 20/27] svm: move v2 tests run into test_run Maxim Levitsky
2022-12-02 9:53 ` Emanuele Giuseppe Esposito
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 21/27] svm: cleanup the default_prepare Maxim Levitsky
2022-12-02 9:45 ` Emanuele Giuseppe Esposito
2022-12-06 13:56 ` Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 22/27] svm: introduce svm_vcpu Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 23/27] svm: introduce struct svm_test_context Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 24/27] svm: use svm_test_context in v2 tests Maxim Levitsky
2022-12-02 10:27 ` Emanuele Giuseppe Esposito
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 25/27] svm: move nested vcpu to test context Maxim Levitsky
2022-12-02 10:22 ` Emanuele Giuseppe Esposito
2022-12-06 14:29 ` Maxim Levitsky
2022-11-22 16:11 ` [kvm-unit-tests PATCH v3 26/27] svm: move test_guest_func " Maxim Levitsky
2022-12-02 10:28 ` Emanuele Giuseppe Esposito
2022-11-22 16:11 ` Maxim Levitsky [this message]
2023-06-07 23:25 ` [kvm-unit-tests PATCH v3 00/27] kvm-unit-tests: set of fixes and new tests Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221122161152.293072-28-mlevitsk@redhat.com \
--to=mlevitsk@redhat.com \
--cc=alex.bennee@linaro.org \
--cc=alexandru.elisei@arm.com \
--cc=cavery@redhat.com \
--cc=drjones@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=nrb@linux.ibm.com \
--cc=pbonzini@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox