From: Oliver Upton <oliver.upton@linux.dev>
To: kvmarm@lists.linux.dev
Cc: Marc Zyngier <maz@kernel.org>, James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>,
kvm@vger.kernel.org, Jintack Lim <jintack.lim@linaro.org>,
Christoffer Dall <christoffer.dall@arm.com>,
Oliver Upton <oliver.upton@linux.dev>
Subject: [PATCH 01/11] KVM: arm64: nv: Forward FP/ASIMD traps to guest hypervisor
Date: Fri, 31 May 2024 23:13:48 +0000 [thread overview]
Message-ID: <20240531231358.1000039-2-oliver.upton@linux.dev> (raw)
In-Reply-To: <20240531231358.1000039-1-oliver.upton@linux.dev>
From: Jintack Lim <jintack.lim@linaro.org>
Give precedence to the guest hypervisor's trap configuration when
routing an FP/ASIMD trap taken to EL2. Take advantage of the
infrastructure for translating CPTR_EL2 into the VHE (i.e. EL1) format
and base the trap decision solely on the VHE view of the register.
Bury all of this behind a macro keyed off of the CPTR bitfield in
anticipation of supporting other traps (e.g. SVE).
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: account for HCR_EL2.E2H when testing for TFP/FPEN, with
all the hard work actually being done by Chase Conklin]
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ oliver: translate nVHE->VHE format for testing traps; macro for reuse
in other CPTR_EL2.xEN fields ]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
---
arch/arm64/include/asm/kvm_emulate.h | 43 +++++++++++++++++++++++++
arch/arm64/include/asm/kvm_nested.h | 1 -
arch/arm64/kvm/handle_exit.c | 16 ++++++---
arch/arm64/kvm/hyp/include/hyp/switch.h | 3 ++
4 files changed, 58 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index 501e3e019c93..3dd2d80d0cfb 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -11,6 +11,7 @@
#ifndef __ARM64_KVM_EMULATE_H__
#define __ARM64_KVM_EMULATE_H__
+#include <linux/bitfield.h>
#include <linux/kvm_host.h>
#include <asm/debug-monitors.h>
@@ -599,4 +600,46 @@ static __always_inline void kvm_reset_cptr_el2(struct kvm_vcpu *vcpu)
kvm_write_cptr_el2(val);
}
+
+/*
+ * Returns a 'sanitised' view of CPTR_EL2, translating from nVHE to the VHE
+ * format if E2H isn't set.
+ */
+static inline u64 vcpu_sanitised_cptr_el2(const struct kvm_vcpu *vcpu)
+{
+ u64 cptr = vcpu_read_sys_reg(vcpu, CPTR_EL2);
+
+ if (!vcpu_el2_e2h_is_set(vcpu))
+ cptr = translate_cptr_el2_to_cpacr_el1(cptr);
+
+ return cptr;
+}
+
+static inline bool ____cptr_xen_trap_enabled(const struct kvm_vcpu *vcpu,
+ unsigned int xen)
+{
+ switch (xen) {
+ case 0b00:
+ case 0b10:
+ return true;
+ case 0b01:
+ return vcpu_el2_tge_is_set(vcpu) && !vcpu_is_el2(vcpu);
+ case 0b11:
+ default:
+ return false;
+ }
+}
+
+#define __guest_hyp_cptr_xen_trap_enabled(vcpu, xen) \
+ (!vcpu_has_nv(vcpu) ? false : \
+ ____cptr_xen_trap_enabled(vcpu, \
+ SYS_FIELD_GET(CPACR_ELx, xen, \
+ vcpu_sanitised_cptr_el2(vcpu))))
+
+static inline bool guest_hyp_fpsimd_traps_enabled(const struct kvm_vcpu *vcpu)
+{
+ return __guest_hyp_cptr_xen_trap_enabled(vcpu, FPEN);
+}
+
+
#endif /* __ARM64_KVM_EMULATE_H__ */
diff --git a/arch/arm64/include/asm/kvm_nested.h b/arch/arm64/include/asm/kvm_nested.h
index 5e0ab0596246..5d55f76254c3 100644
--- a/arch/arm64/include/asm/kvm_nested.h
+++ b/arch/arm64/include/asm/kvm_nested.h
@@ -75,5 +75,4 @@ static inline bool kvm_auth_eretax(struct kvm_vcpu *vcpu, u64 *elr)
return false;
}
#endif
-
#endif /* __ARM64_KVM_NESTED_H */
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index b037f0a0e27e..59fe9b10a87a 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -94,11 +94,19 @@ static int handle_smc(struct kvm_vcpu *vcpu)
}
/*
- * Guest access to FP/ASIMD registers are routed to this handler only
- * when the system doesn't support FP/ASIMD.
+ * This handles the cases where the system does not support FP/ASIMD or when
+ * we are running nested virtualization and the guest hypervisor is trapping
+ * FP/ASIMD accesses by its guest guest.
+ *
+ * All other handling of guest vs. host FP/ASIMD register state is handled in
+ * fixup_guest_exit().
*/
-static int handle_no_fpsimd(struct kvm_vcpu *vcpu)
+static int kvm_handle_fpasimd(struct kvm_vcpu *vcpu)
{
+ if (guest_hyp_fpsimd_traps_enabled(vcpu))
+ return kvm_inject_nested_sync(vcpu, kvm_vcpu_get_esr(vcpu));
+
+ /* This is the case when the system doesn't support FP/ASIMD. */
kvm_inject_undefined(vcpu);
return 1;
}
@@ -304,7 +312,7 @@ static exit_handle_fn arm_exit_handlers[] = {
[ESR_ELx_EC_BREAKPT_LOW]= kvm_handle_guest_debug,
[ESR_ELx_EC_BKPT32] = kvm_handle_guest_debug,
[ESR_ELx_EC_BRK64] = kvm_handle_guest_debug,
- [ESR_ELx_EC_FP_ASIMD] = handle_no_fpsimd,
+ [ESR_ELx_EC_FP_ASIMD] = kvm_handle_fpasimd,
[ESR_ELx_EC_PAC] = kvm_handle_ptrauth,
};
diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h
index a92566f36022..b302d32f8326 100644
--- a/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ b/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -341,6 +341,9 @@ static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
/* Only handle traps the vCPU can support here: */
switch (esr_ec) {
case ESR_ELx_EC_FP_ASIMD:
+ /* Forward traps to the guest hypervisor as required */
+ if (guest_hyp_fpsimd_traps_enabled(vcpu))
+ return false;
break;
case ESR_ELx_EC_SVE:
if (!sve_guest)
--
2.45.1.288.g0e0cd299f1-goog
next prev parent reply other threads:[~2024-05-31 23:14 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-31 23:13 [PATCH 00/11] KVM: arm64: nv: FPSIMD/SVE support Oliver Upton
2024-05-31 23:13 ` Oliver Upton [this message]
2024-05-31 23:13 ` [PATCH 02/11] KVM: arm64: nv: Forward SVE traps to guest hypervisor Oliver Upton
2024-05-31 23:13 ` [PATCH 03/11] KVM: arm64: nv: Load guest FP state for ZCR_EL2 trap Oliver Upton
2024-06-01 9:47 ` Marc Zyngier
2024-06-01 16:47 ` Oliver Upton
2024-05-31 23:13 ` [PATCH 04/11] KVM: arm64: nv: Load guest hyp's ZCR into EL1 state Oliver Upton
2024-05-31 23:13 ` [PATCH 05/11] KVM: arm64: nv: Handle ZCR_EL2 traps Oliver Upton
2024-05-31 23:13 ` [PATCH 06/11] KVM: arm64: nv: Save guest's ZCR_EL2 when in hyp context Oliver Upton
2024-05-31 23:13 ` [PATCH 07/11] KVM: arm64: nv: Use guest hypervisor's max VL when running nested guest Oliver Upton
2024-05-31 23:13 ` [PATCH 08/11] KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state Oliver Upton
2024-05-31 23:13 ` [PATCH 09/11] KVM: arm64: Spin off helper for programming CPTR traps Oliver Upton
2024-05-31 23:13 ` [PATCH 10/11] KVM: arm64: nv: Honor guest hypervisor's FP/SVE traps in CPTR_EL2 Oliver Upton
2024-06-03 12:36 ` Marc Zyngier
2024-06-03 17:28 ` Oliver Upton
2024-06-04 11:14 ` Marc Zyngier
2024-06-04 17:44 ` Oliver Upton
2024-05-31 23:13 ` [PATCH 11/11] KVM: arm64: Allow the use of SVE+NV Oliver Upton
2024-06-01 10:24 ` [PATCH 00/11] KVM: arm64: nv: FPSIMD/SVE support Marc Zyngier
2024-06-01 16:57 ` Oliver Upton
2024-06-02 14:28 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240531231358.1000039-2-oliver.upton@linux.dev \
--to=oliver.upton@linux.dev \
--cc=christoffer.dall@arm.com \
--cc=james.morse@arm.com \
--cc=jintack.lim@linaro.org \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=maz@kernel.org \
--cc=suzuki.poulose@arm.com \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox