From: Yi Liu <yi.l.liu@intel.com>
To: joro@8bytes.org, jgg@nvidia.com, kevin.tian@intel.com,
baolu.lu@linux.intel.com, will@kernel.org
Cc: alex.williamson@redhat.com, eric.auger@redhat.com,
nicolinc@nvidia.com, kvm@vger.kernel.org,
chao.p.peng@linux.intel.com, yi.l.liu@intel.com,
iommu@lists.linux.dev, zhenzhong.duan@intel.com,
vasant.hegde@amd.com
Subject: [PATCH v3 6/9] iommu/vt-d: Make intel_iommu_set_dev_pasid() to handle domain replacement
Date: Thu, 17 Oct 2024 22:53:59 -0700 [thread overview]
Message-ID: <20241018055402.23277-7-yi.l.liu@intel.com> (raw)
In-Reply-To: <20241018055402.23277-1-yi.l.liu@intel.com>
set_dev_pasid op is going to support domain replacement and keep the old
hardware configuration if it fails. Make the Intel iommu driver be prepared
for it.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
---
drivers/iommu/intel/iommu.c | 97 ++++++++++++++++++++++++-------------
1 file changed, 64 insertions(+), 33 deletions(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 8d92a221d020..302260898c36 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -4250,8 +4250,8 @@ static int intel_iommu_iotlb_sync_map(struct iommu_domain *domain,
return 0;
}
-static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
- struct iommu_domain *domain)
+static void domain_remove_dev_pasid(struct iommu_domain *domain,
+ struct device *dev, ioasid_t pasid)
{
struct device_domain_info *info = dev_iommu_priv_get(dev);
struct dev_pasid_info *curr, *dev_pasid = NULL;
@@ -4259,11 +4259,6 @@ static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
struct dmar_domain *dmar_domain;
unsigned long flags;
- if (domain->type == IOMMU_DOMAIN_IDENTITY) {
- intel_pasid_tear_down_entry(iommu, dev, pasid, 0);
- return;
- }
-
dmar_domain = to_dmar_domain(domain);
spin_lock_irqsave(&dmar_domain->lock, flags);
list_for_each_entry(curr, &dmar_domain->dev_pasids, link_domain) {
@@ -4280,13 +4275,27 @@ static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
domain_detach_iommu(dmar_domain, iommu);
intel_iommu_debugfs_remove_dev_pasid(dev_pasid);
kfree(dev_pasid);
+}
+
+static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
+ struct iommu_domain *domain)
+{
+ struct device_domain_info *info = dev_iommu_priv_get(dev);
+ struct intel_iommu *iommu = info->iommu;
+
intel_pasid_tear_down_entry(iommu, dev, pasid,
INTEL_PASID_TEARDOWN_DRAIN_PRQ);
+
+ /* Identity domain has no meta data for pasid. */
+ if (domain->type == IOMMU_DOMAIN_IDENTITY)
+ return;
+
+ domain_remove_dev_pasid(domain, dev, pasid);
}
-static int intel_iommu_set_dev_pasid(struct iommu_domain *domain,
- struct device *dev, ioasid_t pasid,
- struct iommu_domain *old)
+static struct dev_pasid_info *
+domain_add_dev_pasid(struct iommu_domain *domain,
+ struct device *dev, ioasid_t pasid)
{
struct device_domain_info *info = dev_iommu_priv_get(dev);
struct dmar_domain *dmar_domain = to_dmar_domain(domain);
@@ -4295,22 +4304,13 @@ static int intel_iommu_set_dev_pasid(struct iommu_domain *domain,
unsigned long flags;
int ret;
- if (!pasid_supported(iommu) || dev_is_real_dma_subdevice(dev))
- return -EOPNOTSUPP;
-
- if (domain->dirty_ops)
- return -EINVAL;
-
- if (context_copied(iommu, info->bus, info->devfn))
- return -EBUSY;
-
ret = domain_attach_device_sanitize(domain, dev);
if (ret)
- return ret;
+ return ERR_PTR(ret);
dev_pasid = kzalloc(sizeof(*dev_pasid), GFP_KERNEL);
if (!dev_pasid)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
ret = domain_attach_iommu(dmar_domain, iommu);
if (ret)
@@ -4320,6 +4320,43 @@ static int intel_iommu_set_dev_pasid(struct iommu_domain *domain,
if (ret)
goto out_detach_iommu;
+ dev_pasid->dev = dev;
+ dev_pasid->pasid = pasid;
+ spin_lock_irqsave(&dmar_domain->lock, flags);
+ list_add(&dev_pasid->link_domain, &dmar_domain->dev_pasids);
+ spin_unlock_irqrestore(&dmar_domain->lock, flags);
+
+ return dev_pasid;
+out_detach_iommu:
+ domain_detach_iommu(dmar_domain, iommu);
+out_free:
+ kfree(dev_pasid);
+ return ERR_PTR(ret);
+}
+
+static int intel_iommu_set_dev_pasid(struct iommu_domain *domain,
+ struct device *dev, ioasid_t pasid,
+ struct iommu_domain *old)
+{
+ struct device_domain_info *info = dev_iommu_priv_get(dev);
+ struct dmar_domain *dmar_domain = to_dmar_domain(domain);
+ struct intel_iommu *iommu = info->iommu;
+ struct dev_pasid_info *dev_pasid;
+ int ret;
+
+ if (!pasid_supported(iommu) || dev_is_real_dma_subdevice(dev))
+ return -EOPNOTSUPP;
+
+ if (domain->dirty_ops)
+ return -EINVAL;
+
+ if (context_copied(iommu, info->bus, info->devfn))
+ return -EBUSY;
+
+ dev_pasid = domain_add_dev_pasid(domain, dev, pasid);
+ if (IS_ERR(dev_pasid))
+ return PTR_ERR(dev_pasid);
+
if (dmar_domain->use_first_level)
ret = domain_setup_first_level(iommu, dmar_domain,
dev, pasid);
@@ -4327,24 +4364,18 @@ static int intel_iommu_set_dev_pasid(struct iommu_domain *domain,
ret = intel_pasid_setup_second_level(iommu, dmar_domain,
dev, pasid);
if (ret)
- goto out_unassign_tag;
+ goto out_remove_dev_pasid;
- dev_pasid->dev = dev;
- dev_pasid->pasid = pasid;
- spin_lock_irqsave(&dmar_domain->lock, flags);
- list_add(&dev_pasid->link_domain, &dmar_domain->dev_pasids);
- spin_unlock_irqrestore(&dmar_domain->lock, flags);
+ if (old)
+ domain_remove_dev_pasid(old, dev, pasid);
if (domain->type & __IOMMU_DOMAIN_PAGING)
intel_iommu_debugfs_create_dev_pasid(dev_pasid);
return 0;
-out_unassign_tag:
- cache_tag_unassign_domain(dmar_domain, dev, pasid);
-out_detach_iommu:
- domain_detach_iommu(dmar_domain, iommu);
-out_free:
- kfree(dev_pasid);
+
+out_remove_dev_pasid:
+ domain_remove_dev_pasid(domain, dev, pasid);
return ret;
}
--
2.34.1
next prev parent reply other threads:[~2024-10-18 5:54 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-18 5:53 [PATCH v3 0/9] Make set_dev_pasid op supporting domain replacement Yi Liu
2024-10-18 5:53 ` [PATCH v3 1/9] iommu: Pass old domain to set_dev_pasid op Yi Liu
2024-10-21 5:55 ` Baolu Lu
2024-10-22 5:12 ` Nicolin Chen
2024-10-18 5:53 ` [PATCH v3 2/9] iommu/vt-d: Move intel_drain_pasid_prq() into intel_pasid_tear_down_entry() Yi Liu
2024-10-21 5:58 ` Baolu Lu
2024-10-18 5:53 ` [PATCH v3 3/9] iommu/vt-d: Let intel_pasid_tear_down_entry() return pasid entry Yi Liu
2024-10-21 6:13 ` Baolu Lu
2024-10-21 6:35 ` Yi Liu
2024-10-21 6:59 ` Baolu Lu
2024-10-21 7:24 ` Yi Liu
2024-10-22 9:23 ` Baolu Lu
2024-10-22 9:38 ` Yi Liu
2024-10-22 11:23 ` Baolu Lu
2024-10-22 13:25 ` Yi Liu
2024-10-23 1:10 ` Baolu Lu
2024-10-18 5:53 ` [PATCH v3 4/9] iommu/vt-d: Make pasid setup helpers support modifying present " Yi Liu
2024-10-18 5:53 ` [PATCH v3 5/9] iommu/vt-d: Rename prepare_domain_attach_device() Yi Liu
2024-10-21 6:18 ` Baolu Lu
2024-10-21 6:36 ` Yi Liu
2024-10-18 5:53 ` Yi Liu [this message]
2024-10-18 5:54 ` [PATCH v3 7/9] iommu/vt-d: Add set_dev_pasid callback for nested domain Yi Liu
2024-10-18 5:54 ` [PATCH v3 8/9] iommu/arm-smmu-v3: Make set_dev_pasid() op support replace Yi Liu
2024-10-22 5:25 ` Nicolin Chen
2024-10-22 6:07 ` Yi Liu
2024-10-18 5:54 ` [PATCH v3 9/9] iommu: Make set_dev_pasid op support domain replacement Yi Liu
2024-10-21 6:27 ` Baolu Lu
2024-10-21 6:40 ` Yi Liu
2024-10-21 10:50 ` Vasant Hegde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241018055402.23277-7-yi.l.liu@intel.com \
--to=yi.l.liu@intel.com \
--cc=alex.williamson@redhat.com \
--cc=baolu.lu@linux.intel.com \
--cc=chao.p.peng@linux.intel.com \
--cc=eric.auger@redhat.com \
--cc=iommu@lists.linux.dev \
--cc=jgg@nvidia.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=kvm@vger.kernel.org \
--cc=nicolinc@nvidia.com \
--cc=vasant.hegde@amd.com \
--cc=will@kernel.org \
--cc=zhenzhong.duan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox