From: Yi Liu <yi.l.liu@intel.com>
To: alex.williamson@redhat.com, kevin.tian@intel.com
Cc: jgg@nvidia.com, eric.auger@redhat.com, nicolinc@nvidia.com,
kvm@vger.kernel.org, yi.l.liu@intel.com,
chao.p.peng@linux.intel.com, zhenzhong.duan@intel.com,
willy@infradead.org, zhangfei.gao@linaro.org,
vasant.hegde@amd.com
Subject: [PATCH v8 3/5] vfio: VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT support pasid
Date: Thu, 13 Mar 2025 05:47:51 -0700 [thread overview]
Message-ID: <20250313124753.185090-4-yi.l.liu@intel.com> (raw)
In-Reply-To: <20250313124753.185090-1-yi.l.liu@intel.com>
This extends the VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT ioctls to attach/detach
a given pasid of a vfio device to/from an IOAS/HWPT.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
---
drivers/vfio/device_cdev.c | 60 +++++++++++++++++++++++++++++++++-----
include/uapi/linux/vfio.h | 29 +++++++++++-------
2 files changed, 71 insertions(+), 18 deletions(-)
diff --git a/drivers/vfio/device_cdev.c b/drivers/vfio/device_cdev.c
index bb1817bd4ff3..6d436bee8207 100644
--- a/drivers/vfio/device_cdev.c
+++ b/drivers/vfio/device_cdev.c
@@ -162,9 +162,9 @@ void vfio_df_unbind_iommufd(struct vfio_device_file *df)
int vfio_df_ioctl_attach_pt(struct vfio_device_file *df,
struct vfio_device_attach_iommufd_pt __user *arg)
{
- struct vfio_device *device = df->device;
struct vfio_device_attach_iommufd_pt attach;
- unsigned long minsz;
+ struct vfio_device *device = df->device;
+ unsigned long minsz, xend = 0;
int ret;
minsz = offsetofend(struct vfio_device_attach_iommufd_pt, pt_id);
@@ -172,11 +172,34 @@ int vfio_df_ioctl_attach_pt(struct vfio_device_file *df,
if (copy_from_user(&attach, arg, minsz))
return -EFAULT;
- if (attach.argsz < minsz || attach.flags)
+ if (attach.argsz < minsz)
return -EINVAL;
+ if (attach.flags & (~VFIO_DEVICE_ATTACH_PASID))
+ return -EINVAL;
+
+ if (attach.flags & VFIO_DEVICE_ATTACH_PASID) {
+ if (!device->ops->pasid_attach_ioas)
+ return -EOPNOTSUPP;
+ xend = offsetofend(struct vfio_device_attach_iommufd_pt, pasid);
+ }
+
+ if (xend) {
+ if (attach.argsz < xend)
+ return -EINVAL;
+
+ if (copy_from_user((void *)&attach + minsz,
+ (void __user *)arg + minsz, xend - minsz))
+ return -EFAULT;
+ }
+
mutex_lock(&device->dev_set->lock);
- ret = device->ops->attach_ioas(device, &attach.pt_id);
+ if (attach.flags & VFIO_DEVICE_ATTACH_PASID)
+ ret = device->ops->pasid_attach_ioas(device,
+ attach.pasid,
+ &attach.pt_id);
+ else
+ ret = device->ops->attach_ioas(device, &attach.pt_id);
if (ret)
goto out_unlock;
@@ -198,20 +221,41 @@ int vfio_df_ioctl_attach_pt(struct vfio_device_file *df,
int vfio_df_ioctl_detach_pt(struct vfio_device_file *df,
struct vfio_device_detach_iommufd_pt __user *arg)
{
- struct vfio_device *device = df->device;
struct vfio_device_detach_iommufd_pt detach;
- unsigned long minsz;
+ struct vfio_device *device = df->device;
+ unsigned long minsz, xend = 0;
minsz = offsetofend(struct vfio_device_detach_iommufd_pt, flags);
if (copy_from_user(&detach, arg, minsz))
return -EFAULT;
- if (detach.argsz < minsz || detach.flags)
+ if (detach.argsz < minsz)
return -EINVAL;
+ if (detach.flags & (~VFIO_DEVICE_DETACH_PASID))
+ return -EINVAL;
+
+ if (detach.flags & VFIO_DEVICE_DETACH_PASID) {
+ if (!device->ops->pasid_detach_ioas)
+ return -EOPNOTSUPP;
+ xend = offsetofend(struct vfio_device_detach_iommufd_pt, pasid);
+ }
+
+ if (xend) {
+ if (detach.argsz < xend)
+ return -EINVAL;
+
+ if (copy_from_user((void *)&detach + minsz,
+ (void __user *)arg + minsz, xend - minsz))
+ return -EFAULT;
+ }
+
mutex_lock(&device->dev_set->lock);
- device->ops->detach_ioas(device);
+ if (detach.flags & VFIO_DEVICE_DETACH_PASID)
+ device->ops->pasid_detach_ioas(device, detach.pasid);
+ else
+ device->ops->detach_ioas(device);
mutex_unlock(&device->dev_set->lock);
return 0;
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index c8dbf8219c4f..6899da70b929 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -931,29 +931,34 @@ struct vfio_device_bind_iommufd {
* VFIO_DEVICE_ATTACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 19,
* struct vfio_device_attach_iommufd_pt)
* @argsz: User filled size of this data.
- * @flags: Must be 0.
+ * @flags: Flags for attach.
* @pt_id: Input the target id which can represent an ioas or a hwpt
* allocated via iommufd subsystem.
* Output the input ioas id or the attached hwpt id which could
* be the specified hwpt itself or a hwpt automatically created
* for the specified ioas by kernel during the attachment.
+ * @pasid: The pasid to be attached, only meaningful when
+ * VFIO_DEVICE_ATTACH_PASID is set in @flags
*
* Associate the device with an address space within the bound iommufd.
* Undo by VFIO_DEVICE_DETACH_IOMMUFD_PT or device fd close. This is only
* allowed on cdev fds.
*
- * If a vfio device is currently attached to a valid hw_pagetable, without doing
- * a VFIO_DEVICE_DETACH_IOMMUFD_PT, a second VFIO_DEVICE_ATTACH_IOMMUFD_PT ioctl
- * passing in another hw_pagetable (hwpt) id is allowed. This action, also known
- * as a hw_pagetable replacement, will replace the device's currently attached
- * hw_pagetable with a new hw_pagetable corresponding to the given pt_id.
+ * If a vfio device or a pasid of this device is currently attached to a valid
+ * hw_pagetable (hwpt), without doing a VFIO_DEVICE_DETACH_IOMMUFD_PT, a second
+ * VFIO_DEVICE_ATTACH_IOMMUFD_PT ioctl passing in another hwpt id is allowed.
+ * This action, also known as a hw_pagetable replacement, will replace the
+ * currently attached hwpt of the device or the pasid of this device with a new
+ * hwpt corresponding to the given pt_id.
*
* Return: 0 on success, -errno on failure.
*/
struct vfio_device_attach_iommufd_pt {
__u32 argsz;
__u32 flags;
+#define VFIO_DEVICE_ATTACH_PASID (1 << 0)
__u32 pt_id;
+ __u32 pasid;
};
#define VFIO_DEVICE_ATTACH_IOMMUFD_PT _IO(VFIO_TYPE, VFIO_BASE + 19)
@@ -962,17 +967,21 @@ struct vfio_device_attach_iommufd_pt {
* VFIO_DEVICE_DETACH_IOMMUFD_PT - _IOW(VFIO_TYPE, VFIO_BASE + 20,
* struct vfio_device_detach_iommufd_pt)
* @argsz: User filled size of this data.
- * @flags: Must be 0.
+ * @flags: Flags for detach.
+ * @pasid: The pasid to be detached, only meaningful when
+ * VFIO_DEVICE_DETACH_PASID is set in @flags
*
- * Remove the association of the device and its current associated address
- * space. After it, the device should be in a blocking DMA state. This is only
- * allowed on cdev fds.
+ * Remove the association of the device or a pasid of the device and its current
+ * associated address space. After it, the device or the pasid should be in a
+ * blocking DMA state. This is only allowed on cdev fds.
*
* Return: 0 on success, -errno on failure.
*/
struct vfio_device_detach_iommufd_pt {
__u32 argsz;
__u32 flags;
+#define VFIO_DEVICE_DETACH_PASID (1 << 0)
+ __u32 pasid;
};
#define VFIO_DEVICE_DETACH_IOMMUFD_PT _IO(VFIO_TYPE, VFIO_BASE + 20)
--
2.34.1
next prev parent reply other threads:[~2025-03-13 12:47 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-13 12:47 [PATCH v8 0/5] vfio-pci support pasid attach/detach Yi Liu
2025-03-13 12:47 ` [PATCH v8 1/5] ida: Add ida_find_first_range() Yi Liu
2025-03-13 12:47 ` [PATCH v8 2/5] vfio-iommufd: Support pasid [at|de]tach for physical VFIO devices Yi Liu
2025-03-13 12:47 ` Yi Liu [this message]
2025-03-19 17:41 ` [PATCH v8 3/5] vfio: VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT support pasid Nicolin Chen
2025-03-20 12:37 ` Yi Liu
2025-03-13 12:47 ` [PATCH v8 4/5] iommufd: Extend IOMMU_GET_HW_INFO to report PASID capability Yi Liu
2025-03-17 7:18 ` Yi Liu
2025-03-19 17:58 ` Nicolin Chen
2025-03-20 12:48 ` Yi Liu
2025-03-20 16:47 ` Nicolin Chen
2025-03-20 18:57 ` Jason Gunthorpe
2025-03-20 20:02 ` Nicolin Chen
2025-03-20 23:40 ` Jason Gunthorpe
2025-03-20 23:48 ` Nicolin Chen
2025-03-21 4:27 ` Nicolin Chen
2025-03-21 17:37 ` Yi Liu
2025-03-21 18:29 ` Nicolin Chen
2025-03-21 18:42 ` Jason Gunthorpe
2025-03-21 19:00 ` Nicolin Chen
2025-03-13 12:47 ` [PATCH v8 5/5] iommufd/selftest: Add coverage for reporting max_pasid_log2 via IOMMU_HW_INFO Yi Liu
2025-03-19 18:12 ` Nicolin Chen
2025-03-14 14:48 ` [PATCH v8 0/5] vfio-pci support pasid attach/detach Alex Williamson
2025-03-17 7:25 ` Yi Liu
2025-03-17 19:28 ` Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250313124753.185090-4-yi.l.liu@intel.com \
--to=yi.l.liu@intel.com \
--cc=alex.williamson@redhat.com \
--cc=chao.p.peng@linux.intel.com \
--cc=eric.auger@redhat.com \
--cc=jgg@nvidia.com \
--cc=kevin.tian@intel.com \
--cc=kvm@vger.kernel.org \
--cc=nicolinc@nvidia.com \
--cc=vasant.hegde@amd.com \
--cc=willy@infradead.org \
--cc=zhangfei.gao@linaro.org \
--cc=zhenzhong.duan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox