From: Janosch Frank <frankja@linux.ibm.com>
To: pbonzini@redhat.com
Cc: kvm@vger.kernel.org, frankja@linux.ibm.com, david@redhat.com,
borntraeger@linux.ibm.com, cohuck@redhat.com,
linux-s390@vger.kernel.org, imbrenda@linux.ibm.com,
hca@linux.ibm.com, mihajlov@linux.ibm.com, seiden@linux.ibm.com,
akrowiak@linux.ibm.com
Subject: [GIT PULL 13/22] s390/vfio-ap: use work struct to verify queue reset
Date: Thu, 24 Aug 2023 14:43:22 +0200 [thread overview]
Message-ID: <20230824124522.75408-14-frankja@linux.ibm.com> (raw)
In-Reply-To: <20230824124522.75408-1-frankja@linux.ibm.com>
From: Tony Krowiak <akrowiak@linux.ibm.com>
Instead of waiting to verify that a queue is reset in the
vfio_ap_mdev_reset_queue function, let's use a wait queue to check the
the state of the reset. This way, when resetting all of the queues assigned
to a matrix mdev, we don't have to wait for each queue to be reset before
initiating a reset on the next queue to be reset.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Link: https://lore.kernel.org/r/20230815184333.6554-8-akrowiak@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
---
drivers/s390/crypto/vfio_ap_ops.c | 48 +++++++++++++--------------
drivers/s390/crypto/vfio_ap_private.h | 2 ++
2 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index 43224f7a40ea..3a59f1c5390f 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -35,7 +35,7 @@
static int vfio_ap_mdev_reset_queues(struct ap_queue_table *qtable);
static struct vfio_ap_queue *vfio_ap_find_queue(int apqn);
static const struct vfio_device_ops vfio_ap_matrix_dev_ops;
-static int vfio_ap_mdev_reset_queue(struct vfio_ap_queue *q);
+static void vfio_ap_mdev_reset_queue(struct vfio_ap_queue *q);
/**
* get_update_locks_for_kvm: Acquire the locks required to dynamically update a
@@ -1623,11 +1623,13 @@ static int apq_status_check(int apqn, struct ap_queue_status *status)
#define WAIT_MSG "Waited %dms for reset of queue %02x.%04x (%u, %u, %u)"
-static int apq_reset_check(struct vfio_ap_queue *q)
+static void apq_reset_check(struct work_struct *reset_work)
{
int ret = -EBUSY, elapsed = 0;
struct ap_queue_status status;
+ struct vfio_ap_queue *q;
+ q = container_of(reset_work, struct vfio_ap_queue, reset_work);
memcpy(&status, &q->reset_status, sizeof(status));
while (true) {
msleep(AP_RESET_INTERVAL);
@@ -1635,7 +1637,7 @@ static int apq_reset_check(struct vfio_ap_queue *q)
status = ap_tapq(q->apqn, NULL);
ret = apq_status_check(q->apqn, &status);
if (ret == -EIO)
- return ret;
+ return;
if (ret == -EBUSY) {
pr_notice_ratelimited(WAIT_MSG, elapsed,
AP_QID_CARD(q->apqn),
@@ -1663,34 +1665,32 @@ static int apq_reset_check(struct vfio_ap_queue *q)
break;
}
}
- return ret;
}
-static int vfio_ap_mdev_reset_queue(struct vfio_ap_queue *q)
+static void vfio_ap_mdev_reset_queue(struct vfio_ap_queue *q)
{
struct ap_queue_status status;
- int ret = 0;
if (!q)
- return 0;
+ return;
status = ap_zapq(q->apqn, 0);
memcpy(&q->reset_status, &status, sizeof(status));
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
case AP_RESPONSE_RESET_IN_PROGRESS:
case AP_RESPONSE_BUSY:
- /* Let's verify whether the ZAPQ completed successfully */
- ret = apq_reset_check(q);
+ /*
+ * Let's verify whether the ZAPQ completed successfully on a work queue.
+ */
+ queue_work(system_long_wq, &q->reset_work);
break;
case AP_RESPONSE_DECONFIGURED:
/*
* When an AP adapter is deconfigured, the associated
* queues are reset, so let's set the status response code to 0
- * so the queue may be passed through (i.e., not filtered) and
- * return a value indicating the reset completed successfully.
+ * so the queue may be passed through (i.e., not filtered).
*/
q->reset_status.response_code = 0;
- ret = 0;
vfio_ap_free_aqic_resources(q);
break;
default:
@@ -1698,29 +1698,25 @@ static int vfio_ap_mdev_reset_queue(struct vfio_ap_queue *q)
"PQAP/ZAPQ for %02x.%04x failed with invalid rc=%u\n",
AP_QID_CARD(q->apqn), AP_QID_QUEUE(q->apqn),
status.response_code);
- return -EIO;
}
-
- return ret;
}
static int vfio_ap_mdev_reset_queues(struct ap_queue_table *qtable)
{
- int ret, loop_cursor, rc = 0;
+ int ret = 0, loop_cursor;
struct vfio_ap_queue *q;
+ hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode)
+ vfio_ap_mdev_reset_queue(q);
+
hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode) {
- ret = vfio_ap_mdev_reset_queue(q);
- /*
- * Regardless whether a queue turns out to be busy, or
- * is not operational, we need to continue resetting
- * the remaining queues.
- */
- if (ret)
- rc = ret;
+ flush_work(&q->reset_work);
+
+ if (q->reset_status.response_code)
+ ret = -EIO;
}
- return rc;
+ return ret;
}
static int vfio_ap_mdev_open_device(struct vfio_device *vdev)
@@ -2045,6 +2041,7 @@ int vfio_ap_mdev_probe_queue(struct ap_device *apdev)
q->apqn = to_ap_queue(&apdev->device)->qid;
q->saved_isc = VFIO_AP_ISC_INVALID;
memset(&q->reset_status, 0, sizeof(q->reset_status));
+ INIT_WORK(&q->reset_work, apq_reset_check);
matrix_mdev = get_update_locks_by_apqn(q->apqn);
if (matrix_mdev) {
@@ -2094,6 +2091,7 @@ void vfio_ap_mdev_remove_queue(struct ap_device *apdev)
}
vfio_ap_mdev_reset_queue(q);
+ flush_work(&q->reset_work);
dev_set_drvdata(&apdev->device, NULL);
kfree(q);
release_update_locks_for_mdev(matrix_mdev);
diff --git a/drivers/s390/crypto/vfio_ap_private.h b/drivers/s390/crypto/vfio_ap_private.h
index d6eb3527e056..88aff8b81f2f 100644
--- a/drivers/s390/crypto/vfio_ap_private.h
+++ b/drivers/s390/crypto/vfio_ap_private.h
@@ -134,6 +134,7 @@ struct ap_matrix_mdev {
* @saved_isc: the guest ISC registered with the GIB interface
* @mdev_qnode: allows the vfio_ap_queue struct to be added to a hashtable
* @reset_status: the status from the last reset of the queue
+ * @reset_work: work to wait for queue reset to complete
*/
struct vfio_ap_queue {
struct ap_matrix_mdev *matrix_mdev;
@@ -143,6 +144,7 @@ struct vfio_ap_queue {
unsigned char saved_isc;
struct hlist_node mdev_qnode;
struct ap_queue_status reset_status;
+ struct work_struct reset_work;
};
int vfio_ap_mdev_register(void);
--
2.41.0
next prev parent reply other threads:[~2023-08-24 12:47 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-24 12:43 [GIT PULL 00/22] KVM: s390: Changes for 6.6 Janosch Frank
2023-08-24 12:43 ` [GIT PULL 01/22] KVM: s390: interrupt: Fix single-stepping into interrupt handlers Janosch Frank
2023-08-24 12:43 ` [GIT PULL 02/22] KVM: s390: interrupt: Fix single-stepping into program " Janosch Frank
2023-08-24 12:43 ` [GIT PULL 03/22] KVM: s390: interrupt: Fix single-stepping kernel-emulated instructions Janosch Frank
2023-08-24 12:43 ` [GIT PULL 04/22] KVM: s390: interrupt: Fix single-stepping userspace-emulated instructions Janosch Frank
2023-08-24 12:43 ` [GIT PULL 05/22] KVM: s390: interrupt: Fix single-stepping keyless mode exits Janosch Frank
2023-08-24 12:43 ` [GIT PULL 06/22] KVM: s390: selftests: Add selftest for single-stepping Janosch Frank
2023-08-24 12:43 ` [GIT PULL 07/22] s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ Janosch Frank
2023-08-24 12:43 ` [GIT PULL 08/22] s390/vfio-ap: clean up irq resources if possible Janosch Frank
2023-08-24 12:43 ` [GIT PULL 09/22] s390/vfio-ap: wait for response code 05 to clear on queue reset Janosch Frank
2023-08-24 12:43 ` [GIT PULL 10/22] s390/vfio-ap: allow deconfigured queue to be passed through to a guest Janosch Frank
2023-08-24 12:43 ` [GIT PULL 11/22] s390/vfio-ap: remove upper limit on wait for queue reset to complete Janosch Frank
2023-08-24 12:43 ` [GIT PULL 12/22] s390/vfio-ap: store entire AP queue status word with the queue object Janosch Frank
2023-08-24 12:43 ` Janosch Frank [this message]
2023-08-24 12:43 ` [GIT PULL 14/22] s390/vfio-ap: handle queue state change in progress on reset Janosch Frank
2023-08-24 12:43 ` [GIT PULL 15/22] s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36 Janosch Frank
2023-08-24 12:43 ` [GIT PULL 16/22] s390/uv: export uv_pin_shared for direct usage Janosch Frank
2023-08-24 12:43 ` [GIT PULL 17/22] KVM: s390: export kvm_s390_pv*_is_protected functions Janosch Frank
2023-08-24 12:43 ` [GIT PULL 18/22] s390/vfio-ap: make sure nib is shared Janosch Frank
2023-08-24 12:43 ` [GIT PULL 19/22] KVM: s390: pv: relax WARN_ONCE condition for destroy fast Janosch Frank
2023-08-24 12:43 ` [GIT PULL 20/22] s390/uv: UV feature check utility Janosch Frank
2023-08-24 12:43 ` [GIT PULL 21/22] KVM: s390: Add UV feature negotiation Janosch Frank
2023-08-24 12:43 ` [GIT PULL 22/22] KVM: s390: pv: Allow AP-instructions for pv-guests Janosch Frank
2023-08-25 13:56 ` [GIT PULL 00/22] KVM: s390: Changes for 6.6 Janosch Frank
2023-08-25 15:58 ` Sean Christopherson
2023-08-28 12:34 ` Janosch Frank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230824124522.75408-14-frankja@linux.ibm.com \
--to=frankja@linux.ibm.com \
--cc=akrowiak@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=hca@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mihajlov@linux.ibm.com \
--cc=pbonzini@redhat.com \
--cc=seiden@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox