[PATCH 07/12] vfio: selftests: Prefix logs with device BDF where relevant

[David Matlack <dmatlack@google.com>]

Prefix log messages with the device's BDF where relevant. This will help
understanding VFIO selftests logs when tests are run with multiple
devices.

Signed-off-by: David Matlack <dmatlack@google.com>
---
 .../selftests/vfio/lib/drivers/dsa/dsa.c      | 34 +++++++++----------
 .../selftests/vfio/lib/drivers/ioat/ioat.c    | 16 ++++-----
 .../selftests/vfio/lib/include/vfio_util.h    |  4 +++
 .../selftests/vfio/lib/vfio_pci_device.c      |  1 +
 4 files changed, 30 insertions(+), 25 deletions(-)

diff --git a/tools/testing/selftests/vfio/lib/drivers/dsa/dsa.c b/tools/testing/selftests/vfio/lib/drivers/dsa/dsa.c
index 0ca2cbc2a316..8d667be80229 100644
--- a/tools/testing/selftests/vfio/lib/drivers/dsa/dsa.c
+++ b/tools/testing/selftests/vfio/lib/drivers/dsa/dsa.c
@@ -70,7 +70,7 @@ static int dsa_probe(struct vfio_pci_device *device)
 		return -EINVAL;
 
 	if (dsa_int_handle_request_required(device)) {
-		printf("Device requires requesting interrupt handles\n");
+		dev_info(device, "Device requires requesting interrupt handles\n");
 		return -EINVAL;
 	}
 
@@ -91,23 +91,23 @@ static void dsa_check_sw_err(struct vfio_pci_device *device)
 			return;
 	}
 
-	fprintf(stderr, "SWERR: 0x%016lx 0x%016lx 0x%016lx 0x%016lx\n",
+	dev_err(device, "SWERR: 0x%016lx 0x%016lx 0x%016lx 0x%016lx\n",
 		err.bits[0], err.bits[1], err.bits[2], err.bits[3]);
 
-	fprintf(stderr, "  valid: 0x%x\n", err.valid);
-	fprintf(stderr, "  overflow: 0x%x\n", err.overflow);
-	fprintf(stderr, "  desc_valid: 0x%x\n", err.desc_valid);
-	fprintf(stderr, "  wq_idx_valid: 0x%x\n", err.wq_idx_valid);
-	fprintf(stderr, "  batch: 0x%x\n", err.batch);
-	fprintf(stderr, "  fault_rw: 0x%x\n", err.fault_rw);
-	fprintf(stderr, "  priv: 0x%x\n", err.priv);
-	fprintf(stderr, "  error: 0x%x\n", err.error);
-	fprintf(stderr, "  wq_idx: 0x%x\n", err.wq_idx);
-	fprintf(stderr, "  operation: 0x%x\n", err.operation);
-	fprintf(stderr, "  pasid: 0x%x\n", err.pasid);
-	fprintf(stderr, "  batch_idx: 0x%x\n", err.batch_idx);
-	fprintf(stderr, "  invalid_flags: 0x%x\n", err.invalid_flags);
-	fprintf(stderr, "  fault_addr: 0x%lx\n", err.fault_addr);
+	dev_err(device, "  valid: 0x%x\n", err.valid);
+	dev_err(device, "  overflow: 0x%x\n", err.overflow);
+	dev_err(device, "  desc_valid: 0x%x\n", err.desc_valid);
+	dev_err(device, "  wq_idx_valid: 0x%x\n", err.wq_idx_valid);
+	dev_err(device, "  batch: 0x%x\n", err.batch);
+	dev_err(device, "  fault_rw: 0x%x\n", err.fault_rw);
+	dev_err(device, "  priv: 0x%x\n", err.priv);
+	dev_err(device, "  error: 0x%x\n", err.error);
+	dev_err(device, "  wq_idx: 0x%x\n", err.wq_idx);
+	dev_err(device, "  operation: 0x%x\n", err.operation);
+	dev_err(device, "  pasid: 0x%x\n", err.pasid);
+	dev_err(device, "  batch_idx: 0x%x\n", err.batch_idx);
+	dev_err(device, "  invalid_flags: 0x%x\n", err.invalid_flags);
+	dev_err(device, "  fault_addr: 0x%lx\n", err.fault_addr);
 
 	VFIO_FAIL("Software Error Detected!\n");
 }
@@ -256,7 +256,7 @@ static int dsa_completion_wait(struct vfio_pci_device *device,
 	if (status == DSA_COMP_SUCCESS)
 		return 0;
 
-	printf("Error detected during memcpy operation: 0x%x\n", status);
+	dev_info(device, "Error detected during memcpy operation: 0x%x\n", status);
 	return -1;
 }
 
diff --git a/tools/testing/selftests/vfio/lib/drivers/ioat/ioat.c b/tools/testing/selftests/vfio/lib/drivers/ioat/ioat.c
index c3b91d9b1f59..e04dce1d544c 100644
--- a/tools/testing/selftests/vfio/lib/drivers/ioat/ioat.c
+++ b/tools/testing/selftests/vfio/lib/drivers/ioat/ioat.c
@@ -51,7 +51,7 @@ static int ioat_probe(struct vfio_pci_device *device)
 		r = 0;
 		break;
 	default:
-		printf("ioat: Unsupported version: 0x%x\n", version);
+		dev_info(device, "ioat: Unsupported version: 0x%x\n", version);
 		r = -EINVAL;
 	}
 	return r;
@@ -135,13 +135,13 @@ static void ioat_handle_error(struct vfio_pci_device *device)
 {
 	void *registers = ioat_channel_registers(device);
 
-	printf("Error detected during memcpy operation!\n"
-	       "  CHANERR: 0x%x\n"
-	       "  CHANERR_INT: 0x%x\n"
-	       "  DMAUNCERRSTS: 0x%x\n",
-	       readl(registers + IOAT_CHANERR_OFFSET),
-	       vfio_pci_config_readl(device, IOAT_PCI_CHANERR_INT_OFFSET),
-	       vfio_pci_config_readl(device, IOAT_PCI_DMAUNCERRSTS_OFFSET));
+	dev_info(device, "Error detected during memcpy operation!\n"
+		 "  CHANERR: 0x%x\n"
+		 "  CHANERR_INT: 0x%x\n"
+		 "  DMAUNCERRSTS: 0x%x\n",
+		 readl(registers + IOAT_CHANERR_OFFSET),
+		 vfio_pci_config_readl(device, IOAT_PCI_CHANERR_INT_OFFSET),
+		 vfio_pci_config_readl(device, IOAT_PCI_DMAUNCERRSTS_OFFSET));
 
 	ioat_reset(device);
 }
diff --git a/tools/testing/selftests/vfio/lib/include/vfio_util.h b/tools/testing/selftests/vfio/lib/include/vfio_util.h
index 8a01bcaa3ee8..b7175d4c2132 100644
--- a/tools/testing/selftests/vfio/lib/include/vfio_util.h
+++ b/tools/testing/selftests/vfio/lib/include/vfio_util.h
@@ -47,6 +47,9 @@
 	VFIO_LOG_AND_EXIT(_fmt, ##__VA_ARGS__);			\
 } while (0)
 
+#define dev_info(_dev, _fmt, ...) printf("%s: " _fmt, (_dev)->bdf, ##__VA_ARGS__)
+#define dev_err(_dev, _fmt, ...) fprintf(stderr, "%s: " _fmt, (_dev)->bdf, ##__VA_ARGS__)
+
 struct iommu_mode {
 	const char *name;
 	const char *container_path;
@@ -169,6 +172,7 @@ struct iommu {
 };
 
 struct vfio_pci_device {
+	const char *bdf;
 	int fd;
 	int group_fd;
 
diff --git a/tools/testing/selftests/vfio/lib/vfio_pci_device.c b/tools/testing/selftests/vfio/lib/vfio_pci_device.c
index de3a8d4d74f0..1788e7892ee3 100644
--- a/tools/testing/selftests/vfio/lib/vfio_pci_device.c
+++ b/tools/testing/selftests/vfio/lib/vfio_pci_device.c
@@ -538,6 +538,7 @@ struct vfio_pci_device *__vfio_pci_device_init(const char *bdf, struct iommu *io
 	device = calloc(1, sizeof(*device));
 	VFIO_ASSERT_NOT_NULL(device);
 
+	device->bdf = bdf;
 	device->iommu = iommu;
 
 	if (device->iommu->mode->container_path)
-- 
2.51.0.710.ga91ca5db03-goog