From: Farhan Ali <alifm@linux.ibm.com>
To: linux-s390@vger.kernel.org, kvm@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Cc: alex.williamson@redhat.com, helgaas@kernel.org,
alifm@linux.ibm.com, schnelle@linux.ibm.com,
mjrosato@linux.ibm.com
Subject: [PATCH v3 05/10] s390/pci: Restore IRQ unconditionally for the zPCI device
Date: Thu, 11 Sep 2025 11:33:02 -0700 [thread overview]
Message-ID: <20250911183307.1910-6-alifm@linux.ibm.com> (raw)
In-Reply-To: <20250911183307.1910-1-alifm@linux.ibm.com>
Commit c1e18c17bda6 ("s390/pci: add zpci_set_irq()/zpci_clear_irq()"),
introduced the zpci_set_irq() and zpci_clear_irq(), to be used while
resetting a zPCI device.
Commit da995d538d3a ("s390/pci: implement reset_slot for hotplug slot"),
mentions zpci_clear_irq() being called in the path for zpci_hot_reset_device().
But that is not the case anymore and these functions are not called
outside of this file.
However after a CLP disable/enable reset, the device's IRQ are
unregistered, but the flag zdev->irq_registered does not get cleared. It
creates an inconsistent state and so arch_restore_msi_irqs() doesn't
correctly restore the device's IRQ. This becomes a problem when a PCI
driver tries to restore the state of the device through
pci_restore_state(). Restore IRQ unconditionally for the device and remove
the irq_registered flag as its redundant.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
---
arch/s390/include/asm/pci.h | 1 -
arch/s390/pci/pci_irq.c | 9 +--------
2 files changed, 1 insertion(+), 9 deletions(-)
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index 41f900f693d9..aed19a1aa9d7 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -145,7 +145,6 @@ struct zpci_dev {
u8 has_resources : 1;
u8 is_physfn : 1;
u8 util_str_avail : 1;
- u8 irqs_registered : 1;
u8 tid_avail : 1;
u8 rtr_avail : 1; /* Relaxed translation allowed */
unsigned int devfn; /* DEVFN part of the RID*/
diff --git a/arch/s390/pci/pci_irq.c b/arch/s390/pci/pci_irq.c
index 84482a921332..e73be96ce5fe 100644
--- a/arch/s390/pci/pci_irq.c
+++ b/arch/s390/pci/pci_irq.c
@@ -107,9 +107,6 @@ static int zpci_set_irq(struct zpci_dev *zdev)
else
rc = zpci_set_airq(zdev);
- if (!rc)
- zdev->irqs_registered = 1;
-
return rc;
}
@@ -123,9 +120,6 @@ static int zpci_clear_irq(struct zpci_dev *zdev)
else
rc = zpci_clear_airq(zdev);
- if (!rc)
- zdev->irqs_registered = 0;
-
return rc;
}
@@ -427,8 +421,7 @@ bool arch_restore_msi_irqs(struct pci_dev *pdev)
{
struct zpci_dev *zdev = to_zpci(pdev);
- if (!zdev->irqs_registered)
- zpci_set_irq(zdev);
+ zpci_set_irq(zdev);
return true;
}
--
2.43.0
next prev parent reply other threads:[~2025-09-11 18:33 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-11 18:32 [PATCH v3 00/10] Error recovery for vfio-pci devices on s390x Farhan Ali
2025-09-11 18:32 ` [PATCH v3 01/10] PCI: Avoid saving error values for config space Farhan Ali
2025-09-13 8:27 ` Alex Williamson
2025-09-15 17:15 ` Farhan Ali
2025-09-16 18:09 ` Bjorn Helgaas
2025-09-16 20:00 ` Farhan Ali
2025-09-19 18:17 ` Alex Williamson
2025-09-11 18:32 ` [PATCH v3 02/10] PCI: Add additional checks for flr reset Farhan Ali
2025-09-11 18:33 ` [PATCH v3 03/10] PCI: Allow per function PCI slots Farhan Ali
2025-09-12 12:23 ` Benjamin Block
2025-09-12 17:19 ` Farhan Ali
2025-09-16 6:52 ` Cédric Le Goater
2025-09-16 18:37 ` Farhan Ali
2025-09-17 6:21 ` Cédric Le Goater
2025-09-17 17:50 ` Farhan Ali
2025-09-11 18:33 ` [PATCH v3 04/10] s390/pci: Add architecture specific resource/bus address translation Farhan Ali
2025-09-17 14:48 ` Niklas Schnelle
2025-09-17 17:22 ` Farhan Ali
2025-09-11 18:33 ` Farhan Ali [this message]
2025-09-15 8:39 ` [PATCH v3 05/10] s390/pci: Restore IRQ unconditionally for the zPCI device Niklas Schnelle
2025-09-15 17:42 ` Farhan Ali
2025-09-16 10:59 ` Niklas Schnelle
2025-09-11 18:33 ` [PATCH v3 06/10] s390/pci: Update the logic for detecting passthrough device Farhan Ali
2025-09-15 9:22 ` Niklas Schnelle
2025-09-11 18:33 ` [PATCH v3 07/10] s390/pci: Store PCI error information for passthrough devices Farhan Ali
2025-09-15 11:42 ` Niklas Schnelle
2025-09-15 18:12 ` Farhan Ali
2025-09-16 10:54 ` Niklas Schnelle
2025-09-11 18:33 ` [PATCH v3 08/10] vfio-pci/zdev: Add a device feature for error information Farhan Ali
2025-09-13 9:04 ` Alex Williamson
2025-09-15 18:27 ` Farhan Ali
2025-09-15 6:26 ` Cédric Le Goater
2025-09-15 18:27 ` Farhan Ali
2025-09-11 18:33 ` [PATCH v3 09/10] vfio: Add a reset_done callback for vfio-pci driver Farhan Ali
2025-09-11 18:33 ` [PATCH v3 10/10] vfio: Remove the pcie check for VFIO_PCI_ERR_IRQ_INDEX Farhan Ali
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250911183307.1910-6-alifm@linux.ibm.com \
--to=alifm@linux.ibm.com \
--cc=alex.williamson@redhat.com \
--cc=helgaas@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mjrosato@linux.ibm.com \
--cc=schnelle@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox