public inbox for kvm@vger.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	 Kan Liang <kan.liang@linux.intel.com>,
	Dapeng Mi <dapeng1.mi@linux.intel.com>,
	 Jim Mattson <jmattson@google.com>,
	Jinrong Liang <cloudliang@tencent.com>,
	 Aaron Lewis <aaronlewis@google.com>,
	Like Xu <likexu@tencent.com>
Subject: [PATCH v10 10/29] KVM: x86/pmu: Treat "fixed" PMU type in RDPMC as index as a value, not flag
Date: Tue,  9 Jan 2024 15:02:30 -0800	[thread overview]
Message-ID: <20240109230250.424295-11-seanjc@google.com> (raw)
In-Reply-To: <20240109230250.424295-1-seanjc@google.com>

Refactor KVM's handling of ECX for RDPMC to treat the FIXED modifier as an
explicit value, not a flag (minus one wart).  While non-architectural PMUs
do use bit 31 as a flag (for "fast" reads), architectural PMUs use the
upper half of ECX to encode the type.  From the SDM:

  ECX[31:16] specifies type of PMC while ECX[15:0] specifies the index of
  the PMC to be read within that type

Note, that the known supported types are 4000H and 2000H, i.e. look a lot
like flags, doesn't contradict the above statement that ECX[31:16] holds
the type, at least not by any sane reading of the SDM.

Keep the explicitly clearing of the FIXED "flag", as KVM subtly relies on
that behavior to disallow unsupported types while allowing the correct
indices for fixed counters.  This wart will be cleaned up in short order.

Opportunistically grab the per-type bitmask in the if-else blocks to
eliminate the one-off usage of the local "fixed" bool.

Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/kvm/vmx/pmu_intel.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kvm/vmx/pmu_intel.c b/arch/x86/kvm/vmx/pmu_intel.c
index 5a5dfae6055c..c37dd3aa056b 100644
--- a/arch/x86/kvm/vmx/pmu_intel.c
+++ b/arch/x86/kvm/vmx/pmu_intel.c
@@ -28,6 +28,9 @@
  */
 #define INTEL_RDPMC_FIXED	INTEL_PMC_FIXED_RDPMC_BASE
 
+#define INTEL_RDPMC_TYPE_MASK	GENMASK(31, 16)
+#define INTEL_RDPMC_INDEX_MASK	GENMASK(15, 0)
+
 #define MSR_PMC_FULL_WIDTH_BIT      (MSR_IA32_PMC0 - MSR_IA32_PERFCTR0)
 
 static void reprogram_fixed_counters(struct kvm_pmu *pmu, u64 data)
@@ -66,10 +69,11 @@ static struct kvm_pmc *intel_pmc_idx_to_pmc(struct kvm_pmu *pmu, int pmc_idx)
 static struct kvm_pmc *intel_rdpmc_ecx_to_pmc(struct kvm_vcpu *vcpu,
 					    unsigned int idx, u64 *mask)
 {
+	unsigned int type = idx & INTEL_RDPMC_TYPE_MASK;
 	struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
-	bool fixed = idx & INTEL_RDPMC_FIXED;
 	struct kvm_pmc *counters;
 	unsigned int num_counters;
+	u64 bitmask;
 
 	/*
 	 * The encoding of ECX for RDPMC is different for architectural versus
@@ -90,16 +94,20 @@ static struct kvm_pmc *intel_rdpmc_ecx_to_pmc(struct kvm_vcpu *vcpu,
 	 * i.e. let RDPMC fail due to accessing a non-existent counter.
 	 */
 	idx &= ~INTEL_RDPMC_FIXED;
-	if (fixed) {
+	if (type == INTEL_RDPMC_FIXED) {
 		counters = pmu->fixed_counters;
 		num_counters = pmu->nr_arch_fixed_counters;
+		bitmask = pmu->counter_bitmask[KVM_PMC_FIXED];
 	} else {
 		counters = pmu->gp_counters;
 		num_counters = pmu->nr_arch_gp_counters;
+		bitmask = pmu->counter_bitmask[KVM_PMC_GP];
 	}
+
 	if (idx >= num_counters)
 		return NULL;
-	*mask &= pmu->counter_bitmask[fixed ? KVM_PMC_FIXED : KVM_PMC_GP];
+
+	*mask &= bitmask;
 	return &counters[array_index_nospec(idx, num_counters)];
 }
 
-- 
2.43.0.472.g3155946c3a-goog


  parent reply	other threads:[~2024-01-09 23:03 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-09 23:02 [PATCH v10 00/29] KVM: x86/pmu: selftests: Fixes and new tests Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 01/29] KVM: x86/pmu: Always treat Fixed counters as available when supported Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 02/29] KVM: x86/pmu: Allow programming events that match unsupported arch events Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 03/29] KVM: x86/pmu: Remove KVM's enumeration of Intel's architectural encodings Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 04/29] KVM: x86/pmu: Setup fixed counters' eventsel during PMU initialization Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 05/29] KVM: x86/pmu: Get eventsel for fixed counters from perf Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 06/29] KVM: x86/pmu: Don't ignore bits 31:30 for RDPMC index on AMD Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 07/29] KVM: x86/pmu: Prioritize VMX interception over #GP on RDPMC due to bad index Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 08/29] KVM: x86/pmu: Apply "fast" RDPMC only to Intel PMUs Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 09/29] KVM: x86/pmu: Disallow "fast" RDPMC for architectural " Sean Christopherson
2024-01-09 23:02 ` Sean Christopherson [this message]
2024-01-09 23:02 ` [PATCH v10 11/29] KVM: x86/pmu: Explicitly check for RDPMC of unsupported Intel PMC types Sean Christopherson
2024-01-12  3:50   ` Mi, Dapeng
2024-01-09 23:02 ` [PATCH v10 12/29] KVM: selftests: Add vcpu_set_cpuid_property() to set properties Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 13/29] KVM: selftests: Drop the "name" param from KVM_X86_PMU_FEATURE() Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 14/29] KVM: selftests: Extend {kvm,this}_pmu_has() to support fixed counters Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 15/29] KVM: selftests: Add pmu.h and lib/pmu.c for common PMU assets Sean Christopherson
2024-01-10  9:21   ` Andrew Jones
2024-01-10 13:58     ` Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 16/29] KVM: selftests: Test Intel PMU architectural events on gp counters Sean Christopherson
2024-01-12  9:14   ` Mi, Dapeng
2024-01-12 21:37     ` Sean Christopherson
2024-01-15  2:03       ` Mi, Dapeng
2024-01-30 23:27         ` Sean Christopherson
2024-01-31  2:11           ` Mi, Dapeng
2024-01-31 15:31             ` Sean Christopherson
2024-02-01  1:51               ` Mi, Dapeng
2024-01-09 23:02 ` [PATCH v10 17/29] KVM: selftests: Test Intel PMU architectural events on fixed counters Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 18/29] KVM: selftests: Test consistency of CPUID with num of gp counters Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 19/29] KVM: selftests: Test consistency of CPUID with num of fixed counters Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 20/29] KVM: selftests: Add functional test for Intel's fixed PMU counters Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 21/29] KVM: selftests: Expand PMU counters test to verify LLC events Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 22/29] KVM: selftests: Add a helper to query if the PMU module param is enabled Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 23/29] KVM: selftests: Add helpers to read integer module params Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 24/29] KVM: selftests: Query module param to detect FEP in MSR filtering test Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 25/29] KVM: selftests: Move KVM_FEP macro into common library header Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 26/29] KVM: selftests: Test PMC virtualization with forced emulation Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 27/29] KVM: selftests: Add a forced emulation variation of KVM_ASM_SAFE() Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 28/29] KVM: selftests: Add helpers for safe and safe+forced RDMSR, RDPMC, and XGETBV Sean Christopherson
2024-01-09 23:02 ` [PATCH v10 29/29] KVM: selftests: Extend PMU counters test to validate RDPMC after WRMSR Sean Christopherson
2024-01-12  9:17 ` [PATCH v10 00/29] KVM: x86/pmu: selftests: Fixes and new tests Mi, Dapeng
2024-01-31  0:59 ` Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240109230250.424295-11-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=aaronlewis@google.com \
    --cc=cloudliang@tencent.com \
    --cc=dapeng1.mi@linux.intel.com \
    --cc=jmattson@google.com \
    --cc=kan.liang@linux.intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=likexu@tencent.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox