From: Eric Farman <farman@linux.ibm.com>
To: Matthew Rosato <mjrosato@linux.ibm.com>,
Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>,
Vasily Gorbik <gor@linux.ibm.com>,
Alexander Gordeev <agordeev@linux.ibm.com>,
Christian Borntraeger <borntraeger@linux.ibm.com>,
Sven Schnelle <svens@linux.ibm.com>,
Vineeth Vijayan <vneethv@linux.ibm.com>,
Peter Oberparleiter <oberpar@linux.ibm.com>,
linux-s390@vger.kernel.org, kvm@vger.kernel.org,
Eric Farman <farman@linux.ibm.com>
Subject: [PATCH v2 10/16] vfio/ccw: refactor the idaw counter
Date: Tue, 20 Dec 2022 18:10:02 +0100 [thread overview]
Message-ID: <20221220171008.1362680-11-farman@linux.ibm.com> (raw)
In-Reply-To: <20221220171008.1362680-1-farman@linux.ibm.com>
The rules of an IDAW are fairly simple: Each one can move no
more than a defined amount of data, must not cross the
boundary defined by that length, and must be aligned to that
length as well. The first IDAW in a list is special, in that
it does not need to adhere to that alignment, but the other
rules still apply. Thus, by reading the first IDAW in a list,
the number of IDAWs that will comprise a data transfer of a
particular size can be calculated.
Let's factor out the reading of that first IDAW with the
logic that calculates the length of the list, to simplify
the rest of the routine that handles the individual IDAWs.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
---
drivers/s390/cio/vfio_ccw_cp.c | 39 ++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 9 deletions(-)
diff --git a/drivers/s390/cio/vfio_ccw_cp.c b/drivers/s390/cio/vfio_ccw_cp.c
index f448aa93007f..9d74e0b74da7 100644
--- a/drivers/s390/cio/vfio_ccw_cp.c
+++ b/drivers/s390/cio/vfio_ccw_cp.c
@@ -496,23 +496,25 @@ static int ccwchain_fetch_tic(struct ccw1 *ccw,
return -EFAULT;
}
-static int ccwchain_fetch_ccw(struct ccw1 *ccw,
- struct page_array *pa,
- struct channel_program *cp)
+/*
+ * ccw_count_idaws() - Calculate the number of IDAWs needed to transfer
+ * a specified amount of data
+ *
+ * @ccw: The Channel Command Word being translated
+ * @cp: Channel Program being processed
+ */
+static int ccw_count_idaws(struct ccw1 *ccw,
+ struct channel_program *cp)
{
struct vfio_device *vdev =
&container_of(cp, struct vfio_ccw_private, cp)->vdev;
u64 iova;
- unsigned long *idaws;
int ret;
int bytes = 1;
- int idaw_nr, idal_len;
- int i;
if (ccw->count)
bytes = ccw->count;
- /* Calculate size of IDAL */
if (ccw_is_idal(ccw)) {
/* Read first IDAW to see if it's 4K-aligned or not. */
/* All subsequent IDAws will be 4K-aligned. */
@@ -522,7 +524,26 @@ static int ccwchain_fetch_ccw(struct ccw1 *ccw,
} else {
iova = ccw->cda;
}
- idaw_nr = idal_nr_words((void *)iova, bytes);
+
+ return idal_nr_words((void *)iova, bytes);
+}
+
+static int ccwchain_fetch_ccw(struct ccw1 *ccw,
+ struct page_array *pa,
+ struct channel_program *cp)
+{
+ struct vfio_device *vdev =
+ &container_of(cp, struct vfio_ccw_private, cp)->vdev;
+ unsigned long *idaws;
+ int ret;
+ int idaw_nr, idal_len;
+ int i;
+
+ /* Calculate size of IDAL */
+ idaw_nr = ccw_count_idaws(ccw, cp);
+ if (idaw_nr < 0)
+ return idaw_nr;
+
idal_len = idaw_nr * sizeof(*idaws);
/* Allocate an IDAL from host storage */
@@ -555,7 +576,7 @@ static int ccwchain_fetch_ccw(struct ccw1 *ccw,
for (i = 0; i < idaw_nr; i++)
pa->pa_iova[i] = idaws[i];
} else {
- pa->pa_iova[0] = iova;
+ pa->pa_iova[0] = ccw->cda;
for (i = 1; i < pa->pa_nr; i++)
pa->pa_iova[i] = pa->pa_iova[i - 1] + PAGE_SIZE;
}
--
2.34.1
next prev parent reply other threads:[~2022-12-20 17:13 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-20 17:09 [PATCH v2 00/16] vfio/ccw: channel program cleanup Eric Farman
2022-12-20 17:09 ` [PATCH v2 01/16] vfio/ccw: cleanup some of the mdev commentary Eric Farman
2022-12-20 17:09 ` [PATCH v2 02/16] vfio/ccw: simplify the cp_get_orb interface Eric Farman
2022-12-20 17:09 ` [PATCH v2 03/16] vfio/ccw: allow non-zero storage keys Eric Farman
2022-12-20 17:09 ` [PATCH v2 04/16] vfio/ccw: move where IDA flag is set in ORB Eric Farman
2022-12-20 17:09 ` [PATCH v2 05/16] vfio/ccw: replace copy_from_iova with vfio_dma_rw Eric Farman
2022-12-20 17:09 ` [PATCH v2 06/16] vfio/ccw: simplify CCW chain fetch routines Eric Farman
2022-12-20 17:09 ` [PATCH v2 07/16] vfio/ccw: remove unnecessary malloc alignment Eric Farman
2022-12-20 17:22 ` Matthew Rosato
2022-12-20 17:10 ` [PATCH v2 08/16] vfio/ccw: pass page count to page_array struct Eric Farman
2022-12-20 17:10 ` [PATCH v2 09/16] vfio/ccw: populate page_array struct inline Eric Farman
2022-12-20 17:10 ` Eric Farman [this message]
2022-12-20 17:10 ` [PATCH v2 11/16] vfio/ccw: read only one Format-1 IDAW Eric Farman
2022-12-20 17:24 ` Matthew Rosato
2022-12-20 17:10 ` [PATCH v2 12/16] vfio/ccw: calculate number of IDAWs regardless of format Eric Farman
2022-12-20 17:10 ` [PATCH v2 13/16] vfio/ccw: allocate/populate the guest idal Eric Farman
2022-12-20 17:45 ` Matthew Rosato
2022-12-20 17:10 ` [PATCH v2 14/16] vfio/ccw: handle a guest Format-1 IDAL Eric Farman
2022-12-20 17:10 ` [PATCH v2 15/16] vfio/ccw: don't group contiguous pages on 2K IDAWs Eric Farman
2022-12-20 17:10 ` [PATCH v2 16/16] vfio/ccw: remove old IDA format restrictions Eric Farman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221220171008.1362680-11-farman@linux.ibm.com \
--to=farman@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mjrosato@linux.ibm.com \
--cc=oberpar@linux.ibm.com \
--cc=pasic@linux.ibm.com \
--cc=svens@linux.ibm.com \
--cc=vneethv@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox