public inbox for kvm@vger.kernel.org
 help / color / mirror / Atom feed
From: Kevin Cheng <chengkev@google.com>
To: seanjc@google.com, pbonzini@redhat.com
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	yosry.ahmed@linux.dev,  Kevin Cheng <chengkev@google.com>
Subject: [PATCH V2 4/5] KVM: SVM: Recalc instructions intercepts when EFER.SVME is toggled
Date: Mon, 12 Jan 2026 17:45:34 +0000	[thread overview]
Message-ID: <20260112174535.3132800-5-chengkev@google.com> (raw)
In-Reply-To: <20260112174535.3132800-1-chengkev@google.com>

The AMD APM states that VMRUN, VMLOAD, VMSAVE, CLGI, VMMCALL, and
INVLPGA instructions should generate a #UD when EFER.SVME is cleared.
Currently, when VMLOAD, VMSAVE, or CLGI are executed in L1 with
EFER.SVME cleared, no #UD is generated in certain cases. This is because
the intercepts for these instructions are cleared based on whether or
not vls or vgif is enabled. The #UD fails to be generated when the
intercepts are absent.

Fix the missing #UD generation by ensuring that all relevant
instructions have intercepts set when SVME.EFER is disabled.

VMMCALL is special because KVM's ABI is that VMCALL/VMMCALL are always
supported for L1 and never fault.

Signed-off-by: Kevin Cheng <chengkev@google.com>
---
 arch/x86/kvm/svm/svm.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 92a2faff1ccc8..92a66b62cfabd 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -243,6 +243,8 @@ int svm_set_efer(struct kvm_vcpu *vcpu, u64 efer)
 			if (svm_gp_erratum_intercept && !sev_guest(vcpu->kvm))
 				set_exception_intercept(svm, GP_VECTOR);
 		}
+
+		kvm_make_request(KVM_REQ_RECALC_INTERCEPTS, vcpu);
 	}
 
 	svm->vmcb->save.efer = efer | EFER_SVME;
@@ -976,6 +978,7 @@ void svm_write_tsc_multiplier(struct kvm_vcpu *vcpu)
 static void svm_recalc_instruction_intercepts(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
+	u64 efer = vcpu->arch.efer;
 
 	/*
 	 * Intercept INVPCID if shadow paging is enabled to sync/free shadow
@@ -996,7 +999,13 @@ static void svm_recalc_instruction_intercepts(struct kvm_vcpu *vcpu)
 			svm_set_intercept(svm, INTERCEPT_RDTSCP);
 	}
 
-	if (guest_cpuid_is_intel_compatible(vcpu)) {
+	/*
+	 * Intercept instructions that #UD if EFER.SVME=0, as SVME must be set even
+	 * when running the guest, i.e. hardware will only ever see EFER.SVME=1.
+	 */
+	if (guest_cpuid_is_intel_compatible(vcpu) || !(efer & EFER_SVME)) {
+		svm_set_intercept(svm, INTERCEPT_CLGI);
+		svm_set_intercept(svm, INTERCEPT_STGI);
 		svm_set_intercept(svm, INTERCEPT_VMLOAD);
 		svm_set_intercept(svm, INTERCEPT_VMSAVE);
 		svm->vmcb->control.virt_ext &= ~VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK;
-- 
2.52.0.457.g6b5491de43-goog


  parent reply	other threads:[~2026-01-12 17:45 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-12 17:45 [PATCH V2 0/5] Align SVM with APM defined behaviors Kevin Cheng
2026-01-12 17:45 ` [PATCH V2 1/5] KVM: SVM: Move STGI and CLGI intercept handling Kevin Cheng
2026-01-12 20:37   ` Yosry Ahmed
2026-01-15  1:39     ` Sean Christopherson
2026-01-15 16:41       ` Yosry Ahmed
2026-01-15 17:00         ` Sean Christopherson
2026-01-15 17:05           ` Yosry Ahmed
2026-01-15 17:29             ` Sean Christopherson
2026-01-22  4:59               ` Kevin Cheng
2026-01-12 17:45 ` [PATCH V2 2/5] KVM: SVM: Inject #UD for STGI if EFER.SVME=0 and SVM Lock and DEV are not available Kevin Cheng
2026-01-12 20:50   ` Yosry Ahmed
2026-01-22  5:02     ` Kevin Cheng
2026-01-12 17:45 ` [PATCH V2 3/5] KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0 Kevin Cheng
2026-01-12 20:51   ` Yosry Ahmed
2026-01-12 17:45 ` Kevin Cheng [this message]
2026-01-12 17:45 ` [PATCH V2 5/5] KVM: SVM: Raise #UD if VMMCALL instruction is not intercepted Kevin Cheng
2026-01-12 20:54   ` Yosry Ahmed
2026-01-14  5:20   ` Manali Shukla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260112174535.3132800-5-chengkev@google.com \
    --to=chengkev@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=yosry.ahmed@linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox