From: Janosch Frank <frankja@linux.ibm.com>
To: Pierre Morel <pmorel@linux.ibm.com>, kvm@vger.kernel.org
Cc: linux-s390@vger.kernel.org, linux-kernel@vger.kernel.org,
borntraeger@de.ibm.com, cohuck@redhat.com, david@redhat.com,
thuth@redhat.com, imbrenda@linux.ibm.com, hca@linux.ibm.com,
gor@linux.ibm.com, wintera@linux.ibm.com, seiden@linux.ibm.com,
nrb@linux.ibm.com, scgl@linux.ibm.com
Subject: Re: [PATCH v11 2/3] KVM: s390: guest support for topology function
Date: Mon, 4 Jul 2022 10:46:08 +0200 [thread overview]
Message-ID: <3fe672a0-be10-37de-3bcb-6505e7adda3f@linux.ibm.com> (raw)
In-Reply-To: <20220701162559.158313-3-pmorel@linux.ibm.com>
On 7/1/22 18:25, Pierre Morel wrote:
> We report a topology change to the guest for any CPU hotplug.
>
> The reporting to the guest is done using the Multiprocessor
> Topology-Change-Report (MTCR) bit of the utility entry in the guest's
> SCA which will be cleared during the interpretation of PTF.
>
> On every vCPU creation we set the MCTR bit to let the guest know the
> next time he uses the PTF with command 2 instruction that the
> topology changed and that he should use the STSI(15.1.x) instruction
> to get the topology details.
>
> STSI(15.1.x) gives information on the CPU configuration topology.
> Let's accept the interception of STSI with the function code 15 and
> let the userland part of the hypervisor handle it when userland
> support the CPU Topology facility.
>
> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
> Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
> ---
> arch/s390/include/asm/kvm_host.h | 18 +++++++++++++---
> arch/s390/kvm/kvm-s390.c | 36 ++++++++++++++++++++++++++++++++
> arch/s390/kvm/priv.c | 16 ++++++++++----
> arch/s390/kvm/vsie.c | 8 +++++++
> 4 files changed, 71 insertions(+), 7 deletions(-)
>
> diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
> index 766028d54a3e..ae6bd3d607de 100644
> --- a/arch/s390/include/asm/kvm_host.h
> +++ b/arch/s390/include/asm/kvm_host.h
> @@ -93,19 +93,30 @@ union ipte_control {
> };
> };
>
> +union sca_utility {
> + __u16 val;
> + struct {
> + __u16 mtcr : 1;
> + __u16 reserved : 15;
> + };
> +};
> +
> struct bsca_block {
> union ipte_control ipte_control;
> __u64 reserved[5];
> __u64 mcn;
> - __u64 reserved2;
> + union sca_utility utility;
> + __u8 reserved2[6];
> struct bsca_entry cpu[KVM_S390_BSCA_CPU_SLOTS];
> };
>
> struct esca_block {
> union ipte_control ipte_control;
> - __u64 reserved1[7];
> + __u64 reserved1[6];
> + union sca_utility utility;
> + __u8 reserved2[6];
> __u64 mcn[4];
> - __u64 reserved2[20];
> + __u64 reserved3[20];
> struct esca_entry cpu[KVM_S390_ESCA_CPU_SLOTS];
> };
>
> @@ -249,6 +260,7 @@ struct kvm_s390_sie_block {
> #define ECB_SPECI 0x08
> #define ECB_SRSI 0x04
> #define ECB_HOSTPROTINT 0x02
> +#define ECB_PTF 0x01
> __u8 ecb; /* 0x0061 */
> #define ECB2_CMMA 0x80
> #define ECB2_IEP 0x20
> diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
> index 8fcb56141689..ee59b03f2e45 100644
> --- a/arch/s390/kvm/kvm-s390.c
> +++ b/arch/s390/kvm/kvm-s390.c
> @@ -1691,6 +1691,31 @@ static int kvm_s390_get_cpu_model(struct kvm *kvm, struct kvm_device_attr *attr)
> return ret;
> }
>
> +/**
> + * kvm_s390_update_topology_change_report - update CPU topology change report
> + * @kvm: guest KVM description
> + * @val: set or clear the MTCR bit
> + *
> + * Updates the Multiprocessor Topology-Change-Report bit to signal
> + * the guest with a topology change.
> + * This is only relevant if the topology facility is present.
> + *
> + * The SCA version, bsca or esca, doesn't matter as offset is the same.
> + */
> +static void kvm_s390_update_topology_change_report(struct kvm *kvm, bool val)
> +{
> + struct bsca_block *sca = kvm->arch.sca;
> + union sca_utility new, old;
> +
> + read_lock(&kvm->arch.sca_lock);
> + do {
> + old = READ_ONCE(sca->utility);
> + new = old;
> + new.mtcr = val;
> + } while (cmpxchg(&sca->utility.val, old.val, new.val) != old.val);
> + read_unlock(&kvm->arch.sca_lock);
> +}
> +
> static int kvm_s390_vm_set_attr(struct kvm *kvm, struct kvm_device_attr *attr)
> {
> int ret;
> @@ -2877,6 +2902,7 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
> kvm_clear_async_pf_completion_queue(vcpu);
> if (!kvm_is_ucontrol(vcpu->kvm))
> sca_del_vcpu(vcpu);
> + kvm_s390_update_topology_change_report(vcpu->kvm, 1);
>
> if (kvm_is_ucontrol(vcpu->kvm))
> gmap_remove(vcpu->arch.gmap);
> @@ -3272,6 +3298,14 @@ static int kvm_s390_vcpu_setup(struct kvm_vcpu *vcpu)
> vcpu->arch.sie_block->ecb |= ECB_HOSTPROTINT;
> if (test_kvm_facility(vcpu->kvm, 9))
> vcpu->arch.sie_block->ecb |= ECB_SRSI;
> + /*
> + * CPU Topology
> + * This facility only uses the utility field of the SCA and none
> + * of the cpu entries that are problematic with the other
> + * interpretation facilities so we can pass it through.
> + */
> + if (test_kvm_facility(vcpu->kvm, 11))
> + vcpu->arch.sie_block->ecb |= ECB_PTF;
> if (test_kvm_facility(vcpu->kvm, 73))
> vcpu->arch.sie_block->ecb |= ECB_TE;
> if (!kvm_is_ucontrol(vcpu->kvm))
> @@ -3403,6 +3437,8 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
> rc = kvm_s390_vcpu_setup(vcpu);
> if (rc)
> goto out_ucontrol_uninit;
> +
> + kvm_s390_update_topology_change_report(vcpu->kvm, 1);
> return 0;
>
> out_ucontrol_uninit:
> diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
> index 12c464c7cddf..046afee1be94 100644
> --- a/arch/s390/kvm/priv.c
> +++ b/arch/s390/kvm/priv.c
> @@ -873,10 +873,13 @@ static int handle_stsi(struct kvm_vcpu *vcpu)
> if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
> return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
>
> - if (fc > 3) {
> - kvm_s390_set_psw_cc(vcpu, 3);
> - return 0;
> - }
> + /* Bailout forbidden function codes */
> + if (fc > 3 && (fc != 15 || kvm_s390_pv_cpu_is_protected(vcpu)))
> + goto out_no_data;
> +
> + /* fc 15 is provided with PTF/CPU topology support */
> + if (fc == 15 && !test_kvm_facility(vcpu->kvm, 11))
> + goto out_no_data;
>
> if (vcpu->run->s.regs.gprs[0] & 0x0fffff00
> || vcpu->run->s.regs.gprs[1] & 0xffff0000)
> @@ -910,6 +913,11 @@ static int handle_stsi(struct kvm_vcpu *vcpu)
> goto out_no_data;
> handle_stsi_3_2_2(vcpu, (void *) mem);
> break;
> + case 15: /* fc 15 is fully handled in userspace */
> + if (vcpu->kvm->arch.user_stsi)
> + insert_stsi_usr_data(vcpu, operand2, ar, fc, sel1, sel2);
> + trace_kvm_s390_handle_stsi(vcpu, fc, sel1, sel2, operand2);
> + return -EREMOTE;
> }
> if (kvm_s390_pv_cpu_is_protected(vcpu)) {
> memcpy((void *)sida_origin(vcpu->arch.sie_block), (void *)mem,
> diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
> index dada78b92691..94138f8f0c1c 100644
> --- a/arch/s390/kvm/vsie.c
> +++ b/arch/s390/kvm/vsie.c
> @@ -503,6 +503,14 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
> /* Host-protection-interruption introduced with ESOP */
> if (test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_ESOP))
> scb_s->ecb |= scb_o->ecb & ECB_HOSTPROTINT;
> + /*
> + * CPU Topology
> + * This facility only uses the utility field of the SCA and none of
> + * the cpu entries that are problematic with the other interpretation
> + * facilities so we can pass it through
> + */
> + if (test_kvm_facility(vcpu->kvm, 11))
> + scb_s->ecb |= scb_o->ecb & ECB_PTF;
> /* transactional execution */
> if (test_kvm_facility(vcpu->kvm, 73) && wants_tx) {
> /* remap the prefix is tx is toggled on */
next prev parent reply other threads:[~2022-07-04 8:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-01 16:25 [PATCH v11 0/3] s390x: KVM: CPU Topology Pierre Morel
2022-07-01 16:25 ` [PATCH v11 1/3] KVM: s390: Cleanup ipte lock access and SIIF facility checks Pierre Morel
2022-07-01 16:25 ` [PATCH v11 2/3] KVM: s390: guest support for topology function Pierre Morel
2022-07-04 8:46 ` Janosch Frank [this message]
2022-07-04 9:08 ` Janis Schoetterl-Glausch
2022-07-04 9:14 ` Janis Schoetterl-Glausch
2022-07-04 11:02 ` Pierre Morel
2022-07-04 11:17 ` Janosch Frank
2022-07-04 13:51 ` Pierre Morel
2022-07-04 13:54 ` Pierre Morel
2022-07-01 16:25 ` [PATCH v11 3/3] KVM: s390: resetting the Topology-Change-Report Pierre Morel
2022-07-04 9:35 ` Janis Schoetterl-Glausch
2022-07-04 13:56 ` Pierre Morel
2022-07-05 8:09 ` Janis Schoetterl-Glausch
2022-07-05 12:38 ` Pierre Morel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3fe672a0-be10-37de-3bcb-6505e7adda3f@linux.ibm.com \
--to=frankja@linux.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=nrb@linux.ibm.com \
--cc=pmorel@linux.ibm.com \
--cc=scgl@linux.ibm.com \
--cc=seiden@linux.ibm.com \
--cc=thuth@redhat.com \
--cc=wintera@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox