[PATCH v8 0/6] bugfix some driver issues

[PATCH v8 0/6] bugfix some driver issues

[Longfang Liu]

As the test scenarios for the live migration function become
more and more extensive. Some previously undiscovered driver
issues were found.
Update and fix through this patchset.

Change v7 -> v8
	Handle the return value of sub-functions.

Change v6 -> v7
	Update function return values.

Change v5 -> v6
	Remove redundant vf_qm_state status checks.

Change v4 -> v5
	Update version matching strategy

Change v3 -> v4
	Modify version matching scheme

Change v2 -> v3
	Modify the magic digital field segment

Change v1 -> v2
	Add fixes line for patch comment

Longfang Liu (6):
  hisi_acc_vfio_pci: fix XQE dma address error
  hisi_acc_vfio_pci: add eq and aeq interruption restore
  hisi_acc_vfio_pci: bugfix cache write-back issue
  hisi_acc_vfio_pci: bugfix the problem of uninstalling driver
  hisi_acc_vfio_pci: bugfix live migration function without VF device
    driver
  hisi_acc_vfio_pci: update function return values.

 .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 121 +++++++++++++-----
 .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h    |  14 +-
 2 files changed, 101 insertions(+), 34 deletions(-)

-- 
2.24.0

[PATCH v8 1/6] hisi_acc_vfio_pci: fix XQE dma address error

[Longfang Liu]

The dma addresses of EQE and AEQE are wrong after migration and
results in guest kernel-mode encryption services  failure.
Comparing the definition of hardware registers, we found that
there was an error when the data read from the register was
combined into an address. Therefore, the address combination
sequence needs to be corrected.

Even after fixing the above problem, we still have an issue
where the Guest from an old kernel can get migrated to
new kernel and may result in wrong data.

In order to ensure that the address is correct after migration,
if an old magic number is detected, the dma address needs to be
updated.

Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
---
 .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 41 ++++++++++++++++---
 .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h    | 14 ++++++-
 2 files changed, 47 insertions(+), 8 deletions(-)

diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
index 451c639299eb..304dbdfa0e95 100644
--- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
+++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
@@ -350,6 +350,32 @@ static int vf_qm_func_stop(struct hisi_qm *qm)
 	return hisi_qm_mb(qm, QM_MB_CMD_PAUSE_QM, 0, 0, 0);
 }
 
+static int vf_qm_version_check(struct acc_vf_data *vf_data, struct device *dev)
+{
+	switch (vf_data->acc_magic) {
+	case ACC_DEV_MAGIC_V2:
+		if (vf_data->major_ver != ACC_DRV_MAJOR_VER) {
+			dev_info(dev, "migration driver version<%u.%u> not match!\n",
+				 vf_data->major_ver, vf_data->minor_ver);
+			return -EINVAL;
+		}
+		break;
+	case ACC_DEV_MAGIC_V1:
+		/* Correct dma address */
+		vf_data->eqe_dma = vf_data->qm_eqc_dw[QM_XQC_ADDR_HIGH];
+		vf_data->eqe_dma <<= QM_XQC_ADDR_OFFSET;
+		vf_data->eqe_dma |= vf_data->qm_eqc_dw[QM_XQC_ADDR_LOW];
+		vf_data->aeqe_dma = vf_data->qm_aeqc_dw[QM_XQC_ADDR_HIGH];
+		vf_data->aeqe_dma <<= QM_XQC_ADDR_OFFSET;
+		vf_data->aeqe_dma |= vf_data->qm_aeqc_dw[QM_XQC_ADDR_LOW];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int vf_qm_check_match(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 			     struct hisi_acc_vf_migration_file *migf)
 {
@@ -363,7 +389,8 @@ static int vf_qm_check_match(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 	if (migf->total_length < QM_MATCH_SIZE || hisi_acc_vdev->match_done)
 		return 0;
 
-	if (vf_data->acc_magic != ACC_DEV_MAGIC) {
+	ret = vf_qm_version_check(vf_data, dev);
+	if (ret) {
 		dev_err(dev, "failed to match ACC_DEV_MAGIC\n");
 		return -EINVAL;
 	}
@@ -418,7 +445,9 @@ static int vf_qm_get_match_data(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 	int vf_id = hisi_acc_vdev->vf_id;
 	int ret;
 
-	vf_data->acc_magic = ACC_DEV_MAGIC;
+	vf_data->acc_magic = ACC_DEV_MAGIC_V2;
+	vf_data->major_ver = ACC_DRV_MAJOR_VER;
+	vf_data->minor_ver = ACC_DRV_MINOR_VER;
 	/* Save device id */
 	vf_data->dev_id = hisi_acc_vdev->vf_dev->device;
 
@@ -496,12 +525,12 @@ static int vf_qm_read_data(struct hisi_qm *vf_qm, struct acc_vf_data *vf_data)
 		return -EINVAL;
 
 	/* Every reg is 32 bit, the dma address is 64 bit. */
-	vf_data->eqe_dma = vf_data->qm_eqc_dw[1];
+	vf_data->eqe_dma = vf_data->qm_eqc_dw[QM_XQC_ADDR_HIGH];
 	vf_data->eqe_dma <<= QM_XQC_ADDR_OFFSET;
-	vf_data->eqe_dma |= vf_data->qm_eqc_dw[0];
-	vf_data->aeqe_dma = vf_data->qm_aeqc_dw[1];
+	vf_data->eqe_dma |= vf_data->qm_eqc_dw[QM_XQC_ADDR_LOW];
+	vf_data->aeqe_dma = vf_data->qm_aeqc_dw[QM_XQC_ADDR_HIGH];
 	vf_data->aeqe_dma <<= QM_XQC_ADDR_OFFSET;
-	vf_data->aeqe_dma |= vf_data->qm_aeqc_dw[0];
+	vf_data->aeqe_dma |= vf_data->qm_aeqc_dw[QM_XQC_ADDR_LOW];
 
 	/* Through SQC_BT/CQC_BT to get sqc and cqc address */
 	ret = qm_get_sqc(vf_qm, &vf_data->sqc_dma);
diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
index 245d7537b2bc..91002ceeebc1 100644
--- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
+++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
@@ -39,6 +39,9 @@
 #define QM_REG_ADDR_OFFSET	0x0004
 
 #define QM_XQC_ADDR_OFFSET	32U
+#define QM_XQC_ADDR_LOW	0x1
+#define QM_XQC_ADDR_HIGH	0x2
+
 #define QM_VF_AEQ_INT_MASK	0x0004
 #define QM_VF_EQ_INT_MASK	0x000c
 #define QM_IFC_INT_SOURCE_V	0x0020
@@ -50,10 +53,15 @@
 #define QM_EQC_DW0		0X8000
 #define QM_AEQC_DW0		0X8020
 
+#define ACC_DRV_MAJOR_VER 1
+#define ACC_DRV_MINOR_VER 0
+
+#define ACC_DEV_MAGIC_V1	0XCDCDCDCDFEEDAACC
+#define ACC_DEV_MAGIC_V2	0xAACCFEEDDECADEDE
+
 struct acc_vf_data {
 #define QM_MATCH_SIZE offsetofend(struct acc_vf_data, qm_rsv_state)
 	/* QM match information */
-#define ACC_DEV_MAGIC	0XCDCDCDCDFEEDAACC
 	u64 acc_magic;
 	u32 qp_num;
 	u32 dev_id;
@@ -61,7 +69,9 @@ struct acc_vf_data {
 	u32 qp_base;
 	u32 vf_qm_state;
 	/* QM reserved match information */
-	u32 qm_rsv_state[3];
+	u16 major_ver;
+	u16 minor_ver;
+	u32 qm_rsv_state[2];
 
 	/* QM RW regs */
 	u32 aeq_int_mask;
-- 
2.24.0

[PATCH v8 2/6] hisi_acc_vfio_pci: add eq and aeq interruption restore

[Longfang Liu]

In order to ensure that the task packets of the accelerator
device are not lost during the migration process, it is necessary
to send an EQ and AEQ command to the device after the live migration
is completed and to update the completion position of the task queue.

Let the device recheck the completed tasks data and if there are
uncollected packets, device resend a task completion interrupt
to the software.

Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
---
 drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
index 304dbdfa0e95..80217aea5475 100644
--- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
+++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
@@ -470,6 +470,19 @@ static int vf_qm_get_match_data(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 	return 0;
 }
 
+static void vf_qm_xeqc_save(struct hisi_qm *qm,
+			    struct hisi_acc_vf_migration_file *migf)
+{
+	struct acc_vf_data *vf_data = &migf->vf_data;
+	u16 eq_head, aeq_head;
+
+	eq_head = vf_data->qm_eqc_dw[0] & 0xFFFF;
+	qm_db(qm, 0, QM_DOORBELL_CMD_EQ, eq_head, 0);
+
+	aeq_head = vf_data->qm_aeqc_dw[0] & 0xFFFF;
+	qm_db(qm, 0, QM_DOORBELL_CMD_AEQ, aeq_head, 0);
+}
+
 static int vf_qm_load_data(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 			   struct hisi_acc_vf_migration_file *migf)
 {
@@ -578,6 +591,9 @@ static int vf_qm_state_save(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 		return -EINVAL;
 
 	migf->total_length = sizeof(struct acc_vf_data);
+	/* Save eqc and aeqc interrupt information */
+	vf_qm_xeqc_save(vf_qm, migf);
+
 	return 0;
 }
 
-- 
2.24.0

[PATCH v8 3/6] hisi_acc_vfio_pci: bugfix cache write-back issue

[Longfang Liu]

At present, cache write-back is placed in the device data
copy stage after stopping the device operation.
Writing back to the cache at this stage will cause the data
obtained by the cache to be written back to be empty.

In order to ensure that the cache data is written back
successfully, the data needs to be written back into the
stop device stage.

Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
---
 drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
index 80217aea5475..d96446f499ed 100644
--- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
+++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
@@ -566,7 +566,6 @@ static int vf_qm_state_save(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 {
 	struct acc_vf_data *vf_data = &migf->vf_data;
 	struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
-	struct device *dev = &vf_qm->pdev->dev;
 	int ret;
 
 	if (unlikely(qm_wait_dev_not_ready(vf_qm))) {
@@ -580,12 +579,6 @@ static int vf_qm_state_save(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 	vf_data->vf_qm_state = QM_READY;
 	hisi_acc_vdev->vf_qm_state = vf_data->vf_qm_state;
 
-	ret = vf_qm_cache_wb(vf_qm);
-	if (ret) {
-		dev_err(dev, "failed to writeback QM Cache!\n");
-		return ret;
-	}
-
 	ret = vf_qm_read_data(vf_qm, vf_data);
 	if (ret)
 		return -EINVAL;
@@ -1012,6 +1005,13 @@ static int hisi_acc_vf_stop_device(struct hisi_acc_vf_core_device *hisi_acc_vdev
 		dev_err(dev, "failed to check QM INT state!\n");
 		return ret;
 	}
+
+	ret = vf_qm_cache_wb(vf_qm);
+	if (ret) {
+		dev_err(dev, "failed to writeback QM cache!\n");
+		return ret;
+	}
+
 	return 0;
 }
 
-- 
2.24.0

[PATCH v8 4/6] hisi_acc_vfio_pci: bugfix the problem of uninstalling driver

[Longfang Liu]

In a live migration scenario. If the number of VFs at the
destination is greater than the source, the recovery operation
will fail and qemu will not be able to complete the process and
exit after shutting down the device FD.

This will cause the driver to be unable to be unloaded normally due
to abnormal reference counting of the live migration driver caused
by the abnormal closing operation of fd.

Therefore, make sure the migration file descriptor references are
always released when the device is closed.

Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
---
 drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
index d96446f499ed..cadc82419dca 100644
--- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
+++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
@@ -1508,6 +1508,7 @@ static void hisi_acc_vfio_pci_close_device(struct vfio_device *core_vdev)
 	struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_get_vf_dev(core_vdev);
 	struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
 
+	hisi_acc_vf_disable_fds(hisi_acc_vdev);
 	mutex_lock(&hisi_acc_vdev->open_mutex);
 	hisi_acc_vdev->dev_opened = false;
 	iounmap(vf_qm->io_base);
-- 
2.24.0

[PATCH v8 5/6] hisi_acc_vfio_pci: bugfix live migration function without VF device driver

[Longfang Liu]

If the VF device driver is not loaded in the Guest OS and we attempt to
perform device data migration, the address of the migrated data will
be NULL.
The live migration recovery operation on the destination side will
access a null address value, which will cause access errors.

Therefore, live migration of VMs without added VF device drivers
does not require device data migration.
In addition, when the queue address data obtained by the destination
is empty, device queue recovery processing will not be performed.

Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
---
 .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 22 +++++++++++++------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
index cadc82419dca..d12a350440d3 100644
--- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
+++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
@@ -426,13 +426,6 @@ static int vf_qm_check_match(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 		return -EINVAL;
 	}
 
-	ret = qm_write_regs(vf_qm, QM_VF_STATE, &vf_data->vf_qm_state, 1);
-	if (ret) {
-		dev_err(dev, "failed to write QM_VF_STATE\n");
-		return ret;
-	}
-
-	hisi_acc_vdev->vf_qm_state = vf_data->vf_qm_state;
 	hisi_acc_vdev->match_done = true;
 	return 0;
 }
@@ -498,6 +491,20 @@ static int vf_qm_load_data(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 	if (migf->total_length < sizeof(struct acc_vf_data))
 		return -EINVAL;
 
+	if (!vf_data->eqe_dma || !vf_data->aeqe_dma ||
+	    !vf_data->sqc_dma || !vf_data->cqc_dma) {
+		dev_info(dev, "resume dma addr is NULL!\n");
+		hisi_acc_vdev->vf_qm_state = QM_NOT_READY;
+		return 0;
+	}
+
+	ret = qm_write_regs(qm, QM_VF_STATE, &vf_data->vf_qm_state, 1);
+	if (ret) {
+		dev_err(dev, "failed to write QM_VF_STATE\n");
+		return -EINVAL;
+	}
+	hisi_acc_vdev->vf_qm_state = vf_data->vf_qm_state;
+
 	qm->eqe_dma = vf_data->eqe_dma;
 	qm->aeqe_dma = vf_data->aeqe_dma;
 	qm->sqc_dma = vf_data->sqc_dma;
@@ -1531,6 +1538,7 @@ static int hisi_acc_vfio_pci_migrn_init_dev(struct vfio_device *core_vdev)
 	hisi_acc_vdev->vf_id = pci_iov_vf_id(pdev) + 1;
 	hisi_acc_vdev->pf_qm = pf_qm;
 	hisi_acc_vdev->vf_dev = pdev;
+	hisi_acc_vdev->vf_qm_state = QM_NOT_READY;
 	mutex_init(&hisi_acc_vdev->state_mutex);
 	mutex_init(&hisi_acc_vdev->open_mutex);
 
-- 
2.24.0

[PATCH v8 6/6] hisi_acc_vfio_pci: update function return values.

[Longfang Liu]

In this driver file, many functions call sub-functions and use ret
to store the error code of the sub-functions.
However, instead of directly returning ret to the caller, they use a
converted error code, which prevents the end-user from clearly
understanding the root cause of the error.
Therefore, the code needs to be modified to directly return the error
code from the sub-functions.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
---
 .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 29 ++++++++++---------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
index d12a350440d3..2149f49aeec7 100644
--- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
+++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
@@ -190,9 +190,10 @@ static int qm_set_regs(struct hisi_qm *qm, struct acc_vf_data *vf_data)
 	int ret;
 
 	/* Check VF state */
-	if (unlikely(hisi_qm_wait_mb_ready(qm))) {
+	ret = hisi_qm_wait_mb_ready(qm);
+	if (unlikely(ret)) {
 		dev_err(&qm->pdev->dev, "QM device is not ready to write\n");
-		return -EBUSY;
+		return ret;
 	}
 
 	ret = qm_write_regs(qm, QM_VF_AEQ_INT_MASK, &vf_data->aeq_int_mask, 1);
@@ -325,13 +326,15 @@ static void qm_dev_cmd_init(struct hisi_qm *qm)
 static int vf_qm_cache_wb(struct hisi_qm *qm)
 {
 	unsigned int val;
+	int ret;
 
 	writel(0x1, qm->io_base + QM_CACHE_WB_START);
-	if (readl_relaxed_poll_timeout(qm->io_base + QM_CACHE_WB_DONE,
+	ret = readl_relaxed_poll_timeout(qm->io_base + QM_CACHE_WB_DONE,
 				       val, val & BIT(0), MB_POLL_PERIOD_US,
-				       MB_POLL_TIMEOUT_US)) {
+				       MB_POLL_TIMEOUT_US);
+	if (ret) {
 		dev_err(&qm->pdev->dev, "vf QM writeback sqc cache fail\n");
-		return -EINVAL;
+		return ret;
 	}
 
 	return 0;
@@ -392,7 +395,7 @@ static int vf_qm_check_match(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 	ret = vf_qm_version_check(vf_data, dev);
 	if (ret) {
 		dev_err(dev, "failed to match ACC_DEV_MAGIC\n");
-		return -EINVAL;
+		return ret;
 	}
 
 	if (vf_data->dev_id != hisi_acc_vdev->vf_dev->device) {
@@ -404,7 +407,7 @@ static int vf_qm_check_match(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 	ret = qm_get_vft(vf_qm, &vf_qm->qp_base);
 	if (ret <= 0) {
 		dev_err(dev, "failed to get vft qp nums\n");
-		return -EINVAL;
+		return ret;
 	}
 
 	if (ret != vf_data->qp_num) {
@@ -501,7 +504,7 @@ static int vf_qm_load_data(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 	ret = qm_write_regs(qm, QM_VF_STATE, &vf_data->vf_qm_state, 1);
 	if (ret) {
 		dev_err(dev, "failed to write QM_VF_STATE\n");
-		return -EINVAL;
+		return ret;
 	}
 	hisi_acc_vdev->vf_qm_state = vf_data->vf_qm_state;
 
@@ -542,7 +545,7 @@ static int vf_qm_read_data(struct hisi_qm *vf_qm, struct acc_vf_data *vf_data)
 
 	ret = qm_get_regs(vf_qm, vf_data);
 	if (ret)
-		return -EINVAL;
+		return ret;
 
 	/* Every reg is 32 bit, the dma address is 64 bit. */
 	vf_data->eqe_dma = vf_data->qm_eqc_dw[QM_XQC_ADDR_HIGH];
@@ -556,13 +559,13 @@ static int vf_qm_read_data(struct hisi_qm *vf_qm, struct acc_vf_data *vf_data)
 	ret = qm_get_sqc(vf_qm, &vf_data->sqc_dma);
 	if (ret) {
 		dev_err(dev, "failed to read SQC addr!\n");
-		return -EINVAL;
+		return ret;
 	}
 
 	ret = qm_get_cqc(vf_qm, &vf_data->cqc_dma);
 	if (ret) {
 		dev_err(dev, "failed to read CQC addr!\n");
-		return -EINVAL;
+		return ret;
 	}
 
 	return 0;
@@ -588,7 +591,7 @@ static int vf_qm_state_save(struct hisi_acc_vf_core_device *hisi_acc_vdev,
 
 	ret = vf_qm_read_data(vf_qm, vf_data);
 	if (ret)
-		return -EINVAL;
+		return ret;
 
 	migf->total_length = sizeof(struct acc_vf_data);
 	/* Save eqc and aeqc interrupt information */
@@ -1379,7 +1382,7 @@ static int hisi_acc_vf_debug_check(struct seq_file *seq, struct vfio_device *vde
 	ret = qm_wait_dev_not_ready(vf_qm);
 	if (ret) {
 		seq_puts(seq, "VF device not ready!\n");
-		return -EBUSY;
+		return ret;
 	}
 
 	return 0;
-- 
2.24.0

Re: [PATCH v8 0/6] bugfix some driver issues

[Alex Williamson]

On Sat, 10 May 2025 16:11:49 +0800
Longfang Liu <liulongfang@huawei.com> wrote:

> As the test scenarios for the live migration function become
> more and more extensive. Some previously undiscovered driver
> issues were found.
> Update and fix through this patchset.
> 
> Change v7 -> v8
> 	Handle the return value of sub-functions.
> 
> Change v6 -> v7
> 	Update function return values.
> 
> Change v5 -> v6
> 	Remove redundant vf_qm_state status checks.
> 
> Change v4 -> v5
> 	Update version matching strategy
> 
> Change v3 -> v4
> 	Modify version matching scheme
> 
> Change v2 -> v3
> 	Modify the magic digital field segment
> 
> Change v1 -> v2
> 	Add fixes line for patch comment
> 
> Longfang Liu (6):
>   hisi_acc_vfio_pci: fix XQE dma address error
>   hisi_acc_vfio_pci: add eq and aeq interruption restore
>   hisi_acc_vfio_pci: bugfix cache write-back issue
>   hisi_acc_vfio_pci: bugfix the problem of uninstalling driver
>   hisi_acc_vfio_pci: bugfix live migration function without VF device
>     driver
>   hisi_acc_vfio_pci: update function return values.
> 
>  .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 121 +++++++++++++-----
>  .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h    |  14 +-
>  2 files changed, 101 insertions(+), 34 deletions(-)
> 

Applied to vfio next branch for v6.16.  Thanks,

Alex

Re: [PATCH v8 0/6] bugfix some driver issues

[liulongfang]

On 2025/5/20 23:39, Alex Williamson write:
> On Sat, 10 May 2025 16:11:49 +0800
> Longfang Liu <liulongfang@huawei.com> wrote:
> 
>> As the test scenarios for the live migration function become
>> more and more extensive. Some previously undiscovered driver
>> issues were found.
>> Update and fix through this patchset.
>>
>> Change v7 -> v8
>> 	Handle the return value of sub-functions.
>>
>> Change v6 -> v7
>> 	Update function return values.
>>
>> Change v5 -> v6
>> 	Remove redundant vf_qm_state status checks.
>>
>> Change v4 -> v5
>> 	Update version matching strategy
>>
>> Change v3 -> v4
>> 	Modify version matching scheme
>>
>> Change v2 -> v3
>> 	Modify the magic digital field segment
>>
>> Change v1 -> v2
>> 	Add fixes line for patch comment
>>
>> Longfang Liu (6):
>>   hisi_acc_vfio_pci: fix XQE dma address error
>>   hisi_acc_vfio_pci: add eq and aeq interruption restore
>>   hisi_acc_vfio_pci: bugfix cache write-back issue
>>   hisi_acc_vfio_pci: bugfix the problem of uninstalling driver
>>   hisi_acc_vfio_pci: bugfix live migration function without VF device
>>     driver
>>   hisi_acc_vfio_pci: update function return values.
>>
>>  .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c    | 121 +++++++++++++-----
>>  .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h    |  14 +-
>>  2 files changed, 101 insertions(+), 34 deletions(-)
>>
> 
> Applied to vfio next branch for v6.16.  Thanks,
> 
> Alex
>

Thank you very much!
Longfang.

> 
> .
>