From: Chao Gao <chao.gao@intel.com>
To: kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: chao.gao@intel.com, bp@alien8.de, dave.hansen@linux.intel.com,
hpa@zytor.com, john.allen@amd.com, mingo@redhat.com,
minipli@grsecurity.net, mlevitsk@redhat.com, pbonzini@redhat.com,
rick.p.edgecombe@intel.com, seanjc@google.com,
tglx@linutronix.de, weijiang.yang@intel.com, x86@kernel.org,
xin@zytor.com
Subject: [PATCH v13 11/21] KVM: x86: Save and reload SSP to/from SMRAM
Date: Thu, 21 Aug 2025 06:30:45 -0700 [thread overview]
Message-ID: <20250821133132.72322-12-chao.gao@intel.com> (raw)
In-Reply-To: <20250821133132.72322-1-chao.gao@intel.com>
From: Yang Weijiang <weijiang.yang@intel.com>
Save CET SSP to SMRAM on SMI and reload it on RSM. KVM emulates HW arch
behavior when guest enters/leaves SMM mode,i.e., save registers to SMRAM
at the entry of SMM and reload them at the exit to SMM. Per SDM, SSP is
one of such registers on 64-bit Arch, and add the support for SSP.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Tested-by: Mathias Krause <minipli@grsecurity.net>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
---
arch/x86/kvm/smm.c | 8 ++++++++
arch/x86/kvm/smm.h | 2 +-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kvm/smm.c b/arch/x86/kvm/smm.c
index 5dd8a1646800..b0b14ba37f9a 100644
--- a/arch/x86/kvm/smm.c
+++ b/arch/x86/kvm/smm.c
@@ -269,6 +269,10 @@ static void enter_smm_save_state_64(struct kvm_vcpu *vcpu,
enter_smm_save_seg_64(vcpu, &smram->gs, VCPU_SREG_GS);
smram->int_shadow = kvm_x86_call(get_interrupt_shadow)(vcpu);
+
+ if (guest_cpu_cap_has(vcpu, X86_FEATURE_SHSTK) &&
+ kvm_msr_read(vcpu, MSR_KVM_INTERNAL_GUEST_SSP, &smram->ssp))
+ kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
}
#endif
@@ -558,6 +562,10 @@ static int rsm_load_state_64(struct x86_emulate_ctxt *ctxt,
kvm_x86_call(set_interrupt_shadow)(vcpu, 0);
ctxt->interruptibility = (u8)smstate->int_shadow;
+ if (guest_cpu_cap_has(vcpu, X86_FEATURE_SHSTK) &&
+ kvm_msr_write(vcpu, MSR_KVM_INTERNAL_GUEST_SSP, smstate->ssp))
+ return X86EMUL_UNHANDLEABLE;
+
return X86EMUL_CONTINUE;
}
#endif
diff --git a/arch/x86/kvm/smm.h b/arch/x86/kvm/smm.h
index 551703fbe200..db3c88f16138 100644
--- a/arch/x86/kvm/smm.h
+++ b/arch/x86/kvm/smm.h
@@ -116,8 +116,8 @@ struct kvm_smram_state_64 {
u32 smbase;
u32 reserved4[5];
- /* ssp and svm_* fields below are not implemented by KVM */
u64 ssp;
+ /* svm_* fields below are not implemented by KVM */
u64 svm_guest_pat;
u64 svm_host_efer;
u64 svm_host_cr4;
--
2.47.3
next prev parent reply other threads:[~2025-08-21 13:32 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-21 13:30 [PATCH v13 00/21] Enable CET Virtualization Chao Gao
2025-08-21 13:30 ` [PATCH v13 01/21] KVM: x86: Introduce KVM_{G,S}ET_ONE_REG uAPIs support Chao Gao
2025-08-28 12:58 ` Xiaoyao Li
2025-08-29 0:43 ` Chao Gao
2025-08-29 22:01 ` Sean Christopherson
2025-08-21 13:30 ` [PATCH v13 02/21] KVM: x86: Report XSS as to-be-saved if there are supported features Chao Gao
2025-08-29 6:37 ` Xiaoyao Li
2025-08-21 13:30 ` [PATCH v13 03/21] KVM: x86: Refresh CPUID on write to guest MSR_IA32_XSS Chao Gao
2025-08-29 6:47 ` Xiaoyao Li
2025-08-29 10:40 ` Chao Gao
2025-08-21 13:30 ` [PATCH v13 04/21] KVM: x86: Initialize kvm_caps.supported_xss Chao Gao
2025-08-29 7:05 ` Xiaoyao Li
2025-08-29 10:29 ` Chao Gao
2025-08-21 13:30 ` [PATCH v13 05/21] KVM: x86: Load guest FPU state when access XSAVE-managed MSRs Chao Gao
2025-08-25 1:52 ` Xin Li
2025-08-25 2:55 ` Chao Gao
2025-08-26 6:54 ` Xin Li
2025-08-27 4:56 ` Xin Li
2025-08-27 15:09 ` Sean Christopherson
2025-08-21 13:30 ` [PATCH v13 06/21] KVM: x86: Add fault checks for guest CR4.CET setting Chao Gao
2025-08-21 13:30 ` [PATCH v13 07/21] KVM: x86: Report KVM supported CET MSRs as to-be-saved Chao Gao
2025-08-21 13:30 ` [PATCH v13 08/21] KVM: VMX: Introduce CET VMCS fields and control bits Chao Gao
2025-08-21 13:30 ` [PATCH v13 09/21] KVM: x86: Enable guest SSP read/write interface with new uAPIs Chao Gao
2025-08-21 13:30 ` [PATCH v13 10/21] KVM: VMX: Emulate read and write to CET MSRs Chao Gao
2025-08-21 13:30 ` Chao Gao [this message]
2025-08-21 13:30 ` [PATCH v13 12/21] KVM: VMX: Set up interception for " Chao Gao
2025-08-21 13:30 ` [PATCH v13 13/21] KVM: VMX: Set host constant supervisor states to VMCS fields Chao Gao
2025-08-21 13:30 ` [PATCH v13 14/21] KVM: x86: Don't emulate instructions guarded by CET Chao Gao
2025-08-21 13:30 ` [PATCH v13 15/21] KVM: x86: Enable CET virtualization for VMX and advertise to userspace Chao Gao
2025-08-21 13:30 ` [PATCH v13 16/21] KVM: nVMX: Virtualize NO_HW_ERROR_CODE_CC for L1 event injection to L2 Chao Gao
2025-08-21 13:30 ` [PATCH v13 17/21] KVM: nVMX: Prepare for enabling CET support for nested guest Chao Gao
2025-08-21 13:30 ` [PATCH v13 18/21] KVM: nVMX: Add consistency checks for CR0.WP and CR4.CET Chao Gao
2025-08-21 13:30 ` [PATCH v13 19/21] KVM: nVMX: Add consistency checks for CET states Chao Gao
2025-08-21 13:30 ` [PATCH v13 20/21] KVM: nVMX: Advertise new VM-Entry/Exit control bits for CET state Chao Gao
2025-08-21 13:30 ` [PATCH v13 21/21] KVM: selftest: Add tests for KVM_{GET,SET}_ONE_REG Chao Gao
2025-08-21 13:35 ` [PATCH v13 00/21] Enable CET Virtualization Chao Gao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250821133132.72322-12-chao.gao@intel.com \
--to=chao.gao@intel.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=john.allen@amd.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=minipli@grsecurity.net \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=rick.p.edgecombe@intel.com \
--cc=seanjc@google.com \
--cc=tglx@linutronix.de \
--cc=weijiang.yang@intel.com \
--cc=x86@kernel.org \
--cc=xin@zytor.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).