From: Joey Gouly <joey.gouly@arm.com>
To: Marc Zyngier <maz@kernel.org>
Cc: kvmarm@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
kvm@vger.kernel.org, Suzuki K Poulose <suzuki.poulose@arm.com>,
Oliver Upton <oliver.upton@linux.dev>,
Zenghui Yu <yuzenghui@huawei.com>,
Alexandru Elisei <alexandru.elisei@arm.com>,
Mark Brown <broonie@kernel.org>
Subject: Re: [PATCH v5 08/37] KVM: arm64: Correctly access TCR2_EL1, PIR_EL1, PIRE0_EL1 with VHE
Date: Thu, 24 Oct 2024 11:03:36 +0100 [thread overview]
Message-ID: <20241024100336.GA1382116@e124191.cambridge.arm.com> (raw)
In-Reply-To: <20241023145345.1613824-9-maz@kernel.org>
On Wed, Oct 23, 2024 at 03:53:16PM +0100, Marc Zyngier wrote:
> For code that accesses any of the guest registers for emulation
> purposes, it is crucial to know where the most up-to-date data is.
>
> While this is pretty clear for nVHE (memory is the sole repository),
> things are a lot muddier for VHE, as depending on the SYSREGS_ON_CPU
> flag, registers can either be loaded on the HW or be in memory.
>
> Even worse with NV, where the loaded state is by definition partial.
>
> For these reasons, KVM offers the vcpu_read_sys_reg() and
> vcpu_write_sys_reg() primitives that always do the right thing.
> However, these primitive must know what register to access, and
> this is the role of the __vcpu_read_sys_reg_from_cpu() and
> __vcpu_write_sys_reg_to_cpu() helpers.
>
> As it turns out, TCR2_EL1, PIR_EL1, PIRE0_EL1 and not described
> in the latter helpers, meaning that the AT code cannot use them
> to emulate S1PIE.
>
> Add the three registers to the (long) list.
>
> Fixes: 86f9de9db178 ("KVM: arm64: Save/restore PIE registers")
> Signed-off-by: Marc Zyngier <maz@kernel.org>
> Cc: Joey Gouly <joey.gouly@arm.com>
> ---
> arch/arm64/include/asm/kvm_host.h | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index 329619c6fa961..1adf68971bb17 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -1030,6 +1030,9 @@ static inline bool __vcpu_read_sys_reg_from_cpu(int reg, u64 *val)
> case TTBR0_EL1: *val = read_sysreg_s(SYS_TTBR0_EL12); break;
> case TTBR1_EL1: *val = read_sysreg_s(SYS_TTBR1_EL12); break;
> case TCR_EL1: *val = read_sysreg_s(SYS_TCR_EL12); break;
> + case TCR2_EL1: *val = read_sysreg_s(SYS_TCR2_EL12); break;
> + case PIR_EL1: *val = read_sysreg_s(SYS_PIR_EL12); break;
> + case PIRE0_EL1: *val = read_sysreg_s(SYS_PIRE0_EL12); break;
> case ESR_EL1: *val = read_sysreg_s(SYS_ESR_EL12); break;
> case AFSR0_EL1: *val = read_sysreg_s(SYS_AFSR0_EL12); break;
> case AFSR1_EL1: *val = read_sysreg_s(SYS_AFSR1_EL12); break;
> @@ -1076,6 +1079,9 @@ static inline bool __vcpu_write_sys_reg_to_cpu(u64 val, int reg)
> case TTBR0_EL1: write_sysreg_s(val, SYS_TTBR0_EL12); break;
> case TTBR1_EL1: write_sysreg_s(val, SYS_TTBR1_EL12); break;
> case TCR_EL1: write_sysreg_s(val, SYS_TCR_EL12); break;
> + case TCR2_EL1: write_sysreg_s(val, SYS_TCR2_EL12); break;
> + case PIR_EL1: write_sysreg_s(val, SYS_PIR_EL12); break;
> + case PIRE0_EL1: write_sysreg_s(val, SYS_PIRE0_EL12); break;
> case ESR_EL1: write_sysreg_s(val, SYS_ESR_EL12); break;
> case AFSR0_EL1: write_sysreg_s(val, SYS_AFSR0_EL12); break;
> case AFSR1_EL1: write_sysreg_s(val, SYS_AFSR1_EL12); break;
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
next prev parent reply other threads:[~2024-10-24 10:03 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-23 14:53 [PATCH v5 00/37] KVM: arm64: Add EL2 support to FEAT_S1PIE/S1POE Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 01/37] arm64: Drop SKL0/SKL1 from TCR2_EL2 Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 02/37] arm64: Remove VNCR definition for PIRE0_EL2 Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 03/37] arm64: Add encoding " Marc Zyngier
2024-10-23 16:11 ` Mark Brown
2024-10-23 14:53 ` [PATCH v5 04/37] KVM: arm64: Drop useless struct s2_mmu in __kvm_at_s1e2() Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 05/37] KVM: arm64: nv: Add missing EL2->EL1 mappings in get_el2_to_el1_mapping() Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 06/37] KVM: arm64: nv: Handle CNTHCTL_EL2 specially Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 07/37] KVM: arm64: nv: Save/Restore vEL2 sysregs Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 08/37] KVM: arm64: Correctly access TCR2_EL1, PIR_EL1, PIRE0_EL1 with VHE Marc Zyngier
2024-10-24 10:03 ` Joey Gouly [this message]
2024-10-23 14:53 ` [PATCH v5 09/37] KVM: arm64: Extend masking facility to arbitrary registers Marc Zyngier
2024-10-24 10:38 ` Joey Gouly
2024-10-23 14:53 ` [PATCH v5 10/37] arm64: Define ID_AA64MMFR1_EL1.HAFDBS advertising FEAT_HAFT Marc Zyngier
2024-10-23 16:09 ` Mark Brown
2024-10-23 14:53 ` [PATCH v5 11/37] KVM: arm64: Add TCR2_EL2 to the sysreg arrays Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 12/37] KVM: arm64: Sanitise TCR2_EL2 Marc Zyngier
2024-10-24 10:21 ` Joey Gouly
2024-10-23 14:53 ` [PATCH v5 13/37] KVM: arm64: Add save/restore for TCR2_EL2 Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 14/37] KVM: arm64: Add PIR{,E0}_EL2 to the sysreg arrays Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 15/37] KVM: arm64: Add save/restore for PIR{,E0}_EL2 Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 16/37] KVM: arm64: Handle PIR{,E0}_EL2 traps Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 17/37] KVM: arm64: Sanitise ID_AA64MMFR3_EL1 Marc Zyngier
2024-10-24 12:32 ` Mark Brown
2024-10-24 12:45 ` Joey Gouly
2024-10-24 12:55 ` Mark Brown
2024-10-23 14:53 ` [PATCH v5 18/37] KVM: arm64: Add AT fast-path support for S1PIE Marc Zyngier
2024-10-24 14:49 ` Joey Gouly
2024-10-23 14:53 ` [PATCH v5 19/37] KVM: arm64: Split S1 permission evaluation into direct and hierarchical parts Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 20/37] KVM: arm64: Disable hierarchical permissions when S1PIE is enabled Marc Zyngier
2024-10-24 14:02 ` Joey Gouly
2024-10-23 14:53 ` [PATCH v5 21/37] KVM: arm64: Implement AT S1PIE support Marc Zyngier
2024-10-24 13:59 ` Joey Gouly
2024-10-24 14:21 ` Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 22/37] KVM: arm64: Add a composite EL2 visibility helper Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 23/37] KVM: arm64: Define helper for EL2 registers with custom visibility Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 24/37] KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 25/37] KVM: arm64: Hide S1PIE registers " Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 26/37] KVM: arm64: Rely on visibility to let PIR*_ELx/TCR2_ELx UNDEF Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 27/37] arm64: Add encoding for POR_EL2 Marc Zyngier
2024-10-23 16:13 ` Mark Brown
2024-10-23 16:28 ` Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 28/37] KVM: arm64: Drop bogus CPTR_EL2.E0POE trap routing Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 29/37] KVM: arm64: Subject S1PIE/S1POE registers to HCR_EL2.{TVM,TRVM} Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 30/37] KVM: arm64: Add kvm_has_s1poe() helper Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 31/37] KVM: arm64: Add basic support for POR_EL2 Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 32/37] KVM: arm64: Add save/restore " Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 33/37] KVM: arm64: Add POE save/restore for AT emulation fast-path Marc Zyngier
2024-10-24 15:26 ` Joey Gouly
2024-10-23 14:53 ` [PATCH v5 34/37] KVM: arm64: Disable hierarchical permissions when POE is enabled Marc Zyngier
2024-10-24 15:36 ` Joey Gouly
2024-10-23 14:53 ` [PATCH v5 35/37] KVM: arm64: Make PAN conditions part of the S1 walk context Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 36/37] KVM: arm64: Handle stage-1 permission overlays Marc Zyngier
2024-10-23 14:53 ` [PATCH v5 37/37] KVM: arm64: Handle WXN attribute Marc Zyngier
2024-10-31 3:04 ` [PATCH v5 00/37] KVM: arm64: Add EL2 support to FEAT_S1PIE/S1POE Oliver Upton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241024100336.GA1382116@e124191.cambridge.arm.com \
--to=joey.gouly@arm.com \
--cc=alexandru.elisei@arm.com \
--cc=broonie@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=maz@kernel.org \
--cc=oliver.upton@linux.dev \
--cc=suzuki.poulose@arm.com \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox