Windows XP internal Power error

Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

Good morning,
I installed kvm on an intel machine with intel virtualization support.
My machine runs linux FC6 and I am able to run xen with windows xp 
guests (so I think intel virtualization works fine).
If I try to use kvm version 7, I am able to install Windows with 
no-acpi option.
At the first boot (when Windows Xp tries to complete the installation) 
a blue screen apperas:
INTERNAL_POWER_ERROR


Could anyone help me ?


Thanks & Regards
Igna


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Dor Laor]

> Good morning,
> I installed kvm on an intel machine with intel virtualization support.
> My machine runs linux FC6 and I am able to run xen with windows xp
> guests (so I think intel virtualization works fine).
> If I try to use kvm version 7, I am able to install Windows with
> no-acpi option.
> At the first boot (when Windows Xp tries to complete the installation)
> a blue screen apperas:
> INTERNAL_POWER_ERROR

It's a missing feature we have regarding unsupported restart.
You can just kill the qemu and run it again with -boot c option.
The installation will continue from the same point and might even reboot
again. At the end you'll have windows working :) ...

The problem will be addressed soon.
> 
> 
> Could anyone help me ?
> 
> 
> Thanks & Regards
> Igna
> 
> 
>
------------------------------------------------------------------------
-
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to
share
> your
> opinions on IT & business topics through brief surveys - and earn cash
>
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
> _______________________________________________
> kvm-devel mailing list
> kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/kvm-devel

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

Good moorning, I changed the -boot option in 'c' but when my Windows Xp boot
to complete the installation I got the following errors:

unhandled vm exit:  0x80000022
rax 0000000000000800 rbx 00000000ffdff120 rcx 00000000c0000080 rdx 
0000000000000000
rsi 0000000000000000 rdi 00000000c0000080 rsp 0000000080548de8 rbp 
0000000080548e3c
r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11 
0000000000000000
r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 
0000000000000000
rip 00000000804fee82 rflags 00000006


I compiled kvm 7 on fedora core 6 witg gcc 4.

Thanks
Igna

----- Messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Wed, 13 Dec 2006 08:47:33 -0800
    Da: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: RE: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org, kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


>
>> Good morning,
>> I installed kvm on an intel machine with intel virtualization support.
>> My machine runs linux FC6 and I am able to run xen with windows xp
>> guests (so I think intel virtualization works fine).
>> If I try to use kvm version 7, I am able to install Windows with
>> no-acpi option.
>> At the first boot (when Windows Xp tries to complete the installation)
>> a blue screen apperas:
>> INTERNAL_POWER_ERROR
>
> It's a missing feature we have regarding unsupported restart.
> You can just kill the qemu and run it again with -boot c option.
> The installation will continue from the same point and might even reboot
> again. At the end you'll have windows working :) ...
>
> The problem will be addressed soon.
>>
>>
>> Could anyone help me ?
>>
>>
>> Thanks & Regards
>> Igna
>>
>>
>>
> ------------------------------------------------------------------------
> -
>> Take Surveys. Earn Cash. Influence the Future of IT
>> Join SourceForge.net's Techsay panel and you'll get the chance to
> share
>> your
>> opinions on IT & business topics through brief surveys - and earn cash
>>
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
> V
>> _______________________________________________
>> kvm-devel mailing list
>> kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
>> https://lists.sourceforge.net/lists/listinfo/kvm-devel
>


----- Fine messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Avi Kivity]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
> Good moorning, I changed the -boot option in 'c' but when my Windows Xp boot
> to complete the installation I got the following errors:
>
> unhandled vm exit:  0x80000022
> rax 0000000000000800 rbx 00000000ffdff120 rcx 00000000c0000080 rdx 
> 0000000000000000
> rsi 0000000000000000 rdi 00000000c0000080 rsp 0000000080548de8 rbp 
> 0000000080548e3c
> r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11 
> 0000000000000000
> r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 
> 0000000000000000
> rip 00000000804fee82 rflags 00000006
>
>
> I compiled kvm 7 on fedora core 6 witg gcc 4.
>   

What is your cpu model?

-- 
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Dor Laor]

[-- Attachment #1: Type: text/plain, Size: 1039 bytes --]


 
> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
> > Good moorning, I changed the -boot option in 'c' but when my Windows
Xp
> boot
> > to complete the installation I got the following errors:
> >
> > unhandled vm exit:  0x80000022
> > rax 0000000000000800 rbx 00000000ffdff120 rcx 00000000c0000080 rdx
> > 0000000000000000
> > rsi 0000000000000000 rdi 00000000c0000080 rsp 0000000080548de8 rbp
> > 0000000080548e3c
> > r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11
> > 0000000000000000
> > r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15
> > 0000000000000000
> > rip 00000000804fee82 rflags 00000006
> >

The vmexit reason is due to vm entry failure because of bad MSR load.
Attached is a patch for you that print the MSR content.
Please run it and send the last dmesg prints.

> >
> > I compiled kvm 7 on fedora core 6 witg gcc 4.
> >
> 
> What is your cpu model?
> 
> --
> error compiling committee.c: too many arguments to function


[-- Attachment #2: msr.patch --]
[-- Type: application/octet-stream, Size: 532 bytes --]

Index: kernel/vmx.c
===================================================================
--- kernel/vmx.c	(revision 4109)
+++ kernel/vmx.c	(working copy)
@@ -1723,6 +1723,13 @@
 	save_msrs(vcpu->host_msrs, vcpu->nmsrs);
 	load_msrs(vcpu->guest_msrs, NR_BAD_MSRS);
 
+	{int i;
+	 struct vmx_msr_entry *msr = vcpu->guest_msrs;
+		for (i=0;i<vcpu->nmsrs - NR_BAD_MSRS;i++, msr++) {
+			printk(KERN_EMERG "VMentry msr[%d] index=%x data=%llx\n", i, msr->index, msr->data);
+		}
+	}
+
 	asm (
 		/* Store host registers */
 		"pushf \n\t"

[-- Attachment #3: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

My cpu model is :
Intel(R) Pentium(R) D CPU 3.60GHz


----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Thu, 14 Dec 2006 11:26:48 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>, kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>> Good moorning, I changed the -boot option in 'c' but when my Windows Xp boot
>> to complete the installation I got the following errors:
>>
>> unhandled vm exit:  0x80000022
>> rax 0000000000000800 rbx 00000000ffdff120 rcx 00000000c0000080 rdx 
>> 0000000000000000
>> rsi 0000000000000000 rdi 00000000c0000080 rsp 0000000080548de8 rbp 
>> 0000000080548e3c
>> r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11 
>> 0000000000000000
>> r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 
>> 0000000000000000
>> rip 00000000804fee82 rflags 00000006
>>
>>
>> I compiled kvm 7 on fedora core 6 witg gcc 4.
>>
>
> What is your cpu model?
>
> -- 
> error compiling committee.c: too many arguments to function
>
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Avi Kivity]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>
> My cpu model is :
> Intel(R) Pentium(R) D CPU 3.60GHz
>

I have a Intel(R) Pentium(R) D CPU 3.00GHz on one of my boxes.  Strange.

-- 
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

[-- Attachment #1: Type: text/plain, Size: 1720 bytes --]

I applyed the patch.
Attacched here there is the dmesg output.
Thanks



----- Messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Thu, 14 Dec 2006 01:42:49 -0800
    Da: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: RE: [kvm-devel] Windows XP internal Power error
      A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>, ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


>
>
>> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>> > Good moorning, I changed the -boot option in 'c' but when my Windows
> Xp
>> boot
>> > to complete the installation I got the following errors:
>> >
>> > unhandled vm exit:  0x80000022
>> > rax 0000000000000800 rbx 00000000ffdff120 rcx 00000000c0000080 rdx
>> > 0000000000000000
>> > rsi 0000000000000000 rdi 00000000c0000080 rsp 0000000080548de8 rbp
>> > 0000000080548e3c
>> > r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11
>> > 0000000000000000
>> > r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15
>> > 0000000000000000
>> > rip 00000000804fee82 rflags 00000006
>> >
>
> The vmexit reason is due to vm entry failure because of bad MSR load.
> Attached is a patch for you that print the MSR content.
> Please run it and send the last dmesg prints.
>
>> >
>> > I compiled kvm 7 on fedora core 6 witg gcc 4.
>> >
>>
>> What is your cpu model?
>>
>> --
>> error compiling committee.c: too many arguments to function
>
>


----- Fine messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----



[-- Attachment #2: dmesg.gz --]
[-- Type: application/x-gzip, Size: 603 bytes --]

[-- Attachment #3: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[Avi Kivity]

[-- Attachment #1: Type: text/plain, Size: 334 bytes --]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
> I applyed the patch.
> Attacched here there is the dmesg output.

Please run the attached program and report output.

Before you run it, run 'modprobe msr' and check you have a /dev/cpu/0/msr.

-- 
error compiling committee.c: too many arguments to function


[-- Attachment #2: check_msr.c --]
[-- Type: text/x-csrc, Size: 1053 bytes --]

#define _FILE_OFFSET_BITS 64

#include <stdio.h>
#include <unistd.h>
#include <fcntl.h>
#include <stdint.h>
#include <stdlib.h>
#include <sys/types.h>

void check_msr(int fd, uint32_t msr)
{
    uint64_t val;

    if (lseek(fd, msr, SEEK_SET) == (off_t)-1) {
	printf("see to msr %08x failed: %m\n", msr);
	return;
    }
    if (read(fd, &val, 8) == -1) {
	printf("%08x: cannot read\n", msr);
	return;
    }
    if (lseek(fd, msr, SEEK_SET) == (off_t)-1) {
	printf("see to msr %08x failed: %m\n", msr);
	return;
    }
    if (write(fd, &val, 8) == -1) {
	printf("%08x: cannot write\n", msr);
	return;
    }
    printf("%08x: may read and write\n", msr);
}

int main(int ac, char **av)
{
    int r, fd;

    r = open("/dev/cpu/0/msr", O_RDWR);
    if (r == -1) {
	printf("cannot open /dev/cpu/0/msr: %m\n");
	exit(1);
    }
    fd = r;
    check_msr(fd, 0xc0000080);
    check_msr(fd, 0xc0000081);
    check_msr(fd, 0xc0000082);
    check_msr(fd, 0xc0000083);
    check_msr(fd, 0xc0000084);
    check_msr(fd, 0xc0000102);
    check_msr(fd, 0x12345678);
}

[-- Attachment #3: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

I compiled check_msr.
I did not find a msr module to load but I found /dev/cpu/0/msr.
Any case runnig check_msr I got the following:
c0000080: may read and write
c0000081: may read and write
c0000082: may read and write
c0000083: may read and write
c0000084: may read and write
c0000102: may read and write
12345678: cannot read



----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Thu, 14 Dec 2006 13:35:51 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>, kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>> I applyed the patch.
>> Attacched here there is the dmesg output.
>
> Please run the attached program and report output.
>
> Before you run it, run 'modprobe msr' and check you have a /dev/cpu/0/msr.
>
> -- 
> error compiling committee.c: too many arguments to function
>
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Dor Laor]

[-- Attachment #1: Type: text/plain, Size: 1558 bytes --]

> 
> 
> I compiled check_msr.
> I did not find a msr module to load but I found /dev/cpu/0/msr.
> Any case runnig check_msr I got the following:
> c0000080: may read and write
> c0000081: may read and write
> c0000082: may read and write
> c0000083: may read and write

Looks like the msr does exist on Intel.
The attached patch prints the host & guest msrs on the specific failure.
Let's see what it provides..

> c0000084: may read and write
> c0000102: may read and write
> 12345678: cannot read
> 
> 
> 
> ----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
>     Data: Thu, 14 Dec 2006 13:35:51 +0200
>     Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
> Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
> Oggetto: Re: [kvm-devel] Windows XP internal Power error
>       A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
>       Cc: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>, kvm-
> devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> 
> 
> > ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
> >> I applyed the patch.
> >> Attacched here there is the dmesg output.
> >
> > Please run the attached program and report output.
> >
> > Before you run it, run 'modprobe msr' and check you have a
> /dev/cpu/0/msr.
> >
> > --
> > error compiling committee.c: too many arguments to function
> >
> >
> 
> 
> ----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----
> 
> 


[-- Attachment #2: msr.patch --]
[-- Type: application/octet-stream, Size: 786 bytes --]

Index: kernel/vmx.c
===================================================================
--- kernel/vmx.c	(revision 4109)
+++ kernel/vmx.c	(working copy)
@@ -1844,6 +1844,21 @@
 
 	++kvm_stat.exits;
 
+	{
+		int i;
+		struct vmx_msr_entry *gmsr = vcpu->guest_msrs;
+		struct vmx_msr_entry *hmsr = vcpu->host_msrs;
+
+		if (fail && (vmcs_read32(VM_EXIT_REASON) == 0x80000022)) {
+			for (i=0;i<vcpu->nmsrs - NR_BAD_MSRS;i++, gmsr++) 
+				printk(KERN_EMERG "VMentry guest msr[%d] index=%x data=%llx\n", i, gmsr->index, gmsr->data);
+
+			for (i=0;i<vcpu->nmsrs - NR_BAD_MSRS;i++, hmsr++) 
+				printk(KERN_EMERG "VMentry host msr[%d] index=%x data=%llx\n", i, hmsr->index, hmsr->data);
+		}
+	}
+
+
 	save_msrs(vcpu->guest_msrs, NR_BAD_MSRS);
 	load_msrs(vcpu->host_msrs, NR_BAD_MSRS);
 

[-- Attachment #3: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

[-- Attachment #1: Type: text/plain, Size: 2241 bytes --]


Applayed your patch and launched the windows xp boot.
Dmesg is attacched here.



----- Messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Thu, 14 Dec 2006 05:41:23 -0800
    Da: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org, Avi Kivity <avik-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


>>
>>
>> I compiled check_msr.
>> I did not find a msr module to load but I found /dev/cpu/0/msr.
>> Any case runnig check_msr I got the following:
>> c0000080: may read and write
>> c0000081: may read and write
>> c0000082: may read and write
>> c0000083: may read and write
>
> Looks like the msr does exist on Intel.
> The attached patch prints the host & guest msrs on the specific failure.
> Let's see what it provides..
>
>> c0000084: may read and write
>> c0000102: may read and write
>> 12345678: cannot read
>>
>>
>>
>> ----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
>>     Data: Thu, 14 Dec 2006 13:35:51 +0200
>>     Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
>> Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
>> Oggetto: Re: [kvm-devel] Windows XP internal Power error
>>       A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
>>       Cc: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>, kvm-
>> devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
>>
>>
>> > ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>> >> I applyed the patch.
>> >> Attacched here there is the dmesg output.
>> >
>> > Please run the attached program and report output.
>> >
>> > Before you run it, run 'modprobe msr' and check you have a
>> /dev/cpu/0/msr.
>> >
>> > --
>> > error compiling committee.c: too many arguments to function
>> >
>> >
>>
>>
>> ----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----
>>
>>
>
>


----- Fine messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----



[-- Attachment #2: dmesg.gz --]
[-- Type: application/x-gzip, Size: 603 bytes --]

[-- Attachment #3: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[Dor Laor]

> 
> Applayed your patch and launched the windows xp boot.
> Dmesg is attacched here.
> 
> 

It's no good, I didn't tell you to rewind the first patch and leave only
the later one.
It should print the msrs only on the erroneous vmexit and provide the
host & guest msrs.

> 
> ----- Messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
>     Data: Thu, 14 Dec 2006 05:41:23 -0800
>     Da: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
> Rispondi-A: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
> Oggetto: Re: [kvm-devel] Windows XP internal Power error
>       A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org, Avi Kivity
> <avik-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
>       Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> 
> 
> >>
> >>
> >> I compiled check_msr.
> >> I did not find a msr module to load but I found /dev/cpu/0/msr.
> >> Any case runnig check_msr I got the following:
> >> c0000080: may read and write
> >> c0000081: may read and write
> >> c0000082: may read and write
> >> c0000083: may read and write
> >
> > Looks like the msr does exist on Intel.
> > The attached patch prints the host & guest msrs on the specific
failure.
> > Let's see what it provides..
> >
> >> c0000084: may read and write
> >> c0000102: may read and write
> >> 12345678: cannot read
> >>
> >>
> >>
> >> ----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
> >>     Data: Thu, 14 Dec 2006 13:35:51 +0200
> >>     Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
> >> Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
> >> Oggetto: Re: [kvm-devel] Windows XP internal Power error
> >>       A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
> >>       Cc: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>, kvm-
> >> devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> >>
> >>
> >> > ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
> >> >> I applyed the patch.
> >> >> Attacched here there is the dmesg output.
> >> >
> >> > Please run the attached program and report output.
> >> >
> >> > Before you run it, run 'modprobe msr' and check you have a
> >> /dev/cpu/0/msr.
> >> >
> >> > --
> >> > error compiling committee.c: too many arguments to function
> >> >
> >> >
> >>
> >>
> >> ----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----
> >>
> >>
> >
> >
> 
> 
> ----- Fine messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----
> 


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

I did not understand ... sorry.
Let me to explain what I am doing...

modprobe -r kvm-intel
cd kvm-7
patch kernel/vmx.c your_first_patch_file
pacth kernel/vmx.c your_second_patch_file
make
make install
modprobe -r kvm-intel

Then I lauch the winxp boot.

Is it correct ?


----- Messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Thu, 14 Dec 2006 06:09:32 -0800
    Da: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, Avi Kivity <avik-atKUWr5tajBWk0Htik3J/w@public.gmane.org>


>>
>> Applayed your patch and launched the windows xp boot.
>> Dmesg is attacched here.
>>
>>
>
> It's no good, I didn't tell you to rewind the first patch and leave only
> the later one.
> It should print the msrs only on the erroneous vmexit and provide the
> host & guest msrs.
>
>>
>> ----- Messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
>>     Data: Thu, 14 Dec 2006 05:41:23 -0800
>>     Da: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
>> Rispondi-A: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
>> Oggetto: Re: [kvm-devel] Windows XP internal Power error
>>       A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org, Avi Kivity
>> <avik-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
>>       Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
>>
>>
>> >>
>> >>
>> >> I compiled check_msr.
>> >> I did not find a msr module to load but I found /dev/cpu/0/msr.
>> >> Any case runnig check_msr I got the following:
>> >> c0000080: may read and write
>> >> c0000081: may read and write
>> >> c0000082: may read and write
>> >> c0000083: may read and write
>> >
>> > Looks like the msr does exist on Intel.
>> > The attached patch prints the host & guest msrs on the specific
> failure.
>> > Let's see what it provides..
>> >
>> >> c0000084: may read and write
>> >> c0000102: may read and write
>> >> 12345678: cannot read
>> >>
>> >>
>> >>
>> >> ----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
>> >>     Data: Thu, 14 Dec 2006 13:35:51 +0200
>> >>     Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
>> >> Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
>> >> Oggetto: Re: [kvm-devel] Windows XP internal Power error
>> >>       A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
>> >>       Cc: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>, kvm-
>> >> devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
>> >>
>> >>
>> >> > ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>> >> >> I applyed the patch.
>> >> >> Attacched here there is the dmesg output.
>> >> >
>> >> > Please run the attached program and report output.
>> >> >
>> >> > Before you run it, run 'modprobe msr' and check you have a
>> >> /dev/cpu/0/msr.
>> >> >
>> >> > --
>> >> > error compiling committee.c: too many arguments to function
>> >> >
>> >> >
>> >>
>> >>
>> >> ----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----
>> >>
>> >>
>> >
>> >
>>
>>
>> ----- Fine messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----
>>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> kvm-devel mailing list
> kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/kvm-devel
>


----- Fine messaggio da dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Avi Kivity]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>
> I did not understand ... sorry.
> Let me to explain what I am doing...
>
> modprobe -r kvm-intel
> cd kvm-7
> patch kernel/vmx.c your_first_patch_file
> pacth kernel/vmx.c your_second_patch_file
> make
> make install
> modprobe -r kvm-intel
>
> Then I lauch the winxp boot.
>
> Is it correct ?
>

Please use only the second patch.


-- 
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

OK
I restored the original vmx.c file and I applyed the second patch but 
wueh I boot winxp no lines are addes in /var/log/messages and dmesg 
produces the following :

kvm: msrs: 6





----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Thu, 14 Dec 2006 17:20:41 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, Avi Kivity <avik-atKUWr5tajBWk0Htik3J/w@public.gmane.org>


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>>
>> I did not understand ... sorry.
>> Let me to explain what I am doing...
>>
>> modprobe -r kvm-intel
>> cd kvm-7
>> patch kernel/vmx.c your_first_patch_file
>> pacth kernel/vmx.c your_second_patch_file
>> make
>> make install
>> modprobe -r kvm-intel
>>
>> Then I lauch the winxp boot.
>>
>> Is it correct ?
>>
>
> Please use only the second patch.
>
>
> --
> error compiling committee.c: too many arguments to function
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> kvm-devel mailing list
> kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/kvm-devel
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Avi Kivity]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
> OK
> I restored the original vmx.c file and I applyed the second patch but 
> wueh I boot winxp no lines are addes in /var/log/messages and dmesg 
> produces the following :
>
> kvm: msrs: 6
>
>

How does it crash now?

-- 
Do not meddle in the internals of kernels, for they are subtle and quick to panic.


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

Now I execute:


/usr/local/bin/qemu-system-x86_64 -no-acpi -hda 
/root/winXP/windows_kvm.disk -boot c -m 512


On the terminal where I execute the command the following appears:

unhandled vm exit:  0x80000022
rax 0000000000000800 rbx 00000000ffdff120 rcx 00000000c0000080 rdx 
0000000000000000
rsi 0000000000000000 rdi 00000000c0000080 rsp 0000000080548de8 rbp 
0000000080548e3c
r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11 
0000000000000000
r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 
0000000000000000
rip 00000000804fee82 rflags 00000006
Aborted

Dmesg reports:

kvm: msrs: 6


The Xp windows crashes immediately.


Thanks
Igna


----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Fri, 15 Dec 2006 07:28:43 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, Avi Kivity <avik-atKUWr5tajBWk0Htik3J/w@public.gmane.org>


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>> OK
>> I restored the original vmx.c file and I applyed the second patch 
>> but wueh I boot winxp no lines are addes in /var/log/messages and 
>> dmesg produces the following :
>>
>> kvm: msrs: 6
>>
>>
>
> How does it crash now?
>
> -- 
> Do not meddle in the internals of kernels, for they are subtle and 
> quick to panic.
>
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Michael Riepe]

Hi!

I found this footnote in my Intel docs (22.4):

> Processing of an entry fails in any of the following cases:
[...]
> • An attempt to write bits 127:64 to the MSR indexed by bits 31:0 of the entry
> would cause a general-protection exception if executed via WRMSR with CPL =
> 0.

And there's a footnote that says:

> Note the following about processors that support Intel 64 architecture. If CR0.PG = 1, WRMSR to
> the IA32_EFER MSR causes a general-protection exception if it would modify the LME bit. Since
> CR0.PG is always 1 in VMX operation, the IA32_EFER MSR should not be included in the
> VM-entry MSR-load area for the purpose of modifying the LME bit.

Might that be the reason?

ignazio.cassano@provincia.torino.it wrote:
> Now I execute:
> 
> 
> /usr/local/bin/qemu-system-x86_64 -no-acpi -hda 
> /root/winXP/windows_kvm.disk -boot c -m 512
> 
> 
> On the terminal where I execute the command the following appears:
> 
> unhandled vm exit:  0x80000022
> rax 0000000000000800 rbx 00000000ffdff120 rcx 00000000c0000080 rdx 
> 0000000000000000
> rsi 0000000000000000 rdi 00000000c0000080 rsp 0000000080548de8 rbp 
> 0000000080548e3c
> r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11 
> 0000000000000000
> r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 
> 0000000000000000
> rip 00000000804fee82 rflags 00000006
> Aborted
> 
> Dmesg reports:
> 
> kvm: msrs: 6
[...]

-- 
Michael "Tired" Riepe <michael@mr511.de>
X-Tired: Each morning I get up I die a little

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
kvm-devel mailing list
kvm-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[Avi Kivity]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
> Now I execute:
>
>
> /usr/local/bin/qemu-system-x86_64 -no-acpi -hda 
> /root/winXP/windows_kvm.disk -boot c -m 512
>
>
> On the terminal where I execute the command the following appears:
>
> unhandled vm exit:  0x80000022
> rax 0000000000000800 rbx 00000000ffdff120 rcx 00000000c0000080 rdx 
> 0000000000000000
> rsi 0000000000000000 rdi 00000000c0000080 rsp 0000000080548de8 rbp 
> 0000000080548e3c
> r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11 
> 0000000000000000
> r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 
> 0000000000000000
> rip 00000000804fee82 rflags 00000006
> Aborted
>
> Dmesg reports:
>
> kvm: msrs: 6
>
>
> The Xp windows crashes immediately.
>
>

Ok, still the same.  The patch is wrong: please change the line


    if (fail && (vmcs_read32(VM_EXIT_REASON) == 0x80000022))


to

   if ((vmcs_read32(VM_EXIT_REASON) == 0x80000022))

so we can see the values.  I suspect it will confirm Michael's suspicions.


-- 
Do not meddle in the internals of kernels, for they are subtle and quick to panic.


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Avi Kivity]

Michael Riepe wrote:
> Hi!
>
> I found this footnote in my Intel docs (22.4):
>
>   
>> Processing of an entry fails in any of the following cases:
>>     
> [...]
>   
>> • An attempt to write bits 127:64 to the MSR indexed by bits 31:0 of the entry
>> would cause a general-protection exception if executed via WRMSR with CPL =
>> 0.
>>     
>
> And there's a footnote that says:
>
>   
>> Note the following about processors that support Intel 64 architecture. If CR0.PG = 1, WRMSR to
>> the IA32_EFER MSR causes a general-protection exception if it would modify the LME bit. Since
>> CR0.PG is always 1 in VMX operation, the IA32_EFER MSR should not be included in the
>> VM-entry MSR-load area for the purpose of modifying the LME bit.
>>     
>
>   

Well spotted!  I must have read this half a dozen times and never 
spotted the footnote. (the footnote is on _a different page_ to the 
footnote marker, which doesn't help)


> Might that be the reason?
>   

Very likely.  Though I wonder why no one has hit this before.


-- 
Do not meddle in the internals of kernels, for they are subtle and quick to panic.


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
kvm-devel mailing list
kvm-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

Hi, modifing the patch and launching windows boot it reports the following:

kvm: msrs: 6
VMentry guest msr[0] index=c0000084 data=3700
VMentry guest msr[1] index=c0000082 data=ffffffff8025be90
VMentry guest msr[2] index=c0000083 data=ffffffff8025efa0
VMentry guest msr[3] index=c0000102 data=0
VMentry host msr[0] index=c0000084 data=3700
VMentry host msr[1] index=c0000082 data=ffffffff8025be90
VMentry host msr[2] index=c0000083 data=ffffffff8025efa0
VMentry host msr[3] index=c0000102 data=0


I installed fedora core 6 on another machine and copied kvm and it works fine.

----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Sat, 16 Dec 2006 09:14:30 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, Avi Kivity <avik-atKUWr5tajBWk0Htik3J/w@public.gmane.org>


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>> Now I execute:
>>
>>
>> /usr/local/bin/qemu-system-x86_64 -no-acpi -hda 
>> /root/winXP/windows_kvm.disk -boot c -m 512
>>
>>
>> On the terminal where I execute the command the following appears:
>>
>> unhandled vm exit:  0x80000022
>> rax 0000000000000800 rbx 00000000ffdff120 rcx 00000000c0000080 rdx 
>> 0000000000000000
>> rsi 0000000000000000 rdi 00000000c0000080 rsp 0000000080548de8 rbp 
>> 0000000080548e3c
>> r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11 
>> 0000000000000000
>> r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 
>> 0000000000000000
>> rip 00000000804fee82 rflags 00000006
>> Aborted
>>
>> Dmesg reports:
>>
>> kvm: msrs: 6
>>
>>
>> The Xp windows crashes immediately.
>>
>>
>
> Ok, still the same.  The patch is wrong: please change the line
>
>
>    if (fail && (vmcs_read32(VM_EXIT_REASON) == 0x80000022))
>
>
> to
>
>   if ((vmcs_read32(VM_EXIT_REASON) == 0x80000022))
>
> so we can see the values.  I suspect it will confirm Michael's suspicions.
>
>
> -- 
> Do not meddle in the internals of kernels, for they are subtle and 
> quick to panic.
>
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Avi Kivity]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>
> Hi, modifing the patch and launching windows boot it reports the 
> following:
>
> kvm: msrs: 6
> VMentry guest msr[0] index=c0000084 data=3700
> VMentry guest msr[1] index=c0000082 data=ffffffff8025be90
> VMentry guest msr[2] index=c0000083 data=ffffffff8025efa0
> VMentry guest msr[3] index=c0000102 data=0
> VMentry host msr[0] index=c0000084 data=3700
> VMentry host msr[1] index=c0000082 data=ffffffff8025be90
> VMentry host msr[2] index=c0000083 data=ffffffff8025efa0
> VMentry host msr[3] index=c0000102 data=0
>
>

These are all good.

Can you try changing NR_BAD_MSRS (in kvm_vmx.h) from 2 to 6?




-- 
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

Hi, modified NR_BAD_MSRS, dmesg reports:


<7>kvm: msrs: 6
general protection fault: 0000 [2] SMP
last sysfs file: /class/misc/kvm/dev
CPU 1
Modules linked in: kvm_intel(U) kvm(U) autofs4 hidp rfcomm l2cap 
bluetooth sunrpc dm_mirror dm_multipath dm_mod video sbs i2c_ec button 
battery asus_acpi ac ipv6 parport_pc lp parport sg ohci1394 i2c_i801 
snd_hda_intel i2c_core ieee1394 snd_hda_codec snd_seq_dummy snd_seq_oss 
snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss floppy sky2 
snd_mixer_oss snd_pcm ide_cd serio_raw cdrom pcspkr shpchp snd_timer 
snd soundcore snd_page_alloc ata_piix libata sd_mod scsi_mod ext3 jbd 
ehci_hcd ohci_hcd uhci_hcd
Pid: 13157, comm: qemu-system-x86 Not tainted 2.6.18-1.2849.fc6 #1
RIP: 0010:[<ffffffff88511189>]  [<ffffffff88511189>] :kvm:load_msrs+0x13/0x22
RSP: 0018:ffff81003341bc40  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff81006b0b00d0 RCX: 00000000c0000080
RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffff81007484d050
RBP: ffff81006b0b0000 R08: 0000000000000004 R09: 0000000000064124
R10: 0000000000000000 R11: ffffffff88527d3f R12: 00000000fffffffe
R13: 00007fff2d3ef010 R14: ffff81003341bd08 R15: 00000000ffffffff
FS:  00002aaaaacc6580(0000) GS:ffff81007ff089c0(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000474730 CR3: 000000002f1a5000 CR4: 00000000000026e0
Process qemu-system-x86 (pid: 13157, threadinfo ffff81003341a000, task 
ffff81006c4b3040)
Stack:  ffffffff88528b82 ffff81000179f4c0 0000000000000000 0000000000000000
0000000000000000 0000000000000000 0000000000000000 ffffffff8020cd0d
0000000000000246 ffff81006b0b00e0 ffffffff802615a0 0000000000000282
Call Trace:
[<ffffffff88528b82>] :kvm_intel:vmx_vcpu_run+0x363/0x403
[<ffffffff88511f8e>] :kvm:kvm_dev_ioctl+0x254/0x103f
[<ffffffff8024057d>] do_ioctl+0x21/0x6b
[<ffffffff8023012e>] vfs_ioctl+0x256/0x26f
[<ffffffff8024adc7>] sys_ioctl+0x59/0x78
[<ffffffff8025bf0e>] system_call+0x7e/0x83
DWARF2 unwinder stuck at system_call+0x7e/0x83
Leftover inexact backtrace:


Code: 0f 30 41 ff c0 48 83 c7 10 41 39 f0 7c e4 c3 45 31 c0 eb 13
RIP  [<ffffffff88511189>] :kvm:load_msrs+0x13/0x22
RSP <ffff81003341bc40>



----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Mon, 18 Dec 2006 10:21:47 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>>
>> Hi, modifing the patch and launching windows boot it reports the following:
>>
>> kvm: msrs: 6
>> VMentry guest msr[0] index=c0000084 data=3700
>> VMentry guest msr[1] index=c0000082 data=ffffffff8025be90
>> VMentry guest msr[2] index=c0000083 data=ffffffff8025efa0
>> VMentry guest msr[3] index=c0000102 data=0
>> VMentry host msr[0] index=c0000084 data=3700
>> VMentry host msr[1] index=c0000082 data=ffffffff8025be90
>> VMentry host msr[2] index=c0000083 data=ffffffff8025efa0
>> VMentry host msr[3] index=c0000102 data=0
>>
>>
>
> These are all good.
>
> Can you try changing NR_BAD_MSRS (in kvm_vmx.h) from 2 to 6?
>
>
>
>
> -- 
> error compiling committee.c: too many arguments to function
>
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Avi Kivity]

[-- Attachment #1: Type: text/plain, Size: 238 bytes --]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
> Hi, modified NR_BAD_MSRS, dmesg reports:
>

ok, please revert all patches an apply the attached.

-- 
error compiling committee.c: too many arguments to function


[-- Attachment #2: dont-munge-efer.patch --]
[-- Type: text/x-patch, Size: 1149 bytes --]

Index: vmx.c
===================================================================
--- vmx.c	(revision 4120)
+++ vmx.c	(working copy)
@@ -74,7 +74,7 @@
 #ifdef CONFIG_X86_64
 	MSR_SYSCALL_MASK, MSR_LSTAR, MSR_CSTAR, MSR_KERNEL_GS_BASE,
 #endif
-	MSR_EFER, MSR_K6_STAR,
+	MSR_K6_STAR,
 };
 #define NR_VMX_MSR (sizeof(vmx_msr_index) / sizeof(*vmx_msr_index))
 
@@ -754,7 +754,6 @@
 
 	vcpu->shadow_efer |= EFER_LMA;
 
-	find_msr_entry(vcpu, MSR_EFER)->data |= EFER_LMA | EFER_LME;
 	vmcs_write32(VM_ENTRY_CONTROLS,
 		     vmcs_read32(VM_ENTRY_CONTROLS)
 		     | VM_ENTRY_CONTROLS_IA32E_MASK);
@@ -824,22 +823,15 @@
 
 static void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
 {
-	struct vmx_msr_entry *msr = find_msr_entry(vcpu, MSR_EFER);
-
 	vcpu->shadow_efer = efer;
-	if (efer & EFER_LMA) {
+	if (efer & EFER_LMA)
 		vmcs_write32(VM_ENTRY_CONTROLS,
 				     vmcs_read32(VM_ENTRY_CONTROLS) |
 				     VM_ENTRY_CONTROLS_IA32E_MASK);
-		msr->data = efer;
-
-	} else {
+	else
 		vmcs_write32(VM_ENTRY_CONTROLS,
 				     vmcs_read32(VM_ENTRY_CONTROLS) &
 				     ~VM_ENTRY_CONTROLS_IA32E_MASK);
-
-		msr->data = efer & ~EFER_LME;
-	}
 }
 
 #endif

[-- Attachment #3: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

Hi, I reverted all patched and applied last one.
How when windows XP start the qemu windows remains frozen . No warnings 
o messages are displayed.
The host cannot be reachable from network.

Thanks

----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Mon, 18 Dec 2006 11:32:19 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>> Hi, modified NR_BAD_MSRS, dmesg reports:
>>
>
> ok, please revert all patches an apply the attached.
>
> -- 
> error compiling committee.c: too many arguments to function
>
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Avi Kivity]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>
> Hi, I reverted all patched and applied last one.
> How when windows XP start the qemu windows remains frozen . No 
> warnings o messages are displayed.
> The host cannot be reachable from network.
>

Please send the host .config.


-- 
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

Hu,
where is .config file ?
I did not find it in kvm directory .


----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Tue, 19 Dec 2006 12:34:30 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>>
>> Hi, I reverted all patched and applied last one.
>> How when windows XP start the qemu windows remains frozen . No 
>> warnings o messages are displayed.
>> The host cannot be reachable from network.
>>
>
> Please send the host .config.
>
>
> -- 
> error compiling committee.c: too many arguments to function
>
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Avi Kivity]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>
> Hu,
> where is .config file ?
> I did not find it in kvm directory .
>

The .config file used to compile the kernel.  If you didn't compile it 
yourself, it can probably be found in /boot/config-2.6.18.x.y.z for 
something similar.

What distribution are you using?

-- 
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

Oh sorry !!!
Probably you mean the kernel .config file ?


----- Messaggio da ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org ---------
    Data: Tue, 19 Dec 2006 11:54:52 +0100
    Da: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
Rispondi-A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


>
> Hu,
> where is .config file ?
> I did not find it in kvm directory .
>
>
> ----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
>    Data: Tue, 19 Dec 2006 12:34:30 +0200
>    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
> Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
> Oggetto: Re: [kvm-devel] Windows XP internal Power error
>      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
>      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
>
>
>> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>>>
>>> Hi, I reverted all patched and applied last one.
>>> How when windows XP start the qemu windows remains frozen . No
>>> warnings o messages are displayed.
>>> The host cannot be reachable from network.
>>>
>>
>> Please send the host .config.
>>
>>
>> --
>> error compiling committee.c: too many arguments to function
>>
>>
>
>
> ----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----
>
>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> kvm-devel mailing list
> kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/kvm-devel
>


----- Fine messaggio da ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

[-- Attachment #1: Type: text/plain, Size: 4441 bytes --]

Sorry, you can find it attacched here.
I use fedora core 6 distrib.
Really with the last patch, first tile I boot Windows Xp guest, the 
following is displayed in /var/log/messages:

Dec 19 12:10:10 timb194083 kernel: CPU 1 Dec 19 12:10:10 timb194083 
kernel: Modules linked in: kvm_intel(U) kvm(U) autofs4 hidp rfcomm 
l2cap bluetooth sunrpc dm_mirror dm_multipath dm_mod video sbs i2c_ec 
button battery asus_acpi ac ipv6 parport_pc lp parport snd_hda_intel 
snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq sg 
snd_seq_device snd_pcm_oss snd_mixer_oss sky2 i2c_i801 floppy snd_pcm 
i2c_core shpchp ohci1394 snd_timer snd pcspkr ide_cd serio_raw 
soundcore snd_page_alloc cdrom ieee1394 ata_piix libata sd_mod scsi_mod 
ext3 jbd ehci_hcd ohci_hcd uhci_hcd
Dec 19 12:10:10 timb194083 kernel: Pid: 2947, comm: qemu-system-x86 
Tainted: G   M  2.6.18-1.2849.fc6 #1
Dec 19 12:10:10 timb194083 kernel: RIP: 0010:[<ffffffff8850a189>]  
[<ffffffff8850a189>] :kvm:load_msrs+0x13/0x22
Dec 19 12:10:10 timb194083 kernel: RSP: 0018:ffff81005ccd9c40  EFLAGS: 
00010246
Dec 19 12:10:10 timb194083 kernel: RAX: 0000000050630000 RBX: 
ffff81005c04c0d0 RCX: 000000000000ffff
Dec 19 12:10:10 timb194083 kernel: RDX: 0000000000000000 RSI: 
0000000000000006 RDI: ffff81003babd060
Dec 19 12:10:10 timb194083 kernel: RBP: ffff81005c04c0d0 R08: 
0000000000000005 R09: 0000000000000094
Dec 19 12:10:10 timb194083 kernel: R10: 0000000000000000 R11: 
ffffffff88520cf4 R12: 00000000fffffffe
Dec 19 12:10:10 timb194083 kernel: R13: ffff81005ccd9d08 R14: 
ffff81005ccd9d08 R15: 00000000ffffffff
Dec 19 12:10:10 timb194083 kernel: FS:  00002aaaaacc6580(0000) 
GS:ffff81007ff089c0(0000) knlGS:0000000000000000
Dec 19 12:10:10 timb194083 kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 
0000000080050033
Dec 19 12:10:10 timb194083 kernel: CR2: 0000000000474730 CR3: 
000000005f718000 CR4: 00000000000026e0
Dec 19 12:10:10 timb194083 kernel: Process qemu-system-x86 (pid: 2947, 
threadinfo ffff81005ccd8000, task ffff81005f559080)
Dec 19 12:10:10 timb194083 kernel: Stack:  ffffffff88521b37 
ffff810002f6f440 0000000000000000 0000000000000000
Dec 19 12:10:10 timb194083 kernel:  0000000000000000 0000000000000000 
0000000000000000 ffffffff8020cd0d
Dec 19 12:10:10 timb194083 kernel:  0000000000000246 ffff81005c04c0e0 
ffffffff802615a0 0000000000000282
Dec 19 12:10:10 timb194083 kernel: Call Trace:
Dec 19 12:10:10 timb194083 kernel:  [<ffffffff88521b37>] 
:kvm_intel:vmx_vcpu_run+0x363/0x403
Dec 19 12:10:10 timb194083 kernel:  [<ffffffff8850af8e>] 
:kvm:kvm_dev_ioctl+0x254/0x103f
Dec 19 12:10:10 timb194083 kernel:  [<ffffffff8024057d>] do_ioctl+0x21/0x6b
Dec 19 12:10:10 timb194083 kernel:  [<ffffffff8023012e>] vfs_ioctl+0x256/0x26f
Dec 19 12:10:10 timb194083 kernel:  [<ffffffff8024adc7>] sys_ioctl+0x59/0x78
Dec 19 12:10:10 timb194083 kernel:  [<ffffffff8025bf0e>] system_call+0x7e/0x83
Dec 19 12:10:10 timb194083 kernel: DWARF2 unwinder stuck at 
system_call+0x7e/0x83
Dec 19 12:10:10 timb194083 kernel: Leftover inexact backtrace:
Dec 19 12:10:10 timb194083 kernel: Dec 19 12:10:10 timb194083 kernel: 
Dec 19 12:10:10 timb194083 kernel: Code: 0f 30 41 ff c0 48 83 c7 10 41 
39 f0 7c e4 c3 45 31 c0 eb 13 Dec 19 12:10:10 timb194083 kernel: RIP  
[<ffffffff8850a189>] :kvm:load_msrs+0x13/0x22
Dec 19 12:10:10 timb194083 kernel:  RSP <ffff81005ccd9c40>




Second time I boot Windows Xp guest, the qemu windows is frozen and my 
host stops to respond on the network (I must reboot it).


----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Tue, 19 Dec 2006 13:01:12 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>>
>> Hu,
>> where is .config file ?
>> I did not find it in kvm directory .
>>
>
> The .config file used to compile the kernel.  If you didn't compile 
> it yourself, it can probably be found in /boot/config-2.6.18.x.y.z 
> for something similar.
>
> What distribution are you using?
>
> -- 
> error compiling committee.c: too many arguments to function
>
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----



[-- Attachment #2: config-file --]
[-- Type: application/octet-stream, Size: 63260 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18-1.2849.fc6
# Fri Nov 10 12:31:14 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not set
CONFIG_CPUSETS=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Process debugging support
#
CONFIG_UTRACE=y
CONFIG_PTRACE=y

#
# Block layer
#
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_GENERIC_CPU=y
# CONFIG_X86_64_XEN is not set
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y

#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=255
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SUSPEND_SMP=y

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_ACPI_CPUFREQ=m

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y

#
# TCP congestion control
#
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_SECMARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m

#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y

#
# TIPC Configuration (EXPERIMENTAL)
#
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_DECNET_ROUTE_FWMARK=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m

#
# Old SIR device drivers
#

#
# Old Serial dongle support
#

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
CONFIG_IEEE80211_SOFTMAC_DEBUG=y
CONFIG_TUX=m

#
# TUX options
#
CONFIG_TUX_EXTCGI=y
CONFIG_TUX_EXTENDED_LOG=y
# CONFIG_TUX_DEBUG is not set
CONFIG_WIRELESS_EXT=y
CONFIG_NETLABEL=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# CONFIG_MTD_OBSOLETE_CHIPS is not set

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PNC2000 is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set

#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_NANDSIM=m

#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_BLOCKSIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_HPT34X=y
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT821X=y
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set

#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_SATA=m
CONFIG_SCSI_SATA_AHCI=m
CONFIG_SCSI_SATA_SVW=m
CONFIG_SCSI_ATA_PIIX=m
CONFIG_SCSI_SATA_MV=m
CONFIG_SCSI_SATA_NV=m
CONFIG_SCSI_PDC_ADMA=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_SATA_QSTOR=m
CONFIG_SCSI_SATA_PROMISE=m
CONFIG_SCSI_SATA_SX4=m
CONFIG_SCSI_SATA_SIL=m
CONFIG_SCSI_SATA_SIL24=m
CONFIG_SCSI_SATA_SIS=m
CONFIG_SCSI_SATA_ULI=m
CONFIG_SCSI_SATA_VIA=m
CONFIG_SCSI_SATA_VITESSE=m
CONFIG_SCSI_SATA_INTEL_COMBINED=y
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m

#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m

#
# I2O device support
#
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_FORCEDETH=m
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_RHINE_NAPI=y
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m

#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m

#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
# CONFIG_TMS380TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
# CONFIG_ATM_FORE200E_PCA is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
CONFIG_ISDN=m

#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y

#
# Active cards
#

#
# Siemens Gigaset
#
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set

#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#

#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m

#
# Active Eicon DIVA Server cards
#
# CONFIG_CAPI_EICON is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_CRASH=m
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_TIPAR=m

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
# CONFIG_SC1200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_GEODE is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m

#
# TPM devices
#
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y

#
# Video Capture Adapters
#

#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7134_DVB_ALL_FRONTENDS=y
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_DVB_ALL_FRONTENDS=y

#
# Encoders and Decoders
#
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set

#
# Radio Adapters
#
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m

#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m

#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m

#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m

#
# Miscellaneous devices
#
CONFIG_DVB_PLL=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m

#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_LIBUSUAL=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
# CONFIG_USB_YEALINK is not set
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TEST=m

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m

#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m

#
# InfiniBand support
#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_IPATH_CORE=m
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SDP=m
CONFIG_INFINIBAND_SDP_DEBUG=y
CONFIG_INFINIBAND_SDP_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_K8=m
CONFIG_EDAC_POLL=y

#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set

#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
CONFIG_RTC_DRV_V3020=m

#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m

#
# Caches
#
CONFIG_FSCACHE=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_SQUASHFS_VMALLOC is not set
CONFIG_VXFS_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_LIST=y
# CONFIG_FRAME_POINTER is not set
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
# CONFIG_FORCED_INLINING is not set
CONFIG_BOOT_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SECLVL is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIGNATURE=y
CONFIG_CRYPTO_SIGNATURE_DSA=y
CONFIG_CRYPTO_MPILIB=y

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y

[-- Attachment #3: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[Avi Kivity]

[-- Attachment #1: Type: text/plain, Size: 639 bytes --]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
> Dec 19 12:10:10 timb194083 kernel: Process qemu-system-x86 (pid: 2947, 
> threadinfo ffff81005ccd8000, task Dec 19 12:10:10 timb194083 kernel: 
> Dec 19 12:10:10 timb194083 kernel: Dec 19 12:10:10 timb194083 kernel: 
> Code: 0f 30 41 ff c0 48 83 c7 10 41 39 f0 7c e4 c3 45 31 c0 eb 13 Dec 
> 19 12:10:10 timb194083 kernel: RIP  [<ffffffff8850a189>] 
> :kvm:load_msrs+0x13/0x22

This is helpful.  Please try the attached patch (on top of the previous 
patch) and report dmesg or /var/log/messages.


-- 
error compiling committee.c: too many arguments to function


[-- Attachment #2: safe-msr.patch --]
[-- Type: text/x-patch, Size: 424 bytes --]

--- kernel/kvm_main.c.msr	2006-12-19 13:23:13.000000000 +0200
+++ kernel/kvm_main.c	2006-12-19 13:25:06.000000000 +0200
@@ -1170,7 +1170,10 @@
 	int i;
 
 	for (i = 0; i < n; ++i)
-		wrmsrl(e[i].index, e[i].data);
+		if (wrmsr_safe(e[i].index, (u32)e[i].data, (u32)(e[i].data >> 32)))
+			printk(KERN_EMERG "kvm: wrmsr failed: %d %x %llx\n",
+			       i, e[i].index, e[i].data);
+		    
 }
 EXPORT_SYMBOL_GPL(load_msrs);
 

[-- Attachment #3: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[Uri Lublin]

[-- Attachment #1.1: Type: text/plain, Size: 876 bytes --]

Please try with attached patch.


-----Original Message-----
From: kvm-devel-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org on behalf of ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
Sent: Tue 19/12/2006 13:15
To: Avi Kivity
Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [kvm-devel] Windows XP internal Power error
 
Sorry, you can find it attacched here.
I use fedora core 6 distrib.
Really with the last patch, first tile I boot Windows Xp guest, the 
following is displayed in /var/log/messages:

<snipped>

Dec 19 12:10:10 timb194083 kernel: RIP: 0010:[<ffffffff8850a189>] 
[<ffffffff8850a189>] :kvm:load_msrs+0x13/0x22

<snipped>

Dec 19 12:10:10 timb194083 kernel: Call Trace:
Dec 19 12:10:10 timb194083 kernel:  [<ffffffff88521b37>]
:kvm_intel:vmx_vcpu_run+0x363/0x403

<snipped>

[-- Attachment #1.2: Type: text/html, Size: 1406 bytes --]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: bad_msrs.patch --]
[-- Type: text/x-patch; name="bad_msrs.patch", Size: 1431 bytes --]

--- kernel/vmx.c	2006-12-19 14:35:47.000000000 +0200
+++ kernel/vmx.c.bad_msrs_fix	2006-12-19 14:34:58.000000000 +0200
@@ -1158,11 +1158,11 @@
 
 	nr_good_msrs = vcpu->nmsrs - NR_BAD_MSRS;
 	vmcs_writel(VM_ENTRY_MSR_LOAD_ADDR,
-		    virt_to_phys(vcpu->guest_msrs + NR_BAD_MSRS));
+		    virt_to_phys(vcpu->guest_msrs));
 	vmcs_writel(VM_EXIT_MSR_STORE_ADDR,
-		    virt_to_phys(vcpu->guest_msrs + NR_BAD_MSRS));
+		    virt_to_phys(vcpu->guest_msrs));
 	vmcs_writel(VM_EXIT_MSR_LOAD_ADDR,
-		    virt_to_phys(vcpu->host_msrs + NR_BAD_MSRS));
+		    virt_to_phys(vcpu->host_msrs));
 	vmcs_write32_fixedbits(MSR_IA32_VMX_EXIT_CTLS_MSR, VM_EXIT_CONTROLS,
 		     	       (HOST_IS_64 << 9));  /* 22.2,1, 20.7.1 */
 	vmcs_write32(VM_EXIT_MSR_STORE_COUNT, nr_good_msrs); /* 22.2.2 */
@@ -1720,8 +1720,8 @@
 	fx_save(vcpu->host_fx_image);
 	fx_restore(vcpu->guest_fx_image);
 
-	save_msrs(vcpu->host_msrs, vcpu->nmsrs);
-	load_msrs(vcpu->guest_msrs, NR_BAD_MSRS);
+	save_msrs(vcpu->host_msrs, vcpu->nmsrs - NR_BAD_MSRS);
+	load_msrs(vcpu->guest_msrs, vcpu->nmsrs - NR_BAD_MSRS);
 
 	asm (
 		/* Store host registers */
@@ -1844,8 +1844,8 @@
 
 	++kvm_stat.exits;
 
-	save_msrs(vcpu->guest_msrs, NR_BAD_MSRS);
-	load_msrs(vcpu->host_msrs, NR_BAD_MSRS);
+	save_msrs(vcpu->guest_msrs, vcpu->nmsrs - NR_BAD_MSRS);
+	load_msrs(vcpu->host_msrs, vcpu->nmsrs - NR_BAD_MSRS);
 
 	fx_save(vcpu->guest_fx_image);
 	fx_restore(vcpu->host_fx_image);

[-- Attachment #3: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

Applayed patch.
Now qemu and host are frozen e nothing is reported in /var/log/messages.



----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Tue, 19 Dec 2006 13:28:53 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>> Dec 19 12:10:10 timb194083 kernel: Process qemu-system-x86 (pid: 
>> 2947, threadinfo ffff81005ccd8000, task Dec 19 12:10:10 timb194083 
>> kernel: Dec 19 12:10:10 timb194083 kernel: Dec 19 12:10:10 
>> timb194083 kernel: Code: 0f 30 41 ff c0 48 83 c7 10 41 39 f0 7c e4 
>> c3 45 31 c0 eb 13 Dec 19 12:10:10 timb194083 kernel: RIP  
>> [<ffffffff8850a189>] :kvm:load_msrs+0x13/0x22
>
> This is helpful.  Please try the attached patch (on top of the 
> previous patch) and report dmesg or /var/log/messages.
>
>
> -- 
> error compiling committee.c: too many arguments to function
>
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

Must I rewind the other patches before applying this one ?


----- Messaggio da uri.lublin-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Tue, 19 Dec 2006 04:46:27 -0800
    Da: Uri Lublin <uri.lublin-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Uri Lublin <uri.lublin-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


> Please try with attached patch.
>
>
> -----Original Message-----
> From: kvm-devel-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org on behalf of 
> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
> Sent: Tue 19/12/2006 13:15
> To: Avi Kivity
> Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> Subject: Re: [kvm-devel] Windows XP internal Power error
>
> Sorry, you can find it attacched here.
> I use fedora core 6 distrib.
> Really with the last patch, first tile I boot Windows Xp guest, the
> following is displayed in /var/log/messages:
>
> <snipped>
>
> Dec 19 12:10:10 timb194083 kernel: RIP: 0010:[<ffffffff8850a189>]
> [<ffffffff8850a189>] :kvm:load_msrs+0x13/0x22
>
> <snipped>
>
> Dec 19 12:10:10 timb194083 kernel: Call Trace:
> Dec 19 12:10:10 timb194083 kernel:  [<ffffffff88521b37>]
> :kvm_intel:vmx_vcpu_run+0x363/0x403
>
> <snipped>
>


----- Fine messaggio da uri.lublin-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Avi Kivity]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>
> Applayed patch.
> Now qemu and host are frozen e nothing is reported in /var/log/messages.
>

Please try with serial console or netconsole.


-- 
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

I tried with the -vnc option.
My host frozen.

----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Tue, 19 Dec 2006 15:17:04 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>>
>> Applayed patch.
>> Now qemu and host are frozen e nothing is reported in /var/log/messages.
>>
>
> Please try with serial console or netconsole.
>
>
> -- 
> error compiling committee.c: too many arguments to function
>
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Avi Kivity]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>
> I tried with the -vnc option.
> My host frozen.
>

Ok.  I sure don't know what's wrong on that machine then.

I'll try to come up with a better patch.

-- 
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

Re: Windows XP internal Power error

[Uri Lublin]

[-- Attachment #1.1: Type: text/plain, Size: 1966 bytes --]

Sorry, the patch is broken, please ignore it.


-----Original Message-----
From: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org [mailto:ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org]
Sent: Tue 19/12/2006 15:05
To: Uri Lublin
Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: [kvm-devel] Windows XP internal Power error
 

Must I rewind the other patches before applying this one ?


----- Messaggio da uri.lublin-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Tue, 19 Dec 2006 04:46:27 -0800
    Da: Uri Lublin <uri.lublin-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Uri Lublin <uri.lublin-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


> Please try with attached patch.
>
>
> -----Original Message-----
> From: kvm-devel-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org on behalf of 
> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
> Sent: Tue 19/12/2006 13:15
> To: Avi Kivity
> Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> Subject: Re: [kvm-devel] Windows XP internal Power error
>
> Sorry, you can find it attacched here.
> I use fedora core 6 distrib.
> Really with the last patch, first tile I boot Windows Xp guest, the
> following is displayed in /var/log/messages:
>
> <snipped>
>
> Dec 19 12:10:10 timb194083 kernel: RIP: 0010:[<ffffffff8850a189>]
> [<ffffffff8850a189>] :kvm:load_msrs+0x13/0x22
>
> <snipped>
>
> Dec 19 12:10:10 timb194083 kernel: Call Trace:
> Dec 19 12:10:10 timb194083 kernel:  [<ffffffff88521b37>]
> :kvm_intel:vmx_vcpu_run+0x363/0x403
>
> <snipped>
>


----- Fine messaggio da uri.lublin-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----





[-- Attachment #1.2: Type: text/html, Size: 2867 bytes --]

[-- Attachment #2: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #3: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[Avi Kivity]

[-- Attachment #1: Type: text/plain, Size: 970 bytes --]

ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
> Good moorning, I changed the -boot option in 'c' but when my Windows Xp boot
> to complete the installation I got the following errors:
>
> unhandled vm exit:  0x80000022
> rax 0000000000000800 rbx 00000000ffdff120 rcx 00000000c0000080 rdx 
> 0000000000000000
> rsi 0000000000000000 rdi 00000000c0000080 rsp 0000000080548de8 rbp 
> 0000000080548e3c
> r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11 
> 0000000000000000
> r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 
> 0000000000000000
> rip 00000000804fee82 rflags 00000006
>
>
>   

A laptop came back from service yesterday and started exhibiting the 
same problem.  Turns out some Intel processors don't support the nx 
feature, which qemu reports as present.

I committed the attached patch to kvm/qemu.  It should fix the problem.


-- 
error compiling committee.c: too many arguments to function


[-- Attachment #2: no-nx.patch --]
[-- Type: text/x-patch, Size: 693 bytes --]

Index: trunk/qemu/qemu-kvm.c
===================================================================
--- trunk/qemu/qemu-kvm.c	(revision 4183)
+++ trunk/qemu/qemu-kvm.c	(revision 4184)
@@ -440,7 +440,7 @@
     *rcx = env->regs[R_ECX];
     *rbx = env->regs[R_EBX];
     *rax = env->regs[R_EAX];
-    // don't report long mode/syscall if no native support
+    // don't report long mode/syscall/nx if no native support
     if (eax == 0x80000001) {
 	unsigned long h_eax = eax, h_edx;
 
@@ -460,6 +460,9 @@
 	// syscall
 	if ((h_edx & 0x00000800) == 0)
 	    *rdx &= ~0x00000800ull;
+	// nx
+	if ((h_edx & 0x00100000) == 0)
+	    *rdx &= ~0x00100000ull;
     }
     env = saved_env;
     return 0;

[-- Attachment #3: Type: text/plain, Size: 347 bytes --]

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

[-- Attachment #4: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel

Re: Windows XP internal Power error

[ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT]

Many thanks.
The patch works fine.




----- Messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org ---------
    Data: Tue, 26 Dec 2006 16:58:27 +0200
    Da: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Rispondi-A: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Oggetto: Re: [kvm-devel] Windows XP internal Power error
      A: ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org
      Cc: Dor Laor <dor.laor-atKUWr5tajBWk0Htik3J/w@public.gmane.org>, kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org


> ignazio.cassano-VeGButH3FaVpxaeRVNJOcDUZDU+1vuVT@public.gmane.org wrote:
>> Good moorning, I changed the -boot option in 'c' but when my Windows Xp boot
>> to complete the installation I got the following errors:
>>
>> unhandled vm exit:  0x80000022
>> rax 0000000000000800 rbx 00000000ffdff120 rcx 00000000c0000080 rdx 
>> 0000000000000000
>> rsi 0000000000000000 rdi 00000000c0000080 rsp 0000000080548de8 rbp 
>> 0000000080548e3c
>> r8  0000000000000000 r9  0000000000000000 r10 0000000000000000 r11 
>> 0000000000000000
>> r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 
>> 0000000000000000
>> rip 00000000804fee82 rflags 00000006
>>
>>
>>
>
> A laptop came back from service yesterday and started exhibiting the 
> same problem.  Turns out some Intel processors don't support the nx 
> feature, which qemu reports as present.
>
> I committed the attached patch to kvm/qemu.  It should fix the problem.
>
>
> -- 
> error compiling committee.c: too many arguments to function
>
>


----- Fine messaggio da avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org -----




-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV