From: Nico Boehr <nrb@linux.ibm.com>
To: kvm@vger.kernel.org
Cc: frankja@linux.ibm.com, imbrenda@linux.ibm.com, thuth@redhat.com,
pbonzini@redhat.com, andrew.jones@linux.dev, lvivier@redhat.com
Subject: [kvm-unit-tests PATCH v2 3/4] s390x: use migrate_once() in migration tests
Date: Fri, 9 Dec 2022 14:48:08 +0100 [thread overview]
Message-ID: <20221209134809.34532-4-nrb@linux.ibm.com> (raw)
In-Reply-To: <20221209134809.34532-1-nrb@linux.ibm.com>
migrate_once() can simplify the control flow in migration-skey and
migration-cmm.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
---
s390x/Makefile | 1 +
s390x/migration-cmm.c | 25 ++++++++-----------------
s390x/migration-sck.c | 4 ++--
s390x/migration-skey.c | 15 +++++----------
s390x/migration.c | 7 ++-----
5 files changed, 18 insertions(+), 34 deletions(-)
diff --git a/s390x/Makefile b/s390x/Makefile
index bf1504f9d58c..52a9d821974e 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -85,6 +85,7 @@ cflatobjs += lib/alloc_page.o
cflatobjs += lib/vmalloc.o
cflatobjs += lib/alloc_phys.o
cflatobjs += lib/getchar.o
+cflatobjs += lib/migrate.o
cflatobjs += lib/s390x/io.o
cflatobjs += lib/s390x/stack.o
cflatobjs += lib/s390x/sclp.o
diff --git a/s390x/migration-cmm.c b/s390x/migration-cmm.c
index aa7910ca76bf..eef45f5f8fb7 100644
--- a/s390x/migration-cmm.c
+++ b/s390x/migration-cmm.c
@@ -9,6 +9,7 @@
*/
#include <libcflat.h>
+#include <migrate.h>
#include <asm/interrupt.h>
#include <asm/page.h>
#include <asm/cmm.h>
@@ -39,8 +40,7 @@ static void test_migration(void)
essa(ESSA_SET_POT_VOLATILE, (unsigned long)pagebuf[i + 3]);
}
- puts("Please migrate me, then press return\n");
- (void)getchar();
+ migrate_once();
for (i = 0; i < NUM_PAGES; i++) {
actual_state = essa(ESSA_GET_STATE, (unsigned long)pagebuf[i]);
@@ -53,25 +53,16 @@ static void test_migration(void)
int main(void)
{
- bool has_essa = check_essa_available();
-
report_prefix_push("migration-cmm");
- if (!has_essa) {
- report_skip("ESSA is not available");
-
- /*
- * If we just exit and don't ask migrate_cmd to migrate us, it
- * will just hang forever. Hence, also ask for migration when we
- * skip this test alltogether.
- */
- puts("Please migrate me, then press return\n");
- (void)getchar();
- goto done;
+ if (!check_essa_available()) {
+ report_skip("ESSA is not available");
+ } else {
+ test_migration();
}
- test_migration();
-done:
+ migrate_once();
+
report_prefix_pop();
return report_summary();
}
diff --git a/s390x/migration-sck.c b/s390x/migration-sck.c
index 2d9a195ab4c4..2a9c87071643 100644
--- a/s390x/migration-sck.c
+++ b/s390x/migration-sck.c
@@ -9,6 +9,7 @@
*/
#include <libcflat.h>
+#include <migrate.h>
#include <asm/time.h>
static void test_sck_migration(void)
@@ -30,8 +31,7 @@ static void test_sck_migration(void)
report(!cc, "clock running after set");
report(now_after_set >= time_to_set, "TOD clock value is larger than what has been set");
- puts("Please migrate me, then press return\n");
- (void)getchar();
+ migrate_once();
cc = stckf(&now_after_migration);
report(!cc, "clock still set");
diff --git a/s390x/migration-skey.c b/s390x/migration-skey.c
index b7bd82581abe..438a4be95702 100644
--- a/s390x/migration-skey.c
+++ b/s390x/migration-skey.c
@@ -9,6 +9,7 @@
*/
#include <libcflat.h>
+#include <migrate.h>
#include <asm/facility.h>
#include <asm/page.h>
#include <asm/mem.h>
@@ -35,8 +36,7 @@ static void test_migration(void)
set_storage_key(pagebuf[i], key_to_set, 1);
}
- puts("Please migrate me, then press return\n");
- (void)getchar();
+ migrate_once();
for (i = 0; i < NUM_PAGES; i++) {
actual_key.val = get_storage_key(pagebuf[i]);
@@ -64,20 +64,15 @@ static void test_migration(void)
int main(void)
{
report_prefix_push("migration-skey");
+
if (test_facility(169)) {
report_skip("storage key removal facility is active");
-
- /*
- * If we just exit and don't ask migrate_cmd to migrate us, it
- * will just hang forever. Hence, also ask for migration when we
- * skip this test altogether.
- */
- puts("Please migrate me, then press return\n");
- (void)getchar();
} else {
test_migration();
}
+ migrate_once();
+
report_prefix_pop();
return report_summary();
}
diff --git a/s390x/migration.c b/s390x/migration.c
index a45296374cd8..fe6ea8369edb 100644
--- a/s390x/migration.c
+++ b/s390x/migration.c
@@ -8,6 +8,7 @@
* Nico Boehr <nrb@linux.ibm.com>
*/
#include <libcflat.h>
+#include <migrate.h>
#include <asm/arch_def.h>
#include <asm/vector.h>
#include <asm/barrier.h>
@@ -178,11 +179,7 @@ int main(void)
mb();
flag_thread_complete = 0;
- /* ask migrate_cmd to migrate (it listens for 'migrate') */
- puts("Please migrate me, then press return\n");
-
- /* wait for migration to finish, we will read a newline */
- (void)getchar();
+ migrate_once();
flag_migration_complete = 1;
--
2.36.1
next prev parent reply other threads:[~2022-12-09 13:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-09 13:48 [kvm-unit-tests PATCH v2 0/4] lib: add function to request migration Nico Boehr
2022-12-09 13:48 ` [kvm-unit-tests PATCH v2 1/4] " Nico Boehr
2022-12-09 15:41 ` Claudio Imbrenda
2022-12-09 13:48 ` [kvm-unit-tests PATCH v2 2/4] powerpc: use migrate_once() in migration tests Nico Boehr
2022-12-09 13:48 ` Nico Boehr [this message]
2022-12-09 15:43 ` [kvm-unit-tests PATCH v2 3/4] s390x: " Claudio Imbrenda
2022-12-09 13:48 ` [kvm-unit-tests PATCH v2 4/4] arm: " Nico Boehr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221209134809.34532-4-nrb@linux.ibm.com \
--to=nrb@linux.ibm.com \
--cc=andrew.jones@linux.dev \
--cc=frankja@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=lvivier@redhat.com \
--cc=pbonzini@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox