public inbox for kvm@vger.kernel.org
 help / color / mirror / Atom feed
From: "Kiryl Shutsemau (Meta)" <kas@kernel.org>
To: akpm@linux-foundation.org, rppt@kernel.org, peterx@redhat.com,
	david@kernel.org
Cc: ljs@kernel.org, surenb@google.com, vbabka@kernel.org,
	Liam.Howlett@oracle.com, ziy@nvidia.com, corbet@lwn.net,
	skhan@linuxfoundation.org, seanjc@google.com,
	pbonzini@redhat.com, jthoughton@google.com, aarcange@redhat.com,
	sj@kernel.org, usama.arif@linux.dev, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kselftest@vger.kernel.org, kvm@vger.kernel.org,
	kernel-team@meta.com, "Kiryl Shutsemau (Meta)" <kas@kernel.org>
Subject: [PATCH 14/14] Documentation/userfaultfd: document RWP working set tracking
Date: Mon, 27 Apr 2026 12:46:02 +0100	[thread overview]
Message-ID: <20260427114607.4068647-15-kas@kernel.org> (raw)
In-Reply-To: <20260427114607.4068647-1-kas@kernel.org>

Add an admin-guide section covering UFFDIO_REGISTER_MODE_RWP:

  - sync and async fault models;
  - UFFDIO_RWPROTECT semantics;
  - UFFD_FEATURE_RWP_ASYNC;
  - UFFDIO_SET_MODE runtime mode flips.

It also covers typical VMM working-set-tracking workflow from detection
loop through sync-mode eviction and back to async.

Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Assisted-by: Claude:claude-opus-4-6
---
 Documentation/admin-guide/mm/userfaultfd.rst | 201 ++++++++++++++++++-
 1 file changed, 195 insertions(+), 6 deletions(-)

diff --git a/Documentation/admin-guide/mm/userfaultfd.rst b/Documentation/admin-guide/mm/userfaultfd.rst
index 1e533639fd50..c6304ddcf238 100644
--- a/Documentation/admin-guide/mm/userfaultfd.rst
+++ b/Documentation/admin-guide/mm/userfaultfd.rst
@@ -275,16 +275,16 @@ tracking and it can be different in a few ways:
   - Dirty information will not get lost if the pte was zapped due to
     various reasons (e.g. during split of a shmem transparent huge page).
 
-  - Due to a reverted meaning of soft-dirty (page clean when uffd-wp bit
-    set; dirty when uffd-wp bit cleared), it has different semantics on
-    some of the memory operations.  For example: ``MADV_DONTNEED`` on
+  - Due to a reverted meaning of soft-dirty (page clean when the uffd bit
+    is set; dirty when the uffd bit is cleared), it has different semantics
+    on some of the memory operations.  For example: ``MADV_DONTNEED`` on
     anonymous (or ``MADV_REMOVE`` on a file mapping) will be treated as
-    dirtying of memory by dropping uffd-wp bit during the procedure.
+    dirtying of memory by dropping the uffd bit during the procedure.
 
 The user app can collect the "written/dirty" status by looking up the
-uffd-wp bit for the pages being interested in /proc/pagemap.
+uffd bit for the pages being interested in /proc/pagemap.
 
-The page will not be under track of uffd-wp async mode until the page is
+The page will not be under track of userfaultfd-wp async mode until the page is
 explicitly write-protected by ``ioctl(UFFDIO_WRITEPROTECT)`` with the mode
 flag ``UFFDIO_WRITEPROTECT_MODE_WP`` set.  Trying to resolve a page fault
 that was tracked by async mode userfaultfd-wp is invalid.
@@ -307,6 +307,195 @@ transparent to the guest, we want that same address range to act as if it was
 still poisoned, even though it's on a new physical host which ostensibly
 doesn't have a memory error in the exact same spot.
 
+Read-Write Protection
+---------------------
+
+``UFFDIO_REGISTER_MODE_RWP`` enables read-write protection tracking on a
+memory range. It is similar to (but faster than) ``mprotect(PROT_NONE)``
+combined with a signal handler; unlike ``mprotect(PROT_NONE)``, RWP only
+traps accesses to *present* PTEs, so accesses to unpopulated addresses in a
+protected range fall through to the normal missing-page path. It uses the
+PROT_NONE hinting mechanism (same as NUMA balancing) to make pages
+inaccessible while keeping them resident in memory. Works on anonymous,
+shmem, and hugetlbfs memory.
+
+This is designed for VM memory managers that need to track the working set
+of guest memory for cold page eviction to tiered or remote storage.
+
+**Setup:**
+
+1. Open a userfaultfd and enable ``UFFD_FEATURE_RWP`` via ``UFFDIO_API``.
+   Optionally request ``UFFD_FEATURE_RWP_ASYNC`` as well — it requires
+   ``UFFD_FEATURE_RWP`` to be set in the same ``UFFDIO_API`` call.
+
+2. Register the guest memory range with ``UFFDIO_REGISTER_MODE_RWP``
+   (and ``UFFDIO_REGISTER_MODE_MISSING`` if evicted pages will need to be
+   fetched back from storage).
+
+**Feature availability:**
+
+RWP is built on top of two kernel primitives: a spare PTE bit owned by
+userfaultfd (``CONFIG_HAVE_ARCH_USERFAULTFD_WP``) and arch support for
+present-but-inaccessible PTEs (``CONFIG_ARCH_HAS_PTE_PROTNONE``). When both
+are available on a 64-bit kernel, the build selects
+``CONFIG_USERFAULTFD_RWP=y`` and the ``VM_UFFD_RWP`` VMA flag becomes
+available.
+
+``UFFD_FEATURE_RWP`` and ``UFFD_FEATURE_RWP_ASYNC`` are masked out of the
+features returned by ``UFFDIO_API`` when the running kernel or architecture
+cannot support them — for example 32-bit kernels (where ``VM_UFFD_RWP`` is
+unavailable), kernels built without ``CONFIG_USERFAULTFD_RWP``, and
+architectures whose ptes cannot carry the uffd bit at runtime (e.g. riscv
+without the ``SVRSW60T59B`` extension). ``UFFDIO_API`` does not fail;
+unsupported bits are simply absent from ``uffdio_api.features`` on return.
+VMMs should inspect the returned ``features`` after ``UFFDIO_API`` and fall
+back to another tracking method when RWP is unavailable.
+
+**Protecting and Unprotecting:**
+
+Use ``UFFDIO_RWPROTECT`` to protect or unprotect a range, mirroring the
+``UFFDIO_WRITEPROTECT`` interface::
+
+    struct uffdio_rwprotect rwp = {
+        .range = { .start = addr, .len = len },
+        .mode = UFFDIO_RWPROTECT_MODE_RWP,  /* protect */
+    };
+    ioctl(uffd, UFFDIO_RWPROTECT, &rwp);
+
+Setting ``UFFDIO_RWPROTECT_MODE_RWP`` sets PROT_NONE on present PTEs in the
+range. Pages stay resident and their physical frames are preserved — only
+access permissions are removed.
+
+Clearing ``UFFDIO_RWPROTECT_MODE_RWP`` restores normal VMA permissions and
+wakes any faulting threads (unless ``UFFDIO_RWPROTECT_MODE_DONTWAKE`` is set).
+
+**Scope of protection:**
+
+RWP protection is a property of *present* PTEs. ``UFFDIO_RWPROTECT`` only
+affects entries that are already populated. Unpopulated addresses within
+the range remain unpopulated; when first accessed they fault through the
+normal missing path (``do_anonymous_page()``, ``do_swap_page()``,
+``finish_fault()``) and the resulting PTE is not RWP-protected. To observe
+the population itself, co-register the range with
+``UFFDIO_REGISTER_MODE_MISSING``.
+
+Protection is preserved across page reclaim: a page swapped out while
+RWP-protected carries the marker on its swap entry, and swap-in restores
+the PROT_NONE state so the first access after swap-in still faults. The
+same applies to pages temporarily replaced by migration entries.
+
+Operations that drop the PTE entirely — ``MADV_DONTNEED`` on anonymous
+memory, hole-punch on shmem, truncation of a file mapping — also drop the
+RWP marker: the next access re-populates the range without protection.
+Unlike WP (which persists via ``PTE_MARKER_UFFD_WP``), there is no
+persistent RWP marker today. The VMM needs to re-arm the range with
+``UFFDIO_RWPROTECT`` after any operation that explicitly frees PTEs.
+
+**Fault Handling:**
+
+When a protected page is accessed:
+
+- **Sync mode** (default): The faulting thread blocks and a
+  ``UFFD_PAGEFAULT_FLAG_RWP`` message is delivered to the userfaultfd
+  handler. The handler resolves the fault with ``UFFDIO_RWPROTECT``
+  (clearing ``MODE_RWP``), which restores the PTE permissions and wakes
+  the faulting thread.
+
+- **Async mode** (``UFFD_FEATURE_RWP_ASYNC``): The kernel automatically
+  restores PTE permissions and the thread continues without blocking. No
+  message is delivered to the handler.
+
+**Runtime Mode Switching:**
+
+``UFFDIO_SET_MODE`` toggles ``UFFD_FEATURE_RWP_ASYNC`` at runtime, allowing
+the VMM to switch between lightweight async detection and safe sync
+eviction without re-registering. The toggle takes ``mmap_write_lock()`` to
+ensure all in-flight faults complete before the mode change takes effect.
+
+**Cold Page Detection with PAGEMAP_SCAN:**
+
+RWP-protected PTEs carry the uffd PTE bit; the fault-resolution path
+clears it. ``PAGEMAP_SCAN`` reports ``PAGE_IS_ACCESSED`` once the bit is
+clear on a ``VM_UFFD_RWP`` VMA, so inverting it efficiently reports the
+still-protected (cold) pages::
+
+    struct pm_scan_arg arg = {
+        .size = sizeof(arg),
+        .start = guest_mem_start,
+        .end = guest_mem_end,
+        .vec = (uint64_t)regions,
+        .vec_len = regions_len,
+        .category_mask = PAGE_IS_ACCESSED,
+        .category_inverted = PAGE_IS_ACCESSED,
+        .return_mask = PAGE_IS_ACCESSED,
+    };
+    long n = ioctl(pagemap_fd, PAGEMAP_SCAN, &arg);
+
+The returned ``page_region`` array contains contiguous cold ranges that can
+then be evicted.
+
+**Cleanup:**
+
+When the userfaultfd is closed or the range is unregistered, all PROT_NONE
+PTEs are automatically restored to their normal VMA permissions. This
+prevents pages from becoming permanently inaccessible.
+
+**VMM Working Set Tracking Workflow:**
+
+A typical VMM lifecycle for cold page eviction to tiered storage::
+
+    /* One-time setup */
+    uffd = userfaultfd(O_CLOEXEC | O_NONBLOCK);
+    ioctl(uffd, UFFDIO_API, &(struct uffdio_api){
+        .api = UFFD_API,
+        .features = UFFD_FEATURE_RWP | UFFD_FEATURE_RWP_ASYNC,
+    });
+    ioctl(uffd, UFFDIO_REGISTER, &(struct uffdio_register){
+        .range = { guest_mem, guest_size },
+        .mode = UFFDIO_REGISTER_MODE_RWP |
+                UFFDIO_REGISTER_MODE_MISSING,
+    });
+
+    /* Tracking loop */
+    while (vm_running) {
+        /* 1. Detection phase (async — no vCPU stalls) */
+        ioctl(uffd, UFFDIO_RWPROTECT, &(struct uffdio_rwprotect){
+            .range = full_range,
+            .mode = UFFDIO_RWPROTECT_MODE_RWP });
+        sleep(tracking_interval);
+
+        /* 2. Find cold pages (uffd bit still set) */
+        ioctl(pagemap_fd, PAGEMAP_SCAN, &(struct pm_scan_arg){
+            .category_mask = PAGE_IS_ACCESSED,
+            .category_inverted = PAGE_IS_ACCESSED,
+            .return_mask = PAGE_IS_ACCESSED,
+            ...
+        });
+
+        /* 3. Switch to sync for safe eviction */
+        ioctl(uffd, UFFDIO_SET_MODE,
+              &(struct uffdio_set_mode){
+                  .disable = UFFD_FEATURE_RWP_ASYNC });
+
+        /* 4. Evict cold pages (vCPU faults block in handler) */
+        for each cold range:
+            pwrite(storage_fd, cold_addr, len, offset);
+            madvise(cold_addr, len, MADV_DONTNEED);
+
+        /* 5. Resume async tracking */
+        ioctl(uffd, UFFDIO_SET_MODE,
+              &(struct uffdio_set_mode){
+                  .enable = UFFD_FEATURE_RWP_ASYNC });
+    }
+
+During step 4, if a vCPU accesses a cold page being evicted, it blocks
+with a ``UFFD_PAGEFAULT_FLAG_RWP`` fault. The handler can either let it
+wait (the eviction completes, ``MADV_DONTNEED`` fires, the fault retries as
+``MISSING`` and is resolved with ``UFFDIO_COPY`` from storage) or unprotect
+it immediately with ``UFFDIO_RWPROTECT``.
+
+This workflow works identically for anonymous, shmem, and hugetlbfs memory.
+
 QEMU/KVM
 ========
 
-- 
2.51.2


      parent reply	other threads:[~2026-04-27 11:48 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-27 11:45 [PATCH 00/14] userfaultfd: working set tracking for VM guest memory Kiryl Shutsemau (Meta)
2026-04-27 11:45 ` [PATCH 01/14] mm: decouple protnone helpers from CONFIG_NUMA_BALANCING Kiryl Shutsemau (Meta)
2026-04-27 11:45 ` [PATCH 02/14] mm: rename uffd-wp PTE bit macros to uffd Kiryl Shutsemau (Meta)
2026-04-27 11:45 ` [PATCH 03/14] mm: rename uffd-wp PTE accessors " Kiryl Shutsemau (Meta)
2026-04-27 11:45 ` [PATCH 04/14] mm: add VM_UFFD_RWP VMA flag Kiryl Shutsemau (Meta)
2026-04-27 11:45 ` [PATCH 05/14] mm: add MM_CP_UFFD_RWP change_protection() flag Kiryl Shutsemau (Meta)
2026-04-27 11:45 ` [PATCH 06/14] mm: preserve RWP marker across PTE rewrites Kiryl Shutsemau (Meta)
2026-04-27 11:45 ` [PATCH 07/14] mm: handle VM_UFFD_RWP in khugepaged, rmap, and GUP Kiryl Shutsemau (Meta)
2026-04-27 11:45 ` [PATCH 08/14] userfaultfd: add UFFDIO_REGISTER_MODE_RWP and UFFDIO_RWPROTECT plumbing Kiryl Shutsemau (Meta)
2026-04-27 11:45 ` [PATCH 09/14] mm/userfaultfd: add RWP fault delivery and expose UFFDIO_REGISTER_MODE_RWP Kiryl Shutsemau (Meta)
2026-04-27 11:45 ` [PATCH 10/14] mm/pagemap: add PAGE_IS_ACCESSED for RWP tracking Kiryl Shutsemau (Meta)
2026-04-27 11:45 ` [PATCH 11/14] userfaultfd: add UFFD_FEATURE_RWP_ASYNC for async fault resolution Kiryl Shutsemau (Meta)
2026-04-27 11:46 ` [PATCH 12/14] userfaultfd: add UFFDIO_SET_MODE for runtime sync/async toggle Kiryl Shutsemau (Meta)
2026-04-27 11:46 ` [PATCH 13/14] selftests/mm: add userfaultfd RWP tests Kiryl Shutsemau (Meta)
2026-04-27 11:46 ` Kiryl Shutsemau (Meta) [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260427114607.4068647-15-kas@kernel.org \
    --to=kas@kernel.org \
    --cc=Liam.Howlett@oracle.com \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=corbet@lwn.net \
    --cc=david@kernel.org \
    --cc=jthoughton@google.com \
    --cc=kernel-team@meta.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ljs@kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=peterx@redhat.com \
    --cc=rppt@kernel.org \
    --cc=seanjc@google.com \
    --cc=sj@kernel.org \
    --cc=skhan@linuxfoundation.org \
    --cc=surenb@google.com \
    --cc=usama.arif@linux.dev \
    --cc=vbabka@kernel.org \
    --cc=ziy@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox