Re: unhandled vm exit: 0x80000021 vcpu_id 0

["p.quida@tiscali.it" <p.quida@tiscali.it>]

[-- Attachment #1: Type: text/plain, Size: 3259 bytes --]


Hi,
I understand the "particularity" (checkpoint) of this case.

Any way, in the attachment the dmesg log and the output of the dmesg 
command.

thanks for your helpfulness.

Regards.

Sheng Yang wrote:
> On Mon, Sep 29, 2008 at 6:18 PM, p.quida@tiscali.it <p.quida@tiscali.
it> wrote:
>   
>> Hi,
>> I have successfully installed windows XP SP2 on kvm. After the
>> installation I have launched the setup of  "Checkpoint - Pointsec" 
for
>> the entire disk encryption.
>>     
>
> Hi Pier
>
> Can you issue a bug for this? But sadly "Checkpoint" is a commercial
> software, we may not deal with it directly and immediately.
>
>   
>> The first step of installation was run successfully, but when the
>> system reboots and "Pointsec" loads the initial code, the following
>> error happens:
>> 
======================================================================================
>> unhandled vm exit: 0x80000021 vcpu_id 0
>> rax 0000000000000007 rbx 0000000000001490 rcx 0000000000000000 rdx
>> 00000000000019a0
>> rsi 0000000000000000 rdi 0000000000000000 rsp 0000000000000080 rbp
>> 00000000000096bf
>> r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11
>> 0000000000000000
>> r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15
>> 0000000000000000
>> rip 000000000000002a rflags 00023202
>> cs 14a2 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 9 l 0 g 0 avl 0)
>> ds 19a0 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 0 l 0 g 0 avl 0)
>> es 1a31 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 0 l 0 g 0 avl 0)
>> ss 1a29 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 1 l 0 g 0 avl 0)
>> fs 0000 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 0 l 0 g 0 avl 0)
>> gs 0000 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 0 l 0 g 0 avl 0)
>> tr 0058 (00201ffa/0000ffff p 1 dpl 0 db 0 s 0 type b l 0 g 0 avl 0)
>> ldt 0000 (00000000/00000000 p 0 dpl 0 db 0 s 0 type 0 l 0 g 0 avl 
0)
>> gdt 200000/1dd8
>> idt 201df0/188
>> cr0 80000019 cr2 0 cr3 1440000 cr4 0 cr8 0 efer 0
>>     
>
> What's this... CR0.PE clear, CR0.PG set... And segment register also
> strange. May be some real emulation wrong...
>
>   
>> Aborted
>> 
======================================================================================
>> I am able to boot this system (image) using qemu (with kqemu 
enabled
>> for user code), but not using kvm.
>> I have also tried with the options: -no-kvm-irqchip -no-kvm-pit -
no-
>> acpi without success. Only the -no-kvm option works.
>> I have tried these kvm releases: from 65 to 76; and these kernel
>> (vanilla) releases: from 2.6.23.1 to 2.6.26.5.
>>     
>
> Thanks for your patient...
>   
>> My computer is a Dell D630 equipped with Intel(R) Core(TM)2 Duo CPU
>> T7300  @ 2.00GHz
>> The HOST Linux distributions used are: Fedora 8/9 for i386, and 
Fedora
>> 9 for x86_64.
>>     
>
> Can you show dmesg as well? That's also helps.
>
>   







_______________________________________________________________

Con Tiscali Adsl 8 Mega navighi SENZA LIMITI e GRATIS PER I PRIMI TRE MESI. In seguito paghi solo € 19,95 al mese. Attivala subito, l?offerta è valida fino al 02/10/2008! http://abbonati.tiscali.it/promo/adsl8mega/

[-- Attachment #2: dmesg.tgz --]
[-- Type: APPLICATION/X-GZIP, Size: 11481 bytes --]