From: Eric Farman <farman@linux.ibm.com>
To: Matthew Rosato <mjrosato@linux.ibm.com>,
Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>,
Vasily Gorbik <gor@linux.ibm.com>,
Alexander Gordeev <agordeev@linux.ibm.com>,
Christian Borntraeger <borntraeger@linux.ibm.com>,
Sven Schnelle <svens@linux.ibm.com>,
Vineeth Vijayan <vneethv@linux.ibm.com>,
Peter Oberparleiter <oberpar@linux.ibm.com>,
linux-s390@vger.kernel.org, kvm@vger.kernel.org,
Eric Farman <farman@linux.ibm.com>
Subject: [PATCH v2 09/16] vfio/ccw: populate page_array struct inline
Date: Tue, 20 Dec 2022 18:10:01 +0100 [thread overview]
Message-ID: <20221220171008.1362680-10-farman@linux.ibm.com> (raw)
In-Reply-To: <20221220171008.1362680-1-farman@linux.ibm.com>
There are two possible ways the list of addresses that get passed
to vfio are calculated. One is from a guest IDAL, which would be
an array of (probably) non-contiguous addresses. The other is
built from contiguous pages that follow the starting address
provided by ccw->cda.
page_array_alloc() attempts to simplify things by pre-populating
this array from the starting address, but that's not needed for
a CCW with an IDAL anyway so doesn't need to be in the allocator.
Move it to the caller in the non-IDAL case, since it will be
overwritten when reading the guest IDAL.
Remove the initialization of the pa_page output pointers,
since it won't be explicitly needed for either case.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
---
drivers/s390/cio/vfio_ccw_cp.c | 22 +++++-----------------
1 file changed, 5 insertions(+), 17 deletions(-)
diff --git a/drivers/s390/cio/vfio_ccw_cp.c b/drivers/s390/cio/vfio_ccw_cp.c
index b1436736b7b6..f448aa93007f 100644
--- a/drivers/s390/cio/vfio_ccw_cp.c
+++ b/drivers/s390/cio/vfio_ccw_cp.c
@@ -42,7 +42,6 @@ struct ccwchain {
/*
* page_array_alloc() - alloc memory for page array
* @pa: page_array on which to perform the operation
- * @iova: target guest physical address
* @len: number of pages that should be pinned from @iova
*
* Attempt to allocate memory for page array.
@@ -56,10 +55,8 @@ struct ccwchain {
* -EINVAL if pa->pa_nr is not initially zero, or pa->pa_iova is not NULL
* -ENOMEM if alloc failed
*/
-static int page_array_alloc(struct page_array *pa, u64 iova, unsigned int len)
+static int page_array_alloc(struct page_array *pa, unsigned int len)
{
- int i;
-
if (pa->pa_nr || pa->pa_iova)
return -EINVAL;
@@ -78,13 +75,6 @@ static int page_array_alloc(struct page_array *pa, u64 iova, unsigned int len)
return -ENOMEM;
}
- pa->pa_iova[0] = iova;
- pa->pa_page[0] = NULL;
- for (i = 1; i < pa->pa_nr; i++) {
- pa->pa_iova[i] = pa->pa_iova[i - 1] + PAGE_SIZE;
- pa->pa_page[i] = NULL;
- }
-
return 0;
}
@@ -548,7 +538,7 @@ static int ccwchain_fetch_ccw(struct ccw1 *ccw,
* required for the data transfer, since we only only support
* 4K IDAWs today.
*/
- ret = page_array_alloc(pa, iova, idaw_nr);
+ ret = page_array_alloc(pa, idaw_nr);
if (ret < 0)
goto out_free_idaws;
@@ -565,11 +555,9 @@ static int ccwchain_fetch_ccw(struct ccw1 *ccw,
for (i = 0; i < idaw_nr; i++)
pa->pa_iova[i] = idaws[i];
} else {
- /*
- * No action is required here; the iova addresses in page_array
- * were initialized sequentially in page_array_alloc() beginning
- * with the contents of ccw->cda.
- */
+ pa->pa_iova[0] = iova;
+ for (i = 1; i < pa->pa_nr; i++)
+ pa->pa_iova[i] = pa->pa_iova[i - 1] + PAGE_SIZE;
}
if (ccw_does_data_transfer(ccw)) {
--
2.34.1
next prev parent reply other threads:[~2022-12-20 17:12 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-20 17:09 [PATCH v2 00/16] vfio/ccw: channel program cleanup Eric Farman
2022-12-20 17:09 ` [PATCH v2 01/16] vfio/ccw: cleanup some of the mdev commentary Eric Farman
2022-12-20 17:09 ` [PATCH v2 02/16] vfio/ccw: simplify the cp_get_orb interface Eric Farman
2022-12-20 17:09 ` [PATCH v2 03/16] vfio/ccw: allow non-zero storage keys Eric Farman
2022-12-20 17:09 ` [PATCH v2 04/16] vfio/ccw: move where IDA flag is set in ORB Eric Farman
2022-12-20 17:09 ` [PATCH v2 05/16] vfio/ccw: replace copy_from_iova with vfio_dma_rw Eric Farman
2022-12-20 17:09 ` [PATCH v2 06/16] vfio/ccw: simplify CCW chain fetch routines Eric Farman
2022-12-20 17:09 ` [PATCH v2 07/16] vfio/ccw: remove unnecessary malloc alignment Eric Farman
2022-12-20 17:22 ` Matthew Rosato
2022-12-20 17:10 ` [PATCH v2 08/16] vfio/ccw: pass page count to page_array struct Eric Farman
2022-12-20 17:10 ` Eric Farman [this message]
2022-12-20 17:10 ` [PATCH v2 10/16] vfio/ccw: refactor the idaw counter Eric Farman
2022-12-20 17:10 ` [PATCH v2 11/16] vfio/ccw: read only one Format-1 IDAW Eric Farman
2022-12-20 17:24 ` Matthew Rosato
2022-12-20 17:10 ` [PATCH v2 12/16] vfio/ccw: calculate number of IDAWs regardless of format Eric Farman
2022-12-20 17:10 ` [PATCH v2 13/16] vfio/ccw: allocate/populate the guest idal Eric Farman
2022-12-20 17:45 ` Matthew Rosato
2022-12-20 17:10 ` [PATCH v2 14/16] vfio/ccw: handle a guest Format-1 IDAL Eric Farman
2022-12-20 17:10 ` [PATCH v2 15/16] vfio/ccw: don't group contiguous pages on 2K IDAWs Eric Farman
2022-12-20 17:10 ` [PATCH v2 16/16] vfio/ccw: remove old IDA format restrictions Eric Farman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221220171008.1362680-10-farman@linux.ibm.com \
--to=farman@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mjrosato@linux.ibm.com \
--cc=oberpar@linux.ibm.com \
--cc=pasic@linux.ibm.com \
--cc=svens@linux.ibm.com \
--cc=vneethv@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox