From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Jim Mattson <jmattson@google.com>
Subject: [PATCH 1/5] KVM: x86: Cache CPUID.0xD XSTATE offsets+sizes during module init
Date: Tue, 10 Dec 2024 17:32:58 -0800 [thread overview]
Message-ID: <20241211013302.1347853-2-seanjc@google.com> (raw)
In-Reply-To: <20241211013302.1347853-1-seanjc@google.com>
Snapshot the output of CPUID.0xD.[1..n] during kvm.ko initiliaization to
avoid the overead of CPUID during runtime. The offset, size, and metadata
for CPUID.0xD.[1..n] sub-leaves does not depend on XCR0 or XSS values, i.e.
is constant for a given CPU, and thus can be cached during module load.
On Intel's Emerald Rapids, CPUID is *wildly* expensive, to the point where
recomputing XSAVE offsets and sizes results in a 4x increase in latency of
nested VM-Enter and VM-Exit (nested transitions can trigger
xstate_required_size() multiple times per transition), relative to using
cached values. The issue is easily visible by running `perf top` while
triggering nested transitions: kvm_update_cpuid_runtime() shows up at a
whopping 50%.
As measured via RDTSC from L2 (using KVM-Unit-Test's CPUID VM-Exit test
and a slightly modified L1 KVM to handle CPUID in the fastpath), a nested
roundtrip to emulate CPUID on Skylake (SKX), Icelake (ICX), and Emerald
Rapids (EMR) takes:
SKX 11650
ICX 22350
EMR 28850
Using cached values, the latency drops to:
SKX 6850
ICX 9000
EMR 7900
The underlying issue is that CPUID itself is slow on ICX, and comically
slow on EMR. The problem is exacerbated on CPUs which support XSAVES
and/or XSAVEC, as KVM invokes xstate_required_size() twice on each
runtime CPUID update, and because there are more supported XSAVE features
(CPUID for supported XSAVE feature sub-leafs is significantly slower).
SKX:
CPUID.0xD.2 = 348 cycles
CPUID.0xD.3 = 400 cycles
CPUID.0xD.4 = 276 cycles
CPUID.0xD.5 = 236 cycles
<other sub-leaves are similar>
EMR:
CPUID.0xD.2 = 1138 cycles
CPUID.0xD.3 = 1362 cycles
CPUID.0xD.4 = 1068 cycles
CPUID.0xD.5 = 910 cycles
CPUID.0xD.6 = 914 cycles
CPUID.0xD.7 = 1350 cycles
CPUID.0xD.8 = 734 cycles
CPUID.0xD.9 = 766 cycles
CPUID.0xD.10 = 732 cycles
CPUID.0xD.11 = 718 cycles
CPUID.0xD.12 = 734 cycles
CPUID.0xD.13 = 1700 cycles
CPUID.0xD.14 = 1126 cycles
CPUID.0xD.15 = 898 cycles
CPUID.0xD.16 = 716 cycles
CPUID.0xD.17 = 748 cycles
CPUID.0xD.18 = 776 cycles
Note, updating runtime CPUID information multiple times per nested
transition is itself a flaw, especially since CPUID is a mandotory
intercept on both Intel and AMD. E.g. KVM doesn't need to ensure emulated
CPUID state is up-to-date while running L2. That flaw will be fixed in a
future patch, as deferring runtime CPUID updates is more subtle than it
appears at first glance, the benefits aren't super critical to have once
the XSAVE issue is resolved, and caching CPUID output is desirable even if
KVM's updates are deferred.
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/cpuid.c | 31 ++++++++++++++++++++++++++-----
arch/x86/kvm/cpuid.h | 1 +
arch/x86/kvm/x86.c | 2 ++
3 files changed, 29 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 572dfa7e206e..edef30359c19 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -36,6 +36,26 @@
u32 kvm_cpu_caps[NR_KVM_CPU_CAPS] __read_mostly;
EXPORT_SYMBOL_GPL(kvm_cpu_caps);
+struct cpuid_xstate_sizes {
+ u32 eax;
+ u32 ebx;
+ u32 ecx;
+};
+
+static struct cpuid_xstate_sizes xstate_sizes[XFEATURE_MAX] __ro_after_init;
+
+void __init kvm_init_xstate_sizes(void)
+{
+ u32 ign;
+ int i;
+
+ for (i = XFEATURE_YMM; i < ARRAY_SIZE(xstate_sizes); i++) {
+ struct cpuid_xstate_sizes *xs = &xstate_sizes[i];
+
+ cpuid_count(0xD, i, &xs->eax, &xs->ebx, &xs->ecx, &ign);
+ }
+}
+
u32 xstate_required_size(u64 xstate_bv, bool compacted)
{
int feature_bit = 0;
@@ -44,14 +64,15 @@ u32 xstate_required_size(u64 xstate_bv, bool compacted)
xstate_bv &= XFEATURE_MASK_EXTEND;
while (xstate_bv) {
if (xstate_bv & 0x1) {
- u32 eax, ebx, ecx, edx, offset;
- cpuid_count(0xD, feature_bit, &eax, &ebx, &ecx, &edx);
+ struct cpuid_xstate_sizes *xs = &xstate_sizes[feature_bit];
+ u32 offset;
+
/* ECX[1]: 64B alignment in compacted form */
if (compacted)
- offset = (ecx & 0x2) ? ALIGN(ret, 64) : ret;
+ offset = (xs->ecx & 0x2) ? ALIGN(ret, 64) : ret;
else
- offset = ebx;
- ret = max(ret, offset + eax);
+ offset = xs->ebx;
+ ret = max(ret, offset + xs->eax);
}
xstate_bv >>= 1;
diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h
index 3d69a0ef8268..67d80aa72d50 100644
--- a/arch/x86/kvm/cpuid.h
+++ b/arch/x86/kvm/cpuid.h
@@ -31,6 +31,7 @@ int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu,
bool kvm_cpuid(struct kvm_vcpu *vcpu, u32 *eax, u32 *ebx,
u32 *ecx, u32 *edx, bool exact_only);
+void __init kvm_init_xstate_sizes(void);
u32 xstate_required_size(u64 xstate_bv, bool compacted);
int cpuid_query_maxphyaddr(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index cc4563fb07d1..320764e5f798 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -13982,6 +13982,8 @@ EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_rmp_fault);
static int __init kvm_x86_init(void)
{
+ kvm_init_xstate_sizes();
+
kvm_mmu_x86_module_init();
mitigate_smt_rsb &= boot_cpu_has_bug(X86_BUG_SMT_RSB) && cpu_smt_possible();
return 0;
--
2.47.0.338.g60cca15819-goog
next prev parent reply other threads:[~2024-12-11 1:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-11 1:32 [PATCH 0/5] KVM: x86: Address xstate_required_size() perf regression Sean Christopherson
2024-12-11 1:32 ` Sean Christopherson [this message]
2024-12-11 1:32 ` [PATCH 2/5] KVM: x86: Use for-loop to iterate over XSTATE size entries Sean Christopherson
2024-12-11 1:33 ` [PATCH 3/5] KVM: x86: Apply TSX_CTRL_CPUID_CLEAR if and only if the vCPU has RTM or HLE Sean Christopherson
2024-12-13 14:39 ` Jim Mattson
2024-12-11 1:33 ` [PATCH 4/5] KVM: x86: Query X86_FEATURE_MWAIT iff userspace owns the CPUID feature bit Sean Christopherson
2024-12-11 1:33 ` [PATCH 5/5] KVM: x86: Defer runtime updates of dynamic CPUID bits until CPUID emulation Sean Christopherson
2025-11-28 11:32 ` Igor Mammedov
2025-12-01 15:55 ` Sean Christopherson
2025-12-01 19:36 ` Sean Christopherson
2024-12-11 16:42 ` [PATCH 0/5] KVM: x86: Address xstate_required_size() perf regression Sean Christopherson
2024-12-13 18:58 ` Paolo Bonzini
2024-12-16 20:04 ` Jim Mattson
2024-12-16 23:16 ` Sean Christopherson
2025-02-15 0:50 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241211013302.1347853-2-seanjc@google.com \
--to=seanjc@google.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox