From: <ankita@nvidia.com>
To: <ankita@nvidia.com>, <jgg@ziepe.ca>, <yishaih@nvidia.com>,
<skolothumtho@nvidia.com>, <kevin.tian@intel.com>,
<alex@shazbot.org>, <aniketa@nvidia.com>, <vsethi@nvidia.com>,
<mochs@nvidia.com>
Cc: <Yunxiang.Li@amd.com>, <yi.l.liu@intel.com>,
<zhangdongdong@eswincomputing.com>, <avihaih@nvidia.com>,
<bhelgaas@google.com>, <peterx@redhat.com>, <pstanner@redhat.com>,
<apopple@nvidia.com>, <kvm@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <cjia@nvidia.com>,
<kwankhede@nvidia.com>, <targupta@nvidia.com>, <zhiw@nvidia.com>,
<danw@nvidia.com>, <dnigam@nvidia.com>, <kjaju@nvidia.com>
Subject: [PATCH v6 6/6] vfio/nvgrace-gpu: wait for the GPU mem to be ready
Date: Tue, 25 Nov 2025 17:30:13 +0000 [thread overview]
Message-ID: <20251125173013.39511-7-ankita@nvidia.com> (raw)
In-Reply-To: <20251125173013.39511-1-ankita@nvidia.com>
From: Ankit Agrawal <ankita@nvidia.com>
Speculative prefetches from CPU to GPU memory until the GPU is
ready after reset can cause harmless corrected RAS events to
be logged on Grace systems. It is thus preferred that the
mapping not be re-established until the GPU is ready post reset.
The GPU readiness can be checked through BAR0 registers similar
to the checking at the time of device probe.
It can take several seconds for the GPU to be ready. So it is
desirable that the time overlaps as much of the VM startup as
possible to reduce impact on the VM bootup time. The GPU
readiness state is thus checked on the first fault/huge_fault
request or read/write access which amortizes the GPU readiness
time.
The first fault and read/write checks the GPU state when the
reset_done flag - which denotes whether the GPU has just been
reset. The memory_lock is taken across map/access to avoid
races with GPU reset.
cc: Shameer Kolothum <skolothumtho@nvidia.com>
cc: Alex Williamson <alex@shazbot.org>
cc: Jason Gunthorpe <jgg@ziepe.ca>
cc: Vikram Sethi <vsethi@nvidia.com>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
---
drivers/vfio/pci/nvgrace-gpu/main.c | 66 ++++++++++++++++++++++++++---
1 file changed, 59 insertions(+), 7 deletions(-)
diff --git a/drivers/vfio/pci/nvgrace-gpu/main.c b/drivers/vfio/pci/nvgrace-gpu/main.c
index 7d5544280ed2..f9cea19093fa 100644
--- a/drivers/vfio/pci/nvgrace-gpu/main.c
+++ b/drivers/vfio/pci/nvgrace-gpu/main.c
@@ -104,6 +104,17 @@ static int nvgrace_gpu_open_device(struct vfio_device *core_vdev)
mutex_init(&nvdev->remap_lock);
}
+ /*
+ * GPU readiness is checked by reading the BAR0 registers.
+ *
+ * ioremap BAR0 to ensure that the BAR0 mapping is present before
+ * register reads on first fault before establishing any GPU
+ * memory mapping.
+ */
+ ret = vfio_pci_core_setup_barmap(vdev, 0);
+ if (ret)
+ return ret;
+
vfio_pci_core_finish_enable(vdev);
return 0;
@@ -146,6 +157,31 @@ static int nvgrace_gpu_wait_device_ready(void __iomem *io)
return -ETIME;
}
+/*
+ * If the GPU memory is accessed by the CPU while the GPU is not ready
+ * after reset, it can cause harmless corrected RAS events to be logged.
+ * Make sure the GPU is ready before establishing the mappings.
+ */
+static int
+nvgrace_gpu_check_device_ready(struct nvgrace_gpu_pci_core_device *nvdev)
+{
+ struct vfio_pci_core_device *vdev = &nvdev->core_device;
+ int ret;
+
+ lockdep_assert_held_read(&vdev->memory_lock);
+
+ if (!nvdev->reset_done)
+ return 0;
+
+ ret = nvgrace_gpu_wait_device_ready(vdev->barmap[0]);
+ if (ret)
+ return ret;
+
+ nvdev->reset_done = false;
+
+ return 0;
+}
+
static unsigned long addr_to_pgoff(struct vm_area_struct *vma,
unsigned long addr)
{
@@ -179,8 +215,12 @@ static vm_fault_t nvgrace_gpu_vfio_pci_huge_fault(struct vm_fault *vmf,
pfn & ((1 << order) - 1)))
return VM_FAULT_FALLBACK;
- scoped_guard(rwsem_read, &vdev->memory_lock)
+ scoped_guard(rwsem_read, &vdev->memory_lock) {
+ if (nvgrace_gpu_check_device_ready(nvdev))
+ return ret;
+
ret = vfio_pci_vmf_insert_pfn(vdev, vmf, pfn, order);
+ }
dev_dbg_ratelimited(&vdev->pdev->dev,
"%s order = %d pfn 0x%lx: 0x%x\n",
@@ -592,9 +632,15 @@ nvgrace_gpu_read_mem(struct nvgrace_gpu_pci_core_device *nvdev,
else
mem_count = min(count, memregion->memlength - (size_t)offset);
- ret = nvgrace_gpu_map_and_read(nvdev, buf, mem_count, ppos);
- if (ret)
- return ret;
+ scoped_guard(rwsem_read, &nvdev->core_device.memory_lock) {
+ ret = nvgrace_gpu_check_device_ready(nvdev);
+ if (ret)
+ return ret;
+
+ ret = nvgrace_gpu_map_and_read(nvdev, buf, mem_count, ppos);
+ if (ret)
+ return ret;
+ }
/*
* Only the device memory present on the hardware is mapped, which may
@@ -712,9 +758,15 @@ nvgrace_gpu_write_mem(struct nvgrace_gpu_pci_core_device *nvdev,
*/
mem_count = min(count, memregion->memlength - (size_t)offset);
- ret = nvgrace_gpu_map_and_write(nvdev, buf, mem_count, ppos);
- if (ret)
- return ret;
+ scoped_guard(rwsem_read, &nvdev->core_device.memory_lock) {
+ ret = nvgrace_gpu_check_device_ready(nvdev);
+ if (ret)
+ return ret;
+
+ ret = nvgrace_gpu_map_and_write(nvdev, buf, mem_count, ppos);
+ if (ret)
+ return ret;
+ }
exitfn:
*ppos += count;
--
2.34.1
next prev parent reply other threads:[~2025-11-25 17:30 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-25 17:30 [PATCH v6 0/6] vfio/nvgrace-gpu: Support huge PFNMAP and wait for GPU ready post reset ankita
2025-11-25 17:30 ` [PATCH v6 1/6] vfio: export function to map the VMA ankita
2025-11-25 20:04 ` Zhi Wang
2025-11-25 20:52 ` Alex Williamson
2025-11-25 17:30 ` [PATCH v6 2/6] vfio/nvgrace-gpu: Add support for huge pfnmap ankita
2025-11-25 19:58 ` Zhi Wang
2025-11-25 20:52 ` Alex Williamson
2025-11-25 17:30 ` [PATCH v6 3/6] vfio: use vfio_pci_core_setup_barmap to map bar in mmap ankita
2025-11-25 20:04 ` Zhi Wang
2025-11-25 17:30 ` [PATCH v6 4/6] vfio/nvgrace-gpu: split the code to wait for GPU ready ankita
2025-11-25 20:30 ` Zhi Wang
2025-11-25 20:52 ` Alex Williamson
2025-11-25 17:30 ` [PATCH v6 5/6] vfio/nvgrace-gpu: Inform devmem unmapped after reset ankita
2025-11-25 20:52 ` Alex Williamson
2025-11-26 3:26 ` Ankit Agrawal
2025-11-26 4:54 ` Alex Williamson
2025-11-25 17:30 ` ankita [this message]
2025-11-25 20:28 ` [PATCH v6 6/6] vfio/nvgrace-gpu: wait for the GPU mem to be ready Zhi Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251125173013.39511-7-ankita@nvidia.com \
--to=ankita@nvidia.com \
--cc=Yunxiang.Li@amd.com \
--cc=alex@shazbot.org \
--cc=aniketa@nvidia.com \
--cc=apopple@nvidia.com \
--cc=avihaih@nvidia.com \
--cc=bhelgaas@google.com \
--cc=cjia@nvidia.com \
--cc=danw@nvidia.com \
--cc=dnigam@nvidia.com \
--cc=jgg@ziepe.ca \
--cc=kevin.tian@intel.com \
--cc=kjaju@nvidia.com \
--cc=kvm@vger.kernel.org \
--cc=kwankhede@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mochs@nvidia.com \
--cc=peterx@redhat.com \
--cc=pstanner@redhat.com \
--cc=skolothumtho@nvidia.com \
--cc=targupta@nvidia.com \
--cc=vsethi@nvidia.com \
--cc=yi.l.liu@intel.com \
--cc=yishaih@nvidia.com \
--cc=zhangdongdong@eswincomputing.com \
--cc=zhiw@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox