* BUG_ON in mmu.c:436
@ 2007-09-23 21:55 Ryan Harper
[not found] ` <20070923215548.GP7519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: Ryan Harper @ 2007-09-23 21:55 UTC (permalink / raw)
To: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
[-- Attachment #1: Type: text/plain, Size: 4970 bytes --]
I've run into a nasty bug while trying to install a Linux guest using
VMware Server inside a kvm guest (full dmesg attached and recreate
instructions below bug).
kernel BUG at /opt/tickless/kvm-43/kernel/mmu.c:436!
invalid opcode: 0000 [1] SMP
CPU 0
Modules linked in: kvm_amd kvm
Pid: 3274, comm: qemu-system-x86 Not tainted 2.6.22-hal_x86_64 #5
RIP: 0010:[<ffffffff88007ff8>] [<ffffffff88007ff8>] :kvm:kvm_mmu_get_page+0x2d5/0x321
RSP: 0018:ffff810126f01858 EFLAGS: 00010293
RAX: 000000000011a338 RBX: 0000000000000000 RCX: ffff81012a564080
RDX: 000ffffffffff000 RSI: 000000000000c3b9 RDI: 000000000011a338
RBP: ffff8100bf57c638 R08: 0000000000000000 R09: 0000000000000004
R10: 0000000000000000 R11: ffffffff8801971c R12: ffff810103c1c0f0
R13: ffff81012fb3b440 R14: ffff810105fe8000 R15: 000000000000c3b9
FS: 0000000000000000(0000) GS:ffffffff8073b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000006b9540 CR3: 00000001276d6000 CR4: 00000000000006e0
Process qemu-system-x86 (pid: 3274, threadinfo ffff810126f00000, task ffff81012717c6b0)
Stack: 0000000000000004 0000000000000002 ffff8100c02ccff0 ffff810105fe8000
0000000000000015 00000000ffc487c3 0000000000000000 ffffffff880084cb
ffff8100c02ccff0 0000000000000000 ffff81012713c340 ffff810001025880
Call Trace:
[<ffffffff880084cb>] :kvm:paging64_page_fault+0x18f/0x27a
[<ffffffff8800a4d4>] :kvm:x86_emulate_insn+0x1bcb/0x2eb0
[<ffffffff88018cf3>] :kvm_amd:svm_vcpu_load+0x0/0x56
[<ffffffff88019797>] :kvm_amd:pf_interception+0x7b/0x100
[<ffffffff880041d8>] :kvm:kvm_vcpu_ioctl_run+0x292/0x3a3
[<ffffffff880043f6>] :kvm:kvm_vcpu_ioctl+0x10d/0xd7f
[<ffffffff8021e487>] gart_map_single+0x2c/0x6f
[<ffffffff803ea947>] bnx2_start_xmit+0x27f/0x500
[<ffffffff80288260>] do_select+0x449/0x466
[<ffffffff80288769>] __pollwait+0x0/0xe1
[<ffffffff804ea3a6>] ip_queue_xmit+0x2f1/0x344
[<ffffffff804f8cd9>] tcp_send_ack+0x23/0x102
[<ffffffff804f8bac>] tcp_transmit_skb+0x6a1/0x6de
[<ffffffff804cc8b2>] __alloc_skb+0x84/0x13c
[<ffffffff80553f0f>] _spin_lock_bh+0x9/0x19
[<ffffffff804c8c05>] release_sock+0x13/0x9b
[<ffffffff804f0cfc>] tcp_recvmsg+0x6bb/0x7ce
[<ffffffff804c8562>] sock_common_recvmsg+0x30/0x45
[<ffffffff804cdc38>] memcpy_toiovec+0x36/0x66
[<ffffffff802765e2>] add_partial+0x12/0x3f
[<ffffffff80277331>] __slab_free+0x74/0x2d4
[<ffffffff80242837>] remove_wait_queue+0x12/0x45
[<ffffffff803fa70c>] tun_chr_aio_read+0x2a9/0x2bb
[<ffffffff802884b1>] core_sys_select+0x234/0x265
[<ffffffff8024468e>] enqueue_hrtimer+0x64/0x6b
[<ffffffff80244bf4>] hrtimer_start+0xf2/0x104
[<ffffffff80239ead>] __dequeue_signal+0x19/0x15a
[<ffffffff80239953>] recalc_sigpending+0xe/0x25
[<ffffffff8023b477>] dequeue_signal+0xa5/0x126
[<ffffffff8028722f>] do_ioctl+0x2b/0xb6
[<ffffffff802874fd>] vfs_ioctl+0x243/0x25c
[<ffffffff80245c27>] getnstimeofday+0x32/0x8b
[<ffffffff80287552>] sys_ioctl+0x3c/0x5e
[<ffffffff802092de>] system_call+0x7e/0x83
Code: 0f 0b eb fe 48 8b 45 00 a8 01 75 04 0f 0b eb fe a8 02 75 04
RIP [<ffffffff88007ff8>] :kvm:kvm_mmu_get_page+0x2d5/0x321
RSP <ffff810126f01858>
Here is the setup:
IBM LS21 - 2 socket AMD Host, 64-bit mode, kvm-43 on 2.6.22, 4G ram
1. Apply set_cr3 gp fault patch to kvm, rebuild and insert modules.
2. Install Ubuntu Fiesty i386 into a KVM guest
1. qemu-img create -f qcow2 vmware-server.img 50G
2. qemu-system-x86_64 -hda vmware-server.img -m 512 -no-rtc -net tap -net nic,model=rtl8139 -vnc :1 -cdrom /home/rharper/ubuntu-7.04-desktop-i386.iso -boot d
2. Download FC-6 i386 disc 1 from some fedora mirror
http://mirrors.kernel.org/fedora/core/6/i386/iso/FC-6-i386-disc1.iso
3. Boot Feisty guest and install VMware Server following this guide:
http://www.ubuntugeek.com/how-to-install-vmware-server-from-canonical-commercial-repository-in-ubuntu-feisty.html
./qemu-system-x86_64 -hda vmware-server.img -m 512 -no-rtc -net tap
-net nic,model=rtl8139 -vnc :1 -cdrom FC-6-i386-disc1.iso -boot c
4. Reboot and Run Vmware-server tool (Applications->System Tools->VMWare
Server Console)
5. Create New Virtual Machine:
1. Typical
2. Linux
3. Red Hat Linux
4. Default location is ok
5. Use NAT
6. 8G is fine, don't allocate and don't split into 2G
7. Finish
6. Stop guest and rerun qemu but with -snapshot (so I don't corrupt the
guest disk)
./qemu-system-x86_64 -hda vmware-server.img -snapshot -m 512 -no-rtc \
-net tap -net nic,model=rtl8139 -vnc :1 -cdrom FC-6-i386-disc1.iso
6. Power on VM
1. Hit enter at Fedora Boot menu
2. Skip disk check
3. Wait for anaconda to start to load - gets to a black screen
At this point, sometimes the bug will trip, other times, I need to do
some work in the host (tar tzvf kvm-43.tar.gz) a couple times and it
trips.
--
Ryan Harper
Software Engineer; Linux Technology Center
IBM Corp., Austin, Tx
(512) 838-9253 T/L: 678-9253
ryanh-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org
[-- Attachment #2: dmesg.out --]
[-- Type: text/plain, Size: 33790 bytes --]
Linux version 2.6.22 (root@leaf8) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #5 SMP Fri Aug 24 10:23:37 CDT 2007
Command line: root=/dev/sda1 ro console=tty0 console=ttyS0,19200
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffa44c0 (usable)
BIOS-e820: 00000000cffa44c0 - 00000000cffa7400 (ACPI data)
BIOS-e820: 00000000cffa7400 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f4000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 851876) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
end_pfn_map = 1245184
DMI 2.3 present.
ACPI: RSDP 000FDFE0, 0014 (r0 IBM )
ACPI: RSDT CFFA7380, 0038 (r1 IBM SERLEWIS 1000 IBM 45444F43)
ACPI: FACP CFFA72C0, 0084 (r2 IBM SERLEWIS 1000 IBM 45444F43)
ACPI: DSDT CFFA44C0, 2B02 (r1 IBM SERLEWIS 1000 INTL 2002025)
ACPI: FACS CFFA7040, 0040
ACPI: APIC CFFA7200, 0090 (r1 IBM SERLEWIS 1000 IBM 45444F43)
ACPI: SRAT CFFA7100, 00E8 (r1 AMD HAMMER 1 AMD 1)
ACPI: HPET CFFA70C0, 0038 (r1 IBM SERLEWIS 1000 IBM 45444F43)
ACPI: MCFG CFFA7080, 003C (r1 IBM SERLEWIS 1000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-d0000000
Entering add_active_range(0, 0, 157) 1 entries of 3200 used
Entering add_active_range(0, 256, 851876) 1 entries of 3200 used
SRAT: Node 0 PXM 0 0-130000000
Entering add_active_range(0, 0, 157) 2 entries of 3200 used
Entering add_active_range(0, 256, 851876) 2 entries of 3200 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000130000000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1245184
early_node_map[3] active PFN ranges
0: 0 -> 157
0: 256 -> 851876
0: 1048576 -> 1245184
On node 0 totalpages: 1048385
DMA zone: 56 pages used for memmap
DMA zone: 1661 pages reserved
DMA zone: 2280 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833500 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x488
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[16])
IOAPIC[1]: apic_id 13, address 0xfec02000, GSI 16-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x1166a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000cffa4000 - 00000000cffa5000
swsusp: Registered nosave memory region: 00000000cffa5000 - 00000000cffa7000
swsusp: Registered nosave memory region: 00000000cffa7000 - 00000000cffa8000
swsusp: Registered nosave memory region: 00000000cffa8000 - 00000000d0000000
swsusp: Registered nosave memory region: 00000000d0000000 - 00000000f4000000
swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fc000000
swsusp: Registered nosave memory region: 00000000fc000000 - 00000000fec00000
swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at d4000000 (gap: d0000000:24000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37488 bytes of per cpu data
Built 1 zonelists. Total pages: 1029700
Kernel command line: root=/dev/sda1 ro console=tty0 console=ttyS0,19200
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2400.084 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
CPU 0: aperture @ f4000000 size 64 MB
CPU 1: aperture @ f4000000 size 64 MB
Memory: 4118200k/4980736k available (3430k kernel code, 75340k reserved, 1923k data, 312k init)
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 4803.93 BogoMIPS (lpj=9607861)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12500452
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.55 BogoMIPS (lpj=9601112)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/2 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 4800.50 BogoMIPS (lpj=9601001)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 4800.53 BogoMIPS (lpj=9601073)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/3 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
Brought up 4 CPUs
migration_cost=476
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at fa000000 - fa8fffff
PCI: No mmconfig possible on device 00:18
PCI: No mmconfig possible on device 00:19
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIA.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
ACPI: PCI Interrupt Link [LPAC] (IRQs *9)
ACPI: PCI Interrupt Link [LPUS] (IRQs *4)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LPID] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LPSA] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LPSM] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP00] (IRQs *10)
ACPI: PCI Interrupt Link [LP01] (IRQs *5)
ACPI: PCI Interrupt Link [LP02] (IRQs *7)
ACPI: PCI Interrupt Link [LP03] (IRQs *9)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP06] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP08] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP09] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0A] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0B] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0C] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0D] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0E] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0F] (IRQs) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
pnp: 00:01: ioport range 0x510-0x517 has been reserved
pnp: 00:01: ioport range 0x504-0x507 has been reserved
pnp: 00:01: ioport range 0x500-0x503 has been reserved
pnp: 00:01: ioport range 0x520-0x53f has been reserved
Time: hpet clocksource has been installed.
pnp: 00:01: ioport range 0x540-0x547 has been reserved
pnp: 00:01: ioport range 0x460-0x461 has been reserved
pnp: 00:09: iomem range 0xf4000000-0xfbffffff could not be reserved
pnp: 00:09: iomem range 0xfec00000-0xffffffff could not be reserved
PCI: Bridge: 0000:01:0d.0
IO window: disabled.
MEM window: e2000000-e6ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e2000000-e7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: 4000-4fff
MEM window: df000000-e00fffff
PREFETCH window: d4000000-d40fffff
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: dd000000-ddffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:08.0
IO window: disabled.
MEM window: dc000000-dcffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: db000000-dbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: disabled.
MEM window: da000000-daffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: d9000000-d9ffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
fuse init (API version 7.8)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:05.0
PCI: Found enabled HT MSI Mapping on 0000:00:08.0
PCI: Found enabled HT MSI Mapping on 0000:00:09.0
PCI: Found enabled HT MSI Mapping on 0000:00:0a.0
PCI: Found enabled HT MSI Mapping on 0000:00:0b.0
PCI: MSI quirk detected. MSI deactivated.
PCI: Setting latency timer of device 0000:00:08.0 to 64
Allocate Port Service[0000:00:08.0:pcie01]
PCI: Setting latency timer of device 0000:00:09.0 to 64
Allocate Port Service[0000:00:09.0:pcie01]
PCI: Setting latency timer of device 0000:00:0a.0 to 64
Allocate Port Service[0000:00:0a.0:pcie01]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
Allocate Port Service[0000:00:0b.0:pcie01]
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:08.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:09.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:0a.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:0b.0:pcie01 failed with error 2
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: Processor [CPU3] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
00:02: ttyS0 at I/O 0x2e8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
nbd: registered device at major 43
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.11 (June 4, 2007)
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 17 (level, low) -> IRQ 17
eth0: Broadcom NetXtreme II BCM5706 1000Base-SX (A2) PCI-X 64-bit 133MHz found at mem e2000000, IRQ 17, node addr 00145e6d92d0
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 18 (level, low) -> IRQ 18
eth1: Broadcom NetXtreme II BCM5706 1000Base-SX (A2) PCI-X 64-bit 133MHz found at mem e4000000, IRQ 18, node addr 00145eb38f70
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org>
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level, low) -> IRQ 19
mptbase: Initiating ioc0 bringup
ioc0: SAS1064: Capabilities={Initiator}
scsi0 : ioc0: LSISAS1064, FwRev=000a0f00h, Ports=1, MaxQ=511, IRQ=19
scsi 0:0:0:0: Direct-Access IBM-ESXS MAY2073RC T107 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors (73407 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: d7 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors (73407 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: d7 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 4
ACPI: PCI Interrupt 0000:00:03.2[A] -> Link [LPUS] -> GSI 4 (level, low) -> IRQ 4
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 4, io mem 0xf3ffd000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LPUS] -> GSI 4 (level, low) -> IRQ 4
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 4, io mem 0xf3fff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LPUS] -> GSI 4 (level, low) -> IRQ 4
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 4, io mem 0xf3ffe000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 2 ports detected
usb 2-2: new full speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 2-2.1: new full speed USB device using ohci_hcd and address 3
usb 2-2.1: configuration #1 chosen from 1 choice
usb 2-2.3: new full speed USB device using ohci_hcd and address 4
usb 2-2.3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
input: IBM PPC I/F as /class/input/input1
input: USB HID v1.10 Keyboard [IBM PPC I/F] on usb-0000:00:03.0-2.1
input: IBM PPC I/F as /class/input/input2
input: USB HID v1.10 Mouse [IBM PPC I/F] on usb-0000:00:03.0-2.1
input: IBM HIDK/M as /class/input/input3
input: USB HID v1.10 Keyboard [IBM HIDK/M] on usb-0000:00:03.0-2.3
input: IBM HIDK/M as /class/input/input4
input: USB HID v1.10 Mouse [IBM HIDK/M] on usb-0000:00:03.0-2.3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Found 4 Dual-Core AMD Opteron(tm) Processor 2220 processors (version 2.00.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 312k freed
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
Buffer I/O error on device nbd0, logical block 0
Buffer I/O error on device nbd0, logical block 1
Buffer I/O error on device nbd0, logical block 2
Buffer I/O error on device nbd0, logical block 3
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
Buffer I/O error on device nbd0, logical block 0
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 4294965120
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 4294965120
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 0
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 4294965120
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 0
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 4294965120
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 0
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 4294965120
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 0
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 4294965120
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 0
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 4294965120
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 0
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 4294965120
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 0
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 4294965120
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 0
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 4294965120
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 0
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 4294965120
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 0
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 4294965120
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 0
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 4294965120
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 0
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 4294965120
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 0
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 4294965120
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 0
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 4294965120
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 0
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 0
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 0
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 0
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 0
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 0
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 0
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 0
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 0
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 0
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 0
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 0
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 0
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 0
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 0
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 0
Adding 7815612k swap on /dev/disk/by-uuid/b70fa511-1f78-4697-98d5-380d5eb6561c. Priority:-1 extents:1 across:7815612k
EXT3 FS on sda1, internal journal
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
Buffer I/O error on device nbd0, logical block 0
Buffer I/O error on device nbd0, logical block 1
Buffer I/O error on device nbd0, logical block 2
Buffer I/O error on device nbd0, logical block 3
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
Buffer I/O error on device nbd0, logical block 0
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 4294965120
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 4294965120
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 0
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 4294965120
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 0
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 4294965120
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 0
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 4294965120
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 0
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 4294965120
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 0
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 4294965120
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 0
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 4294965120
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 0
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 4294965120
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 0
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 4294965120
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 0
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 4294965120
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 0
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 4294965120
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 0
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 4294965120
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 0
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 4294965120
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 0
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 4294965120
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 0
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 4294965120
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 0
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 0
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 0
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 0
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 0
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 0
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 0
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 0
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 0
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 0
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 0
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 0
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 0
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 0
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 0
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 0
device eth1 entered promiscuous mode
ADDRCONF(NETDEV_UP): eth1: link is not ready
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
vlan0: port 1(eth1) entering learning state
vlan0: topology change detected, propagating
vlan0: port 1(eth1) entering forwarding state
vlan0: no IPv6 routers present
eth1: no IPv6 routers present
device tap0 entered promiscuous mode
vlan0: port 2(tap0) entering learning state
kvm: emulating exchange as write
kvm: 3274: cpu0 unhandled wrmsr: 0xc0010004
kvm: 3274: cpu0 unhandled wrmsr: 0xc0010000
kvm: 3274: cpu0 unhandled wrmsr: 0xc0010004
kvm: 3274: cpu0 unhandled wrmsr: 0xc0010000
vlan0: topology change detected, propagating
vlan0: port 2(tap0) entering forwarding state
tap0: no IPv6 routers present
------------[ cut here ]------------
kernel BUG at /opt/tickless/kvm-43/kernel/mmu.c:436!
invalid opcode: 0000 [1] SMP
CPU 0
Modules linked in: kvm_amd kvm
Pid: 3274, comm: qemu-system-x86 Not tainted 2.6.22 #5
RIP: 0010:[<ffffffff88007ff8>] [<ffffffff88007ff8>] :kvm:kvm_mmu_get_page+0x2d5/0x321
RSP: 0018:ffff810126f01858 EFLAGS: 00010293
RAX: 000000000011a338 RBX: 0000000000000000 RCX: ffff81012a564080
RDX: 000ffffffffff000 RSI: 000000000000c3b9 RDI: 000000000011a338
RBP: ffff8100bf57c638 R08: 0000000000000000 R09: 0000000000000004
R10: 0000000000000000 R11: ffffffff8801971c R12: ffff810103c1c0f0
R13: ffff81012fb3b440 R14: ffff810105fe8000 R15: 000000000000c3b9
FS: 0000000000000000(0000) GS:ffffffff8073b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000006b9540 CR3: 00000001276d6000 CR4: 00000000000006e0
Process qemu-system-x86 (pid: 3274, threadinfo ffff810126f00000, task ffff81012717c6b0)
Stack: 0000000000000004 0000000000000002 ffff8100c02ccff0 ffff810105fe8000
0000000000000015 00000000ffc487c3 0000000000000000 ffffffff880084cb
ffff8100c02ccff0 0000000000000000 ffff81012713c340 ffff810001025880
Call Trace:
[<ffffffff880084cb>] :kvm:paging64_page_fault+0x18f/0x27a
[<ffffffff8800a4d4>] :kvm:x86_emulate_insn+0x1bcb/0x2eb0
[<ffffffff88018cf3>] :kvm_amd:svm_vcpu_load+0x0/0x56
[<ffffffff88019797>] :kvm_amd:pf_interception+0x7b/0x100
[<ffffffff880041d8>] :kvm:kvm_vcpu_ioctl_run+0x292/0x3a3
[<ffffffff880043f6>] :kvm:kvm_vcpu_ioctl+0x10d/0xd7f
[<ffffffff8021e487>] gart_map_single+0x2c/0x6f
[<ffffffff803ea947>] bnx2_start_xmit+0x27f/0x500
[<ffffffff80288260>] do_select+0x449/0x466
[<ffffffff80288769>] __pollwait+0x0/0xe1
[<ffffffff804ea3a6>] ip_queue_xmit+0x2f1/0x344
[<ffffffff804f8cd9>] tcp_send_ack+0x23/0x102
[<ffffffff804f8bac>] tcp_transmit_skb+0x6a1/0x6de
[<ffffffff804cc8b2>] __alloc_skb+0x84/0x13c
[<ffffffff80553f0f>] _spin_lock_bh+0x9/0x19
[<ffffffff804c8c05>] release_sock+0x13/0x9b
[<ffffffff804f0cfc>] tcp_recvmsg+0x6bb/0x7ce
[<ffffffff804c8562>] sock_common_recvmsg+0x30/0x45
[<ffffffff804cdc38>] memcpy_toiovec+0x36/0x66
[<ffffffff802765e2>] add_partial+0x12/0x3f
[<ffffffff80277331>] __slab_free+0x74/0x2d4
[<ffffffff80242837>] remove_wait_queue+0x12/0x45
[<ffffffff803fa70c>] tun_chr_aio_read+0x2a9/0x2bb
[<ffffffff802884b1>] core_sys_select+0x234/0x265
[<ffffffff8024468e>] enqueue_hrtimer+0x64/0x6b
[<ffffffff80244bf4>] hrtimer_start+0xf2/0x104
[<ffffffff80239ead>] __dequeue_signal+0x19/0x15a
[<ffffffff80239953>] recalc_sigpending+0xe/0x25
[<ffffffff8023b477>] dequeue_signal+0xa5/0x126
[<ffffffff8028722f>] do_ioctl+0x2b/0xb6
[<ffffffff802874fd>] vfs_ioctl+0x243/0x25c
[<ffffffff80245c27>] getnstimeofday+0x32/0x8b
[<ffffffff80287552>] sys_ioctl+0x3c/0x5e
[<ffffffff802092de>] system_call+0x7e/0x83
Code: 0f 0b eb fe 48 8b 45 00 a8 01 75 04 0f 0b eb fe a8 02 75 04
RIP [<ffffffff88007ff8>] :kvm:kvm_mmu_get_page+0x2d5/0x321
RSP <ffff810126f01858>
[-- Attachment #3: Type: text/plain, Size: 228 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
[-- Attachment #4: Type: text/plain, Size: 186 bytes --]
_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG_ON in mmu.c:436
[not found] ` <20070923215548.GP7519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
@ 2007-09-24 2:39 ` Scott Serr
2007-09-24 7:54 ` Avi Kivity
1 sibling, 0 replies; 8+ messages in thread
From: Scott Serr @ 2007-09-24 2:39 UTC (permalink / raw)
To: Ryan Harper; +Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Hi Ryan,
I had a similar problem yesterday with Xen. I posted it to the Xen
mailing list. Now I'm hopeful of try this in KVM, but it looks like you
aren't having much luck. (stopping on anaconda rings a bell)
Here is part of my post:
Xen HVM = CentOS 4.5
running VMware Server 1.0.4 (not VMware WS 6.0 image compatible)
It will start a CentOS 4.5 install (inside VMware) but a ways into
it, it says it didn't detect any hard drives. So I choose a driver
module it suggests. A few more seconds into it I get "Running
anacoda, the CentOS-4 i386 system install - please wait..." The
cursor is flashing for about 5 seconds, then stops flashing.
VMware's VM is dead at that point.
I don't know if this helps anyone but... I guess I can commiserate.
-Scott
Ryan Harper wrote:
> I've run into a nasty bug while trying to install a Linux guest using
> VMware Server inside a kvm guest (full dmesg attached and recreate
> instructions below bug).
>
> kernel BUG at /opt/tickless/kvm-43/kernel/mmu.c:436!
> invalid opcode: 0000 [1] SMP
> CPU 0
> Modules linked in: kvm_amd kvm
> Pid: 3274, comm: qemu-system-x86 Not tainted 2.6.22-hal_x86_64 #5
> RIP: 0010:[<ffffffff88007ff8>] [<ffffffff88007ff8>] :kvm:kvm_mmu_get_page+0x2d5/0x321
> RSP: 0018:ffff810126f01858 EFLAGS: 00010293
> RAX: 000000000011a338 RBX: 0000000000000000 RCX: ffff81012a564080
> RDX: 000ffffffffff000 RSI: 000000000000c3b9 RDI: 000000000011a338
> RBP: ffff8100bf57c638 R08: 0000000000000000 R09: 0000000000000004
> R10: 0000000000000000 R11: ffffffff8801971c R12: ffff810103c1c0f0
> R13: ffff81012fb3b440 R14: ffff810105fe8000 R15: 000000000000c3b9
> FS: 0000000000000000(0000) GS:ffffffff8073b000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 00000000006b9540 CR3: 00000001276d6000 CR4: 00000000000006e0
> Process qemu-system-x86 (pid: 3274, threadinfo ffff810126f00000, task ffff81012717c6b0)
> Stack: 0000000000000004 0000000000000002 ffff8100c02ccff0 ffff810105fe8000
> 0000000000000015 00000000ffc487c3 0000000000000000 ffffffff880084cb
> ffff8100c02ccff0 0000000000000000 ffff81012713c340 ffff810001025880
> Call Trace:
> [<ffffffff880084cb>] :kvm:paging64_page_fault+0x18f/0x27a
> [<ffffffff8800a4d4>] :kvm:x86_emulate_insn+0x1bcb/0x2eb0
> [<ffffffff88018cf3>] :kvm_amd:svm_vcpu_load+0x0/0x56
> [<ffffffff88019797>] :kvm_amd:pf_interception+0x7b/0x100
> [<ffffffff880041d8>] :kvm:kvm_vcpu_ioctl_run+0x292/0x3a3
> [<ffffffff880043f6>] :kvm:kvm_vcpu_ioctl+0x10d/0xd7f
> [<ffffffff8021e487>] gart_map_single+0x2c/0x6f
> [<ffffffff803ea947>] bnx2_start_xmit+0x27f/0x500
> [<ffffffff80288260>] do_select+0x449/0x466
> [<ffffffff80288769>] __pollwait+0x0/0xe1
> [<ffffffff804ea3a6>] ip_queue_xmit+0x2f1/0x344
> [<ffffffff804f8cd9>] tcp_send_ack+0x23/0x102
> [<ffffffff804f8bac>] tcp_transmit_skb+0x6a1/0x6de
> [<ffffffff804cc8b2>] __alloc_skb+0x84/0x13c
> [<ffffffff80553f0f>] _spin_lock_bh+0x9/0x19
> [<ffffffff804c8c05>] release_sock+0x13/0x9b
> [<ffffffff804f0cfc>] tcp_recvmsg+0x6bb/0x7ce
> [<ffffffff804c8562>] sock_common_recvmsg+0x30/0x45
> [<ffffffff804cdc38>] memcpy_toiovec+0x36/0x66
> [<ffffffff802765e2>] add_partial+0x12/0x3f
> [<ffffffff80277331>] __slab_free+0x74/0x2d4
> [<ffffffff80242837>] remove_wait_queue+0x12/0x45
> [<ffffffff803fa70c>] tun_chr_aio_read+0x2a9/0x2bb
> [<ffffffff802884b1>] core_sys_select+0x234/0x265
> [<ffffffff8024468e>] enqueue_hrtimer+0x64/0x6b
> [<ffffffff80244bf4>] hrtimer_start+0xf2/0x104
> [<ffffffff80239ead>] __dequeue_signal+0x19/0x15a
> [<ffffffff80239953>] recalc_sigpending+0xe/0x25
> [<ffffffff8023b477>] dequeue_signal+0xa5/0x126
> [<ffffffff8028722f>] do_ioctl+0x2b/0xb6
> [<ffffffff802874fd>] vfs_ioctl+0x243/0x25c
> [<ffffffff80245c27>] getnstimeofday+0x32/0x8b
> [<ffffffff80287552>] sys_ioctl+0x3c/0x5e
> [<ffffffff802092de>] system_call+0x7e/0x83
>
>
> Code: 0f 0b eb fe 48 8b 45 00 a8 01 75 04 0f 0b eb fe a8 02 75 04
> RIP [<ffffffff88007ff8>] :kvm:kvm_mmu_get_page+0x2d5/0x321
> RSP <ffff810126f01858>
>
>
> Here is the setup:
>
> IBM LS21 - 2 socket AMD Host, 64-bit mode, kvm-43 on 2.6.22, 4G ram
>
> 1. Apply set_cr3 gp fault patch to kvm, rebuild and insert modules.
>
> 2. Install Ubuntu Fiesty i386 into a KVM guest
>
> 1. qemu-img create -f qcow2 vmware-server.img 50G
> 2. qemu-system-x86_64 -hda vmware-server.img -m 512 -no-rtc -net tap -net nic,model=rtl8139 -vnc :1 -cdrom /home/rharper/ubuntu-7.04-desktop-i386.iso -boot d
>
> 2. Download FC-6 i386 disc 1 from some fedora mirror
> http://mirrors.kernel.org/fedora/core/6/i386/iso/FC-6-i386-disc1.iso
>
> 3. Boot Feisty guest and install VMware Server following this guide:
> http://www.ubuntugeek.com/how-to-install-vmware-server-from-canonical-commercial-repository-in-ubuntu-feisty.html
>
> ./qemu-system-x86_64 -hda vmware-server.img -m 512 -no-rtc -net tap
> -net nic,model=rtl8139 -vnc :1 -cdrom FC-6-i386-disc1.iso -boot c
>
> 4. Reboot and Run Vmware-server tool (Applications->System Tools->VMWare
> Server Console)
>
> 5. Create New Virtual Machine:
> 1. Typical
> 2. Linux
> 3. Red Hat Linux
> 4. Default location is ok
> 5. Use NAT
> 6. 8G is fine, don't allocate and don't split into 2G
> 7. Finish
>
> 6. Stop guest and rerun qemu but with -snapshot (so I don't corrupt the
> guest disk)
>
> ./qemu-system-x86_64 -hda vmware-server.img -snapshot -m 512 -no-rtc \
> -net tap -net nic,model=rtl8139 -vnc :1 -cdrom FC-6-i386-disc1.iso
>
> 6. Power on VM
> 1. Hit enter at Fedora Boot menu
> 2. Skip disk check
> 3. Wait for anaconda to start to load - gets to a black screen
>
> At this point, sometimes the bug will trip, other times, I need to do
> some work in the host (tar tzvf kvm-43.tar.gz) a couple times and it
> trips.
>
>
> ------------------------------------------------------------------------
>
> Linux version 2.6.22 (root@leaf8) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #5 SMP Fri Aug 24 10:23:37 CDT 2007
> Command line: root=/dev/sda1 ro console=tty0 console=ttyS0,19200
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
> BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cffa44c0 (usable)
> BIOS-e820: 00000000cffa44c0 - 00000000cffa7400 (ACPI data)
> BIOS-e820: 00000000cffa7400 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000f4000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
> Entering add_active_range(0, 0, 157) 0 entries of 3200 used
> Entering add_active_range(0, 256, 851876) 1 entries of 3200 used
> Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
> end_pfn_map = 1245184
> DMI 2.3 present.
> ACPI: RSDP 000FDFE0, 0014 (r0 IBM )
> ACPI: RSDT CFFA7380, 0038 (r1 IBM SERLEWIS 1000 IBM 45444F43)
> ACPI: FACP CFFA72C0, 0084 (r2 IBM SERLEWIS 1000 IBM 45444F43)
> ACPI: DSDT CFFA44C0, 2B02 (r1 IBM SERLEWIS 1000 INTL 2002025)
> ACPI: FACS CFFA7040, 0040
> ACPI: APIC CFFA7200, 0090 (r1 IBM SERLEWIS 1000 IBM 45444F43)
> ACPI: SRAT CFFA7100, 00E8 (r1 AMD HAMMER 1 AMD 1)
> ACPI: HPET CFFA70C0, 0038 (r1 IBM SERLEWIS 1000 IBM 45444F43)
> ACPI: MCFG CFFA7080, 003C (r1 IBM SERLEWIS 1000 IBM 45444F43)
> SRAT: PXM 0 -> APIC 0 -> Node 0
> SRAT: PXM 0 -> APIC 1 -> Node 0
> SRAT: PXM 1 -> APIC 2 -> Node 1
> SRAT: PXM 1 -> APIC 3 -> Node 1
> SRAT: Node 0 PXM 0 0-a0000
> Entering add_active_range(0, 0, 157) 0 entries of 3200 used
> SRAT: Node 0 PXM 0 0-d0000000
> Entering add_active_range(0, 0, 157) 1 entries of 3200 used
> Entering add_active_range(0, 256, 851876) 1 entries of 3200 used
> SRAT: Node 0 PXM 0 0-130000000
> Entering add_active_range(0, 0, 157) 2 entries of 3200 used
> Entering add_active_range(0, 256, 851876) 2 entries of 3200 used
> Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
> NUMA: Using 63 for the hash shift.
> Bootmem setup node 0 0000000000000000-0000000130000000
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 1245184
> early_node_map[3] active PFN ranges
> 0: 0 -> 157
> 0: 256 -> 851876
> 0: 1048576 -> 1245184
> On node 0 totalpages: 1048385
> DMA zone: 56 pages used for memmap
> DMA zone: 1661 pages reserved
> DMA zone: 2280 pages, LIFO batch:0
> DMA32 zone: 14280 pages used for memmap
> DMA32 zone: 833500 pages, LIFO batch:31
> Normal zone: 2688 pages used for memmap
> Normal zone: 193920 pages, LIFO batch:31
> ACPI: PM-Timer IO Port: 0x488
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
> Processor #2
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> Processor #3
> ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-15
> ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[16])
> IOAPIC[1]: apic_id 13, address 0xfec02000, GSI 16-31
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> ACPI: HPET id: 0x1166a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000
> swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
> swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
> swsusp: Registered nosave memory region: 00000000cffa4000 - 00000000cffa5000
> swsusp: Registered nosave memory region: 00000000cffa5000 - 00000000cffa7000
> swsusp: Registered nosave memory region: 00000000cffa7000 - 00000000cffa8000
> swsusp: Registered nosave memory region: 00000000cffa8000 - 00000000d0000000
> swsusp: Registered nosave memory region: 00000000d0000000 - 00000000f4000000
> swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fc000000
> swsusp: Registered nosave memory region: 00000000fc000000 - 00000000fec00000
> swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
> Allocating PCI resources starting at d4000000 (gap: d0000000:24000000)
> SMP: Allowing 4 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 37488 bytes of per cpu data
> Built 1 zonelists. Total pages: 1029700
> Kernel command line: root=/dev/sda1 ro console=tty0 console=ttyS0,19200
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Marking TSC unstable due to TSCs unsynchronized
> time.c: Detected 2400.084 MHz processor.
> Console: colour VGA+ 80x25
> Checking aperture...
> CPU 0: aperture @ f4000000 size 64 MB
> CPU 1: aperture @ f4000000 size 64 MB
> Memory: 4118200k/4980736k available (3430k kernel code, 75340k reserved, 1923k data, 312k init)
> SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
> Calibrating delay using timer specific routine.. 4803.93 BogoMIPS (lpj=9607861)
> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 0/0 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> SMP alternatives: switching to UP code
> ACPI: Core revision 20070126
> Using local APIC timer interrupts.
> result 12500452
> Detected 12.500 MHz APIC timer.
> SMP alternatives: switching to SMP code
> Booting processor 1/4 APIC 0x2
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 4800.55 BogoMIPS (lpj=9601112)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 1/2 -> Node 0
> CPU: Physical Processor ID: 1
> CPU: Processor Core ID: 0
> Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
> SMP alternatives: switching to SMP code
> Booting processor 2/4 APIC 0x1
> Initializing CPU#2
> Calibrating delay using timer specific routine.. 4800.50 BogoMIPS (lpj=9601001)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 2/1 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
> SMP alternatives: switching to SMP code
> Booting processor 3/4 APIC 0x3
> Initializing CPU#3
> Calibrating delay using timer specific routine.. 4800.53 BogoMIPS (lpj=9601073)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 3/3 -> Node 0
> CPU: Physical Processor ID: 1
> CPU: Processor Core ID: 1
> Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
> Brought up 4 CPUs
> migration_cost=476
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Using MMCONFIG at fa000000 - fa8fffff
> PCI: No mmconfig possible on device 00:18
> PCI: No mmconfig possible on device 00:19
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIA.PCIB._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIG._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
> ACPI: PCI Interrupt Link [LPAC] (IRQs *9)
> ACPI: PCI Interrupt Link [LPUS] (IRQs *4)
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LPID] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LPSA] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LPSM] (IRQs) *0, disabled.
> ACPI: PCI Interrupt Link [LP00] (IRQs *10)
> ACPI: PCI Interrupt Link [LP01] (IRQs *5)
> ACPI: PCI Interrupt Link [LP02] (IRQs *7)
> ACPI: PCI Interrupt Link [LP03] (IRQs *9)
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP06] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP08] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP09] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP0A] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP0B] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP0C] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP0D] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP0E] (IRQs) *0, disabled.
> ACPI: Blank IRQ resource
> ACPI: Resource is not an IRQ entry
> ACPI: PCI Interrupt Link [LP0F] (IRQs) *0, disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 11 devices
> ACPI: ACPI bus type pnp unregistered
> SCSI subsystem initialized
> libata version 2.21 loaded.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> PCI-DMA: Disabling AGP.
> PCI-DMA: aperture base @ f4000000 size 65536 KB
> PCI-DMA: using GART IOMMU.
> PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> hpet0: 3 64-bit timers, 14318180 Hz
> pnp: 00:01: ioport range 0x510-0x517 has been reserved
> pnp: 00:01: ioport range 0x504-0x507 has been reserved
> pnp: 00:01: ioport range 0x500-0x503 has been reserved
> pnp: 00:01: ioport range 0x520-0x53f has been reserved
> Time: hpet clocksource has been installed.
> pnp: 00:01: ioport range 0x540-0x547 has been reserved
> pnp: 00:01: ioport range 0x460-0x461 has been reserved
> pnp: 00:09: iomem range 0xf4000000-0xfbffffff could not be reserved
> pnp: 00:09: iomem range 0xfec00000-0xffffffff could not be reserved
> PCI: Bridge: 0000:01:0d.0
> IO window: disabled.
> MEM window: e2000000-e6ffffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:01.0
> IO window: disabled.
> MEM window: e2000000-e7ffffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:06.0
> IO window: 4000-4fff
> MEM window: df000000-e00fffff
> PREFETCH window: d4000000-d40fffff
> PCI: Bridge: 0000:00:07.0
> IO window: disabled.
> MEM window: dd000000-ddffffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:08.0
> IO window: disabled.
> MEM window: dc000000-dcffffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:09.0
> IO window: disabled.
> MEM window: db000000-dbffffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:0a.0
> IO window: disabled.
> MEM window: da000000-daffffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:0b.0
> IO window: disabled.
> MEM window: d9000000-d9ffffff
> PREFETCH window: disabled.
> PCI: Setting latency timer of device 0000:00:08.0 to 64
> PCI: Setting latency timer of device 0000:00:09.0 to 64
> PCI: Setting latency timer of device 0000:00:0a.0 to 64
> PCI: Setting latency timer of device 0000:00:0b.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 524288 bind 65536)
> TCP reno registered
> Total HugeTLB memory allocated, 0
> Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
> fuse init (API version 7.8)
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> Boot video device is 0000:00:05.0
> PCI: Found enabled HT MSI Mapping on 0000:00:08.0
> PCI: Found enabled HT MSI Mapping on 0000:00:09.0
> PCI: Found enabled HT MSI Mapping on 0000:00:0a.0
> PCI: Found enabled HT MSI Mapping on 0000:00:0b.0
> PCI: MSI quirk detected. MSI deactivated.
> PCI: Setting latency timer of device 0000:00:08.0 to 64
> Allocate Port Service[0000:00:08.0:pcie01]
> PCI: Setting latency timer of device 0000:00:09.0 to 64
> Allocate Port Service[0000:00:09.0:pcie01]
> PCI: Setting latency timer of device 0000:00:0a.0 to 64
> Allocate Port Service[0000:00:0a.0:pcie01]
> PCI: Setting latency timer of device 0000:00:0b.0 to 64
> Allocate Port Service[0000:00:0b.0:pcie01]
> Evaluate _OSC Set fails. Status = 0x0005
> Evaluate _OSC Set fails. Status = 0x0005
> aer_init: AER service init fails - Run ACPI _OSC fails
> aer: probe of 0000:00:08.0:pcie01 failed with error 2
> Evaluate _OSC Set fails. Status = 0x0005
> Evaluate _OSC Set fails. Status = 0x0005
> aer_init: AER service init fails - Run ACPI _OSC fails
> aer: probe of 0000:00:09.0:pcie01 failed with error 2
> Evaluate _OSC Set fails. Status = 0x0005
> Evaluate _OSC Set fails. Status = 0x0005
> aer_init: AER service init fails - Run ACPI _OSC fails
> aer: probe of 0000:00:0a.0:pcie01 failed with error 2
> Evaluate _OSC Set fails. Status = 0x0005
> Evaluate _OSC Set fails. Status = 0x0005
> aer_init: AER service init fails - Run ACPI _OSC fails
> aer: probe of 0000:00:0b.0:pcie01 failed with error 2
> input: Power Button (FF) as /class/input/input0
> ACPI: Power Button (FF) [PWRF]
> ACPI: Processor [CPU0] (supports 8 throttling states)
> ACPI: Processor [CPU1] (supports 8 throttling states)
> ACPI: Processor [CPU2] (supports 8 throttling states)
> ACPI: Processor [CPU3] (supports 8 throttling states)
> Real Time Clock Driver v1.12ac
> hpet_resources: 0xfed00000 is busy
> Linux agpgart interface v0.102 (c) Dave Jones
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> 00:02: ttyS0 at I/O 0x2e8 (irq = 3) is a 16550A
> Floppy drive(s): fd0 is 1.44M
> floppy0: no floppy controllers found
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: module loaded
> nbd: registered device at major 43
> Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
> Copyright (c) 1999-2006 Intel Corporation.
> e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
> e100: Copyright(c) 1999-2006 Intel Corporation
> Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.11 (June 4, 2007)
> ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 17 (level, low) -> IRQ 17
> eth0: Broadcom NetXtreme II BCM5706 1000Base-SX (A2) PCI-X 64-bit 133MHz found at mem e2000000, IRQ 17, node addr 00145e6d92d0
> ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 18 (level, low) -> IRQ 18
> eth1: Broadcom NetXtreme II BCM5706 1000Base-SX (A2) PCI-X 64-bit 133MHz found at mem e4000000, IRQ 18, node addr 00145eb38f70
> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
> tun: Universal TUN/TAP device driver, 1.6
> tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org>
> netconsole: not configured, aborting
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
> megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
> megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
> Fusion MPT base driver 3.04.04
> Copyright (c) 1999-2007 LSI Logic Corporation
> Fusion MPT SPI Host driver 3.04.04
> Fusion MPT SAS Host driver 3.04.04
> ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level, low) -> IRQ 19
> mptbase: Initiating ioc0 bringup
> ioc0: SAS1064: Capabilities={Initiator}
> scsi0 : ioc0: LSISAS1064, FwRev=000a0f00h, Ports=1, MaxQ=511, IRQ=19
> scsi 0:0:0:0: Direct-Access IBM-ESXS MAY2073RC T107 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors (73407 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: d7 00 00 08
> sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors (73407 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: d7 00 00 08
> sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
> sd 0:0:0:0: [sda] Attached SCSI disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> ieee1394: raw1394: /dev/raw1394 device initialized
> ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 4
> ACPI: PCI Interrupt 0000:00:03.2[A] -> Link [LPUS] -> GSI 4 (level, low) -> IRQ 4
> ehci_hcd 0000:00:03.2: EHCI Host Controller
> ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:03.2: irq 4, io mem 0xf3ffd000
> ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 4 ports detected
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LPUS] -> GSI 4 (level, low) -> IRQ 4
> ohci_hcd 0000:00:03.0: OHCI Host Controller
> ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:03.0: irq 4, io mem 0xf3fff000
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LPUS] -> GSI 4 (level, low) -> IRQ 4
> ohci_hcd 0000:00:03.1: OHCI Host Controller
> ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:03.1: irq 4, io mem 0xf3ffe000
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> USB Universal Host Controller Interface driver v3.0
> usb 1-4: new high speed USB device using ehci_hcd and address 3
> usb 1-4: configuration #1 chosen from 1 choice
> hub 1-4:1.0: USB hub found
> hub 1-4:1.0: 2 ports detected
> usb 2-2: new full speed USB device using ohci_hcd and address 2
> usb 2-2: configuration #1 chosen from 1 choice
> hub 2-2:1.0: USB hub found
> hub 2-2:1.0: 4 ports detected
> usb 2-2.1: new full speed USB device using ohci_hcd and address 3
> usb 2-2.1: configuration #1 chosen from 1 choice
> usb 2-2.3: new full speed USB device using ohci_hcd and address 4
> usb 2-2.3: configuration #1 chosen from 1 choice
> usbcore: registered new interface driver usblp
> drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> Initializing USB Mass Storage driver...
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
> input: IBM PPC I/F as /class/input/input1
> input: USB HID v1.10 Keyboard [IBM PPC I/F] on usb-0000:00:03.0-2.1
> input: IBM PPC I/F as /class/input/input2
> input: USB HID v1.10 Mouse [IBM PPC I/F] on usb-0000:00:03.0-2.1
> input: IBM HIDK/M as /class/input/input3
> input: USB HID v1.10 Keyboard [IBM HIDK/M] on usb-0000:00:03.0-2.3
> input: IBM HIDK/M as /class/input/input4
> input: USB HID v1.10 Mouse [IBM HIDK/M] on usb-0000:00:03.0-2.3
> usbcore: registered new interface driver usbhid
> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> oprofile: using NMI interrupt.
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 10
> IPv6 over IPv4 tunneling driver
> NET: Registered protocol family 17
> powernow-k8: Found 4 Dual-Core AMD Opteron(tm) Processor 2220 processors (version 2.00.00)
> powernow-k8: MP systems not supported by PSB BIOS structure
> powernow-k8: MP systems not supported by PSB BIOS structure
> powernow-k8: MP systems not supported by PSB BIOS structure
> powernow-k8: MP systems not supported by PSB BIOS structure
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 312k freed
> nbd0: Attempted send on closed socket
> end_request: I/O error, dev nbd0, sector 0
> Buffer I/O error on device nbd0, logical block 0
> Buffer I/O error on device nbd0, logical block 1
> Buffer I/O error on device nbd0, logical block 2
> Buffer I/O error on device nbd0, logical block 3
> nbd0: Attempted send on closed socket
> end_request: I/O error, dev nbd0, sector 0
> Buffer I/O error on device nbd0, logical block 0
> nbd0: Attempted send on closed socket
> end_request: I/O error, dev nbd0, sector 4294965120
> nbd0: Attempted send on closed socket
> end_request: I/O error, dev nbd0, sector 0
> nbd1: Attempted send on closed socket
> end_request: I/O error, dev nbd1, sector 4294965120
> nbd1: Attempted send on closed socket
> end_request: I/O error, dev nbd1, sector 0
> nbd2: Attempted send on closed socket
> end_request: I/O error, dev nbd2, sector 4294965120
> nbd2: Attempted send on closed socket
> end_request: I/O error, dev nbd2, sector 0
> nbd3: Attempted send on closed socket
> end_request: I/O error, dev nbd3, sector 4294965120
> nbd3: Attempted send on closed socket
> end_request: I/O error, dev nbd3, sector 0
> nbd4: Attempted send on closed socket
> end_request: I/O error, dev nbd4, sector 4294965120
> nbd4: Attempted send on closed socket
> end_request: I/O error, dev nbd4, sector 0
> nbd5: Attempted send on closed socket
> end_request: I/O error, dev nbd5, sector 4294965120
> nbd5: Attempted send on closed socket
> end_request: I/O error, dev nbd5, sector 0
> nbd6: Attempted send on closed socket
> end_request: I/O error, dev nbd6, sector 4294965120
> nbd6: Attempted send on closed socket
> end_request: I/O error, dev nbd6, sector 0
> nbd7: Attempted send on closed socket
> end_request: I/O error, dev nbd7, sector 4294965120
> nbd7: Attempted send on closed socket
> end_request: I/O error, dev nbd7, sector 0
> nbd8: Attempted send on closed socket
> end_request: I/O error, dev nbd8, sector 4294965120
> nbd8: Attempted send on closed socket
> end_request: I/O error, dev nbd8, sector 0
> nbd9: Attempted send on closed socket
> end_request: I/O error, dev nbd9, sector 4294965120
> nbd9: Attempted send on closed socket
> end_request: I/O error, dev nbd9, sector 0
> nbd10: Attempted send on closed socket
> end_request: I/O error, dev nbd10, sector 4294965120
> nbd10: Attempted send on closed socket
> end_request: I/O error, dev nbd10, sector 0
> nbd11: Attempted send on closed socket
> end_request: I/O error, dev nbd11, sector 4294965120
> nbd11: Attempted send on closed socket
> end_request: I/O error, dev nbd11, sector 0
> nbd12: Attempted send on closed socket
> end_request: I/O error, dev nbd12, sector 4294965120
> nbd12: Attempted send on closed socket
> end_request: I/O error, dev nbd12, sector 0
> nbd13: Attempted send on closed socket
> end_request: I/O error, dev nbd13, sector 4294965120
> nbd13: Attempted send on closed socket
> end_request: I/O error, dev nbd13, sector 0
> nbd14: Attempted send on closed socket
> end_request: I/O error, dev nbd14, sector 4294965120
> nbd14: Attempted send on closed socket
> end_request: I/O error, dev nbd14, sector 0
> nbd15: Attempted send on closed socket
> end_request: I/O error, dev nbd15, sector 4294965120
> nbd15: Attempted send on closed socket
> end_request: I/O error, dev nbd15, sector 0
> nbd0: Attempted send on closed socket
> end_request: I/O error, dev nbd0, sector 0
> nbd1: Attempted send on closed socket
> end_request: I/O error, dev nbd1, sector 0
> nbd2: Attempted send on closed socket
> end_request: I/O error, dev nbd2, sector 0
> nbd3: Attempted send on closed socket
> end_request: I/O error, dev nbd3, sector 0
> nbd4: Attempted send on closed socket
> end_request: I/O error, dev nbd4, sector 0
> nbd5: Attempted send on closed socket
> end_request: I/O error, dev nbd5, sector 0
> nbd6: Attempted send on closed socket
> end_request: I/O error, dev nbd6, sector 0
> nbd7: Attempted send on closed socket
> end_request: I/O error, dev nbd7, sector 0
> nbd8: Attempted send on closed socket
> end_request: I/O error, dev nbd8, sector 0
> nbd9: Attempted send on closed socket
> end_request: I/O error, dev nbd9, sector 0
> nbd10: Attempted send on closed socket
> end_request: I/O error, dev nbd10, sector 0
> nbd11: Attempted send on closed socket
> end_request: I/O error, dev nbd11, sector 0
> nbd12: Attempted send on closed socket
> end_request: I/O error, dev nbd12, sector 0
> nbd13: Attempted send on closed socket
> end_request: I/O error, dev nbd13, sector 0
> nbd14: Attempted send on closed socket
> end_request: I/O error, dev nbd14, sector 0
> nbd15: Attempted send on closed socket
> end_request: I/O error, dev nbd15, sector 0
> Adding 7815612k swap on /dev/disk/by-uuid/b70fa511-1f78-4697-98d5-380d5eb6561c. Priority:-1 extents:1 across:7815612k
> EXT3 FS on sda1, internal journal
> nbd0: Attempted send on closed socket
> end_request: I/O error, dev nbd0, sector 0
> Buffer I/O error on device nbd0, logical block 0
> Buffer I/O error on device nbd0, logical block 1
> Buffer I/O error on device nbd0, logical block 2
> Buffer I/O error on device nbd0, logical block 3
> nbd0: Attempted send on closed socket
> end_request: I/O error, dev nbd0, sector 0
> Buffer I/O error on device nbd0, logical block 0
> nbd0: Attempted send on closed socket
> end_request: I/O error, dev nbd0, sector 4294965120
> nbd0: Attempted send on closed socket
> end_request: I/O error, dev nbd0, sector 0
> nbd1: Attempted send on closed socket
> end_request: I/O error, dev nbd1, sector 4294965120
> nbd1: Attempted send on closed socket
> end_request: I/O error, dev nbd1, sector 0
> nbd2: Attempted send on closed socket
> end_request: I/O error, dev nbd2, sector 4294965120
> nbd2: Attempted send on closed socket
> end_request: I/O error, dev nbd2, sector 0
> nbd3: Attempted send on closed socket
> end_request: I/O error, dev nbd3, sector 4294965120
> nbd3: Attempted send on closed socket
> end_request: I/O error, dev nbd3, sector 0
> nbd4: Attempted send on closed socket
> end_request: I/O error, dev nbd4, sector 4294965120
> nbd4: Attempted send on closed socket
> end_request: I/O error, dev nbd4, sector 0
> nbd5: Attempted send on closed socket
> end_request: I/O error, dev nbd5, sector 4294965120
> nbd5: Attempted send on closed socket
> end_request: I/O error, dev nbd5, sector 0
> nbd6: Attempted send on closed socket
> end_request: I/O error, dev nbd6, sector 4294965120
> nbd6: Attempted send on closed socket
> end_request: I/O error, dev nbd6, sector 0
> nbd7: Attempted send on closed socket
> end_request: I/O error, dev nbd7, sector 4294965120
> nbd7: Attempted send on closed socket
> end_request: I/O error, dev nbd7, sector 0
> nbd8: Attempted send on closed socket
> end_request: I/O error, dev nbd8, sector 4294965120
> nbd8: Attempted send on closed socket
> end_request: I/O error, dev nbd8, sector 0
> nbd9: Attempted send on closed socket
> end_request: I/O error, dev nbd9, sector 4294965120
> nbd9: Attempted send on closed socket
> end_request: I/O error, dev nbd9, sector 0
> nbd10: Attempted send on closed socket
> end_request: I/O error, dev nbd10, sector 4294965120
> nbd10: Attempted send on closed socket
> end_request: I/O error, dev nbd10, sector 0
> nbd11: Attempted send on closed socket
> end_request: I/O error, dev nbd11, sector 4294965120
> nbd11: Attempted send on closed socket
> end_request: I/O error, dev nbd11, sector 0
> nbd12: Attempted send on closed socket
> end_request: I/O error, dev nbd12, sector 4294965120
> nbd12: Attempted send on closed socket
> end_request: I/O error, dev nbd12, sector 0
> nbd13: Attempted send on closed socket
> end_request: I/O error, dev nbd13, sector 4294965120
> nbd13: Attempted send on closed socket
> end_request: I/O error, dev nbd13, sector 0
> nbd14: Attempted send on closed socket
> end_request: I/O error, dev nbd14, sector 4294965120
> nbd14: Attempted send on closed socket
> end_request: I/O error, dev nbd14, sector 0
> nbd15: Attempted send on closed socket
> end_request: I/O error, dev nbd15, sector 4294965120
> nbd15: Attempted send on closed socket
> end_request: I/O error, dev nbd15, sector 0
> nbd0: Attempted send on closed socket
> end_request: I/O error, dev nbd0, sector 0
> nbd1: Attempted send on closed socket
> end_request: I/O error, dev nbd1, sector 0
> nbd2: Attempted send on closed socket
> end_request: I/O error, dev nbd2, sector 0
> nbd3: Attempted send on closed socket
> end_request: I/O error, dev nbd3, sector 0
> nbd4: Attempted send on closed socket
> end_request: I/O error, dev nbd4, sector 0
> nbd5: Attempted send on closed socket
> end_request: I/O error, dev nbd5, sector 0
> nbd6: Attempted send on closed socket
> end_request: I/O error, dev nbd6, sector 0
> nbd7: Attempted send on closed socket
> end_request: I/O error, dev nbd7, sector 0
> nbd8: Attempted send on closed socket
> end_request: I/O error, dev nbd8, sector 0
> nbd9: Attempted send on closed socket
> end_request: I/O error, dev nbd9, sector 0
> nbd10: Attempted send on closed socket
> end_request: I/O error, dev nbd10, sector 0
> nbd11: Attempted send on closed socket
> end_request: I/O error, dev nbd11, sector 0
> nbd12: Attempted send on closed socket
> end_request: I/O error, dev nbd12, sector 0
> nbd13: Attempted send on closed socket
> end_request: I/O error, dev nbd13, sector 0
> nbd14: Attempted send on closed socket
> end_request: I/O error, dev nbd14, sector 0
> nbd15: Attempted send on closed socket
> end_request: I/O error, dev nbd15, sector 0
> device eth1 entered promiscuous mode
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
> ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> vlan0: port 1(eth1) entering learning state
> vlan0: topology change detected, propagating
> vlan0: port 1(eth1) entering forwarding state
> vlan0: no IPv6 routers present
> eth1: no IPv6 routers present
> device tap0 entered promiscuous mode
> vlan0: port 2(tap0) entering learning state
> kvm: emulating exchange as write
> kvm: 3274: cpu0 unhandled wrmsr: 0xc0010004
> kvm: 3274: cpu0 unhandled wrmsr: 0xc0010000
> kvm: 3274: cpu0 unhandled wrmsr: 0xc0010004
> kvm: 3274: cpu0 unhandled wrmsr: 0xc0010000
> vlan0: topology change detected, propagating
> vlan0: port 2(tap0) entering forwarding state
> tap0: no IPv6 routers present
> ------------[ cut here ]------------
> kernel BUG at /opt/tickless/kvm-43/kernel/mmu.c:436!
> invalid opcode: 0000 [1] SMP
> CPU 0
> Modules linked in: kvm_amd kvm
> Pid: 3274, comm: qemu-system-x86 Not tainted 2.6.22 #5
> RIP: 0010:[<ffffffff88007ff8>] [<ffffffff88007ff8>] :kvm:kvm_mmu_get_page+0x2d5/0x321
> RSP: 0018:ffff810126f01858 EFLAGS: 00010293
> RAX: 000000000011a338 RBX: 0000000000000000 RCX: ffff81012a564080
> RDX: 000ffffffffff000 RSI: 000000000000c3b9 RDI: 000000000011a338
> RBP: ffff8100bf57c638 R08: 0000000000000000 R09: 0000000000000004
> R10: 0000000000000000 R11: ffffffff8801971c R12: ffff810103c1c0f0
> R13: ffff81012fb3b440 R14: ffff810105fe8000 R15: 000000000000c3b9
> FS: 0000000000000000(0000) GS:ffffffff8073b000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 00000000006b9540 CR3: 00000001276d6000 CR4: 00000000000006e0
> Process qemu-system-x86 (pid: 3274, threadinfo ffff810126f00000, task ffff81012717c6b0)
> Stack: 0000000000000004 0000000000000002 ffff8100c02ccff0 ffff810105fe8000
> 0000000000000015 00000000ffc487c3 0000000000000000 ffffffff880084cb
> ffff8100c02ccff0 0000000000000000 ffff81012713c340 ffff810001025880
> Call Trace:
> [<ffffffff880084cb>] :kvm:paging64_page_fault+0x18f/0x27a
> [<ffffffff8800a4d4>] :kvm:x86_emulate_insn+0x1bcb/0x2eb0
> [<ffffffff88018cf3>] :kvm_amd:svm_vcpu_load+0x0/0x56
> [<ffffffff88019797>] :kvm_amd:pf_interception+0x7b/0x100
> [<ffffffff880041d8>] :kvm:kvm_vcpu_ioctl_run+0x292/0x3a3
> [<ffffffff880043f6>] :kvm:kvm_vcpu_ioctl+0x10d/0xd7f
> [<ffffffff8021e487>] gart_map_single+0x2c/0x6f
> [<ffffffff803ea947>] bnx2_start_xmit+0x27f/0x500
> [<ffffffff80288260>] do_select+0x449/0x466
> [<ffffffff80288769>] __pollwait+0x0/0xe1
> [<ffffffff804ea3a6>] ip_queue_xmit+0x2f1/0x344
> [<ffffffff804f8cd9>] tcp_send_ack+0x23/0x102
> [<ffffffff804f8bac>] tcp_transmit_skb+0x6a1/0x6de
> [<ffffffff804cc8b2>] __alloc_skb+0x84/0x13c
> [<ffffffff80553f0f>] _spin_lock_bh+0x9/0x19
> [<ffffffff804c8c05>] release_sock+0x13/0x9b
> [<ffffffff804f0cfc>] tcp_recvmsg+0x6bb/0x7ce
> [<ffffffff804c8562>] sock_common_recvmsg+0x30/0x45
> [<ffffffff804cdc38>] memcpy_toiovec+0x36/0x66
> [<ffffffff802765e2>] add_partial+0x12/0x3f
> [<ffffffff80277331>] __slab_free+0x74/0x2d4
> [<ffffffff80242837>] remove_wait_queue+0x12/0x45
> [<ffffffff803fa70c>] tun_chr_aio_read+0x2a9/0x2bb
> [<ffffffff802884b1>] core_sys_select+0x234/0x265
> [<ffffffff8024468e>] enqueue_hrtimer+0x64/0x6b
> [<ffffffff80244bf4>] hrtimer_start+0xf2/0x104
> [<ffffffff80239ead>] __dequeue_signal+0x19/0x15a
> [<ffffffff80239953>] recalc_sigpending+0xe/0x25
> [<ffffffff8023b477>] dequeue_signal+0xa5/0x126
> [<ffffffff8028722f>] do_ioctl+0x2b/0xb6
> [<ffffffff802874fd>] vfs_ioctl+0x243/0x25c
> [<ffffffff80245c27>] getnstimeofday+0x32/0x8b
> [<ffffffff80287552>] sys_ioctl+0x3c/0x5e
> [<ffffffff802092de>] system_call+0x7e/0x83
>
>
> Code: 0f 0b eb fe 48 8b 45 00 a8 01 75 04 0f 0b eb fe a8 02 75 04
> RIP [<ffffffff88007ff8>] :kvm:kvm_mmu_get_page+0x2d5/0x321
> RSP <ffff810126f01858>
>
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> ------------------------------------------------------------------------
>
> _______________________________________________
> kvm-devel mailing list
> kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/kvm-devel
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG_ON in mmu.c:436
[not found] ` <20070923215548.GP7519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2007-09-24 2:39 ` Scott Serr
@ 2007-09-24 7:54 ` Avi Kivity
[not found] ` <46F76D46.7040502-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
1 sibling, 1 reply; 8+ messages in thread
From: Avi Kivity @ 2007-09-24 7:54 UTC (permalink / raw)
To: Ryan Harper; +Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Ryan Harper wrote:
> I've run into a nasty bug while trying to install a Linux guest using
> VMware Server inside a kvm guest (full dmesg attached and recreate
> instructions below bug).
>
>
Can you reproduce this with AUDIT turned on (top of mmu.c)? AUDIT is
very slow, so it's recommended to reduce guest memory as much as possible.
--
error compiling committee.c: too many arguments to function
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG_ON in mmu.c:436
[not found] ` <46F76D46.7040502-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
@ 2007-09-24 21:26 ` Ryan Harper
[not found] ` <20070924212649.GS7519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: Ryan Harper @ 2007-09-24 21:26 UTC (permalink / raw)
To: Avi Kivity; +Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Ryan Harper
* Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org> [2007-09-24 02:57]:
> Ryan Harper wrote:
> >I've run into a nasty bug while trying to install a Linux guest using
> >VMware Server inside a kvm guest (full dmesg attached and recreate
> >instructions below bug).
> >
> >
>
> Can you reproduce this with AUDIT turned on (top of mmu.c)? AUDIT is
> very slow, so it's recommended to reduce guest memory as much as possible.
Working on it -- running for the better part of today with 256MB and I'm
still booting up the guest. I'll let you know how things go tomorrow.
Any thoughts on how to speed audit runs up other than lower guest
memory?
--
Ryan Harper
Software Engineer; Linux Technology Center
IBM Corp., Austin, Tx
(512) 838-9253 T/L: 678-9253
ryanh-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG_ON in mmu.c:436
[not found] ` <20070924212649.GS7519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
@ 2007-09-24 21:37 ` Anthony Liguori
[not found] ` <46F82E36.7000402-rdkfGonbjUSkNkDKm+mE6A@public.gmane.org>
2007-09-25 8:00 ` Avi Kivity
1 sibling, 1 reply; 8+ messages in thread
From: Anthony Liguori @ 2007-09-24 21:37 UTC (permalink / raw)
To: Ryan Harper; +Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Avi Kivity
Ryan Harper wrote:
> * Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org> [2007-09-24 02:57]:
>
>> Ryan Harper wrote:
>>
>>> I've run into a nasty bug while trying to install a Linux guest using
>>> VMware Server inside a kvm guest (full dmesg attached and recreate
>>> instructions below bug).
>>>
>>>
>>>
>> Can you reproduce this with AUDIT turned on (top of mmu.c)? AUDIT is
>> very slow, so it's recommended to reduce guest memory as much as possible.
>>
>
> Working on it -- running for the better part of today with 256MB and I'm
> still booting up the guest. I'll let you know how things go tomorrow.
> Any thoughts on how to speed audit runs up other than lower guest
> memory?
>
savevm right before you're about to launch your test w/o audit enabled.
then launch with loadvm and audit enabled and hit <enter> to launch your
test.
Regards,
Anthony Liguori
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG_ON in mmu.c:436
[not found] ` <20070924212649.GS7519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2007-09-24 21:37 ` Anthony Liguori
@ 2007-09-25 8:00 ` Avi Kivity
1 sibling, 0 replies; 8+ messages in thread
From: Avi Kivity @ 2007-09-25 8:00 UTC (permalink / raw)
To: Ryan Harper; +Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Ryan Harper wrote:
> * Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org> [2007-09-24 02:57]:
>
>> Ryan Harper wrote:
>>
>>> I've run into a nasty bug while trying to install a Linux guest using
>>> VMware Server inside a kvm guest (full dmesg attached and recreate
>>> instructions below bug).
>>>
>>>
>>>
>> Can you reproduce this with AUDIT turned on (top of mmu.c)? AUDIT is
>> very slow, so it's recommended to reduce guest memory as much as possible.
>>
>
> Working on it -- running for the better part of today with 256MB and I'm
> still booting up the guest. I'll let you know how things go tomorrow.
> Any thoughts on how to speed audit runs up other than lower guest
> memory?
>
Hmm. Reduce the number of shadow page tables (KVM_NUM_MMU_PAGES). You
can also turn a few passes off in the main audit function, but that of
course reduces its effectiveness.
btw, the error may occur before the guest fails, so keep an eye on
dmesg. Once it hits things will slow down even more due to a flood of
printks.
--
Do not meddle in the internals of kernels, for they are subtle and quick to panic.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG_ON in mmu.c:436
[not found] ` <46F82E36.7000402-rdkfGonbjUSkNkDKm+mE6A@public.gmane.org>
@ 2007-09-28 18:19 ` Ryan Harper
[not found] ` <20070928181915.GH7519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
0 siblings, 1 reply; 8+ messages in thread
From: Ryan Harper @ 2007-09-28 18:19 UTC (permalink / raw)
To: Anthony Liguori
Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Ryan Harper,
Avi Kivity
[-- Attachment #1: Type: text/plain, Size: 7435 bytes --]
* Anthony Liguori <anthony-rdkfGonbjUSkNkDKm+mE6A@public.gmane.org> [2007-09-24 16:39]:
> Ryan Harper wrote:
> >* Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org> [2007-09-24 02:57]:
> >
> >>Ryan Harper wrote:
> >>
> >>>I've run into a nasty bug while trying to install a Linux guest using
> >>>VMware Server inside a kvm guest (full dmesg attached and recreate
> >>>instructions below bug).
> >>>
> >>>
> >>>
> >>Can you reproduce this with AUDIT turned on (top of mmu.c)? AUDIT is
> >>very slow, so it's recommended to reduce guest memory as much as possible.
> >>
> >
> >Working on it -- running for the better part of today with 256MB and I'm
> >still booting up the guest. I'll let you know how things go tomorrow.
> >Any thoughts on how to speed audit runs up other than lower guest
> >memory?
> >
>
> savevm right before you're about to launch your test w/o audit enabled.
> then launch with loadvm and audit enabled and hit <enter> to launch your
> test.
That was highly effective in getting as close to the fault as possible.
I ended up removing all callers to kvm_mmu_audit() and added one to
mmu.c:rmap_write_protect() write before the BUG_ON() fires. Here is the
kvm_mmu_audit() output the crash generates:
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 5297 role 112
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d52 role 112
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 659b role 12
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 151f9 role 112
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 8844 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d4e role 12
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 529e role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 529f role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 528c role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 52a3 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 65a4 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 528e role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d5b role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d46 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 7e83 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn b2ce role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 52a2 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 9301 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 15bd role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 8a62 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 8a5f role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 5297 role 12
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 528b role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 52a4 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d57 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 52a0 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 4f03 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 4f03 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 4f02 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 4f02 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 8a3d role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d4e role 12
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 5297 role 12
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn bf80 role 22
general protection fault: 0000 [1] SMP
CPU 3
Modules linked in: kvm_amd kvm
Pid: 3269, comm: qemu-system-x86 Not tainted 2.6.22 #5
RIP: 0010:[<ffffffff88006f44>] [<ffffffff88006f44>] :kvm:audit_mappings_page+0x4f/0x115
RSP: 0018:ffff8101265df8c8 EFLAGS: 00010216
RAX: ffff810000000000 RBX: 0000000000000000 RCX: 0000000000000015
RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffff810105842000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000004
R10: 0000000000000046 R11: ffffffff8021ae52 R12: ffff810105842000
R13: ffff810105842000 R14: 000f80fffffff000 R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffff81012bd01780(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000000047d670 CR3: 00000001265cd000 CR4: 00000000000006e0
Process qemu-system-x86 (pid: 3269, threadinfo ffff8101265de000, task ffff81012ae1a6b0)
Stack: 0000000000000000 0000000000000a5e ffff8100c9438e10 0000000000200000
0000000000000000 0000000000000000 0000000000000000 ffff8100c9b32f00
ffff810105842000 ffff8100c949b078 ffff81012fb49fa0 ffffffff880082c1
Call Trace:
[<ffffffff880082c1>] :kvm:kvm_mmu_get_page+0x489/0x518
[<ffffffff88008815>] :kvm:kvm_mmu_load+0xe6/0x178
[<ffffffff880040b4>] :kvm:kvm_vcpu_ioctl_run+0x16e/0x3a3
[<ffffffff880043f6>] :kvm:kvm_vcpu_ioctl+0x10d/0xd7f
[<ffffffff803898d3>] tty_ldisc_deref+0x62/0x75
[<ffffffff8038aa87>] tty_poll+0x5f/0x6d
[<ffffffff80288260>] do_select+0x449/0x466
[<ffffffff80288769>] __pollwait+0x0/0xe1
[<ffffffff804f8bac>] tcp_transmit_skb+0x6a1/0x6de
[<ffffffff8023934d>] __mod_timer+0xb6/0xc4
[<ffffffff804fa8b1>] __tcp_push_pending_frames+0x7c0/0x889
[<ffffffff804cc8b2>] __alloc_skb+0x84/0x13c
[<ffffffff80553f0f>] _spin_lock_bh+0x9/0x19
[<ffffffff804c8c05>] release_sock+0x13/0x9b
[<ffffffff804f039a>] tcp_sendmsg+0x96d/0xa71
[<ffffffff804c6fce>] sock_sendmsg+0xcb/0xe3
[<ffffffff802426ba>] autoremove_wake_function+0x0/0x2e
[<ffffffff802884b1>] core_sys_select+0x234/0x265
[<ffffffff8034bec4>] rb_insert_color+0xb2/0xda
[<ffffffff8024468e>] enqueue_hrtimer+0x64/0x6b
[<ffffffff80244bf4>] hrtimer_start+0xf2/0x104
[<ffffffff80239ead>] __dequeue_signal+0x19/0x15a
[<ffffffff80239953>] recalc_sigpending+0xe/0x25
[<ffffffff8023b477>] dequeue_signal+0xa5/0x126
[<ffffffff8028722f>] do_ioctl+0x2b/0xb6
[<ffffffff802874fd>] vfs_ioctl+0x243/0x25c
[<ffffffff80245c27>] getnstimeofday+0x32/0x8b
[<ffffffff80287552>] sys_ioctl+0x3c/0x5e
[<ffffffff802092de>] system_call+0x7e/0x83
Code: 49 8b 2e 48 89 e8 83 e0 01 48 89 44 24 10 0f 84 85 00 00 00
RIP [<ffffffff88006f44>] :kvm:audit_mappings_page+0x4f/0x115
RSP <ffff8101265df8c8>
--
Ryan Harper
Software Engineer; Linux Technology Center
IBM Corp., Austin, Tx
(512) 838-9253 T/L: 678-9253
ryanh-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org
[-- Attachment #2: kvm_audit.dmesg --]
[-- Type: text/plain, Size: 36445 bytes --]
Linux version 2.6.22 (root@leaf8) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #5 SMP Fri Aug 24 10:23:37 CDT 2007
Command line: root=/dev/sda1 ro console=tty0 console=ttyS0,19200
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffa44c0 (usable)
BIOS-e820: 00000000cffa44c0 - 00000000cffa7400 (ACPI data)
BIOS-e820: 00000000cffa7400 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f4000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 851876) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
end_pfn_map = 1245184
DMI 2.3 present.
ACPI: RSDP 000FDFE0, 0014 (r0 IBM )
ACPI: RSDT CFFA7380, 0038 (r1 IBM SERLEWIS 1000 IBM 45444F43)
ACPI: FACP CFFA72C0, 0084 (r2 IBM SERLEWIS 1000 IBM 45444F43)
ACPI: DSDT CFFA44C0, 2B02 (r1 IBM SERLEWIS 1000 INTL 2002025)
ACPI: FACS CFFA7040, 0040
ACPI: APIC CFFA7200, 0090 (r1 IBM SERLEWIS 1000 IBM 45444F43)
ACPI: SRAT CFFA7100, 00E8 (r1 AMD HAMMER 1 AMD 1)
ACPI: HPET CFFA70C0, 0038 (r1 IBM SERLEWIS 1000 IBM 45444F43)
ACPI: MCFG CFFA7080, 003C (r1 IBM SERLEWIS 1000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-d0000000
Entering add_active_range(0, 0, 157) 1 entries of 3200 used
Entering add_active_range(0, 256, 851876) 1 entries of 3200 used
SRAT: Node 0 PXM 0 0-130000000
Entering add_active_range(0, 0, 157) 2 entries of 3200 used
Entering add_active_range(0, 256, 851876) 2 entries of 3200 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000130000000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1245184
early_node_map[3] active PFN ranges
0: 0 -> 157
0: 256 -> 851876
0: 1048576 -> 1245184
On node 0 totalpages: 1048385
DMA zone: 56 pages used for memmap
DMA zone: 1661 pages reserved
DMA zone: 2280 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833500 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x488
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[16])
IOAPIC[1]: apic_id 13, address 0xfec02000, GSI 16-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x1166a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000cffa4000 - 00000000cffa5000
swsusp: Registered nosave memory region: 00000000cffa5000 - 00000000cffa7000
swsusp: Registered nosave memory region: 00000000cffa7000 - 00000000cffa8000
swsusp: Registered nosave memory region: 00000000cffa8000 - 00000000d0000000
swsusp: Registered nosave memory region: 00000000d0000000 - 00000000f4000000
swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fc000000
swsusp: Registered nosave memory region: 00000000fc000000 - 00000000fec00000
swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at d4000000 (gap: d0000000:24000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37488 bytes of per cpu data
Built 1 zonelists. Total pages: 1029700
Kernel command line: root=/dev/sda1 ro console=tty0 console=ttyS0,19200
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2400.085 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
CPU 0: aperture @ f4000000 size 64 MB
CPU 1: aperture @ f4000000 size 64 MB
Memory: 4118200k/4980736k available (3430k kernel code, 75340k reserved, 1923k data, 312k init)
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 4803.61 BogoMIPS (lpj=9607238)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12500456
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.54 BogoMIPS (lpj=9601089)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/2 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 4800.53 BogoMIPS (lpj=9601076)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 4800.53 BogoMIPS (lpj=9601077)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/3 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
Brought up 4 CPUs
migration_cost=475
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at fa000000 - fa8fffff
PCI: No mmconfig possible on device 00:18
PCI: No mmconfig possible on device 00:19
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIA.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
ACPI: PCI Interrupt Link [LPAC] (IRQs *9)
ACPI: PCI Interrupt Link [LPUS] (IRQs *4)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LPID] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LPSA] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LPSM] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP00] (IRQs *10)
ACPI: PCI Interrupt Link [LP01] (IRQs *5)
ACPI: PCI Interrupt Link [LP02] (IRQs *7)
ACPI: PCI Interrupt Link [LP03] (IRQs *9)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP06] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP08] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP09] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0A] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0B] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0C] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0D] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0E] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0F] (IRQs) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
pnp: 00:01: ioport range 0x510-0x517 has been reserved
pnp: 00:01: ioport range 0x504-0x507 has been reserved
pnp: 00:01: ioport range 0x500-0x503 has been reserved
Time: hpet clocksource has been installed.
pnp: 00:01: ioport range 0x520-0x53f has been reserved
pnp: 00:01: ioport range 0x540-0x547 has been reserved
pnp: 00:01: ioport range 0x460-0x461 has been reserved
pnp: 00:09: iomem range 0xf4000000-0xfbffffff could not be reserved
pnp: 00:09: iomem range 0xfec00000-0xffffffff could not be reserved
PCI: Bridge: 0000:01:0d.0
IO window: disabled.
MEM window: e2000000-e6ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e2000000-e7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: 4000-4fff
MEM window: df000000-e00fffff
PREFETCH window: d4000000-d40fffff
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: dd000000-ddffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:08.0
IO window: disabled.
MEM window: dc000000-dcffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: db000000-dbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: disabled.
MEM window: da000000-daffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: d9000000-d9ffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
fuse init (API version 7.8)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:05.0
PCI: Found enabled HT MSI Mapping on 0000:00:08.0
PCI: Found enabled HT MSI Mapping on 0000:00:09.0
PCI: Found enabled HT MSI Mapping on 0000:00:0a.0
PCI: Found enabled HT MSI Mapping on 0000:00:0b.0
PCI: MSI quirk detected. MSI deactivated.
PCI: Setting latency timer of device 0000:00:08.0 to 64
Allocate Port Service[0000:00:08.0:pcie01]
PCI: Setting latency timer of device 0000:00:09.0 to 64
Allocate Port Service[0000:00:09.0:pcie01]
PCI: Setting latency timer of device 0000:00:0a.0 to 64
Allocate Port Service[0000:00:0a.0:pcie01]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
Allocate Port Service[0000:00:0b.0:pcie01]
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:08.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:09.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:0a.0:pcie01 failed with error 2
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
aer_init: AER service init fails - Run ACPI _OSC fails
aer: probe of 0000:00:0b.0:pcie01 failed with error 2
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: Processor [CPU3] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
00:02: ttyS0 at I/O 0x2e8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
nbd: registered device at major 43
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.11 (June 4, 2007)
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 17 (level, low) -> IRQ 17
eth0: Broadcom NetXtreme II BCM5706 1000Base-SX (A2) PCI-X 64-bit 133MHz found at mem e2000000, IRQ 17, node addr 00145e6d92d0
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 18 (level, low) -> IRQ 18
eth1: Broadcom NetXtreme II BCM5706 1000Base-SX (A2) PCI-X 64-bit 133MHz found at mem e4000000, IRQ 18, node addr 00145eb38f70
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk-zC7DfRvBq/JWk0Htik3J/w@public.gmane.org>
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level, low) -> IRQ 19
mptbase: Initiating ioc0 bringup
ioc0: SAS1064: Capabilities={Initiator}
scsi0 : ioc0: LSISAS1064, FwRev=000a0f00h, Ports=1, MaxQ=511, IRQ=19
scsi 0:0:0:0: Direct-Access IBM-ESXS MAY2073RC T107 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors (73407 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: d7 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 143374000 512-byte hardware sectors (73407 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: d7 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 4
ACPI: PCI Interrupt 0000:00:03.2[A] -> Link [LPUS] -> GSI 4 (level, low) -> IRQ 4
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 4, io mem 0xf3ffd000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LPUS] -> GSI 4 (level, low) -> IRQ 4
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 4, io mem 0xf3fff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LPUS] -> GSI 4 (level, low) -> IRQ 4
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 4, io mem 0xf3ffe000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 2 ports detected
usb 2-2: new full speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 2-2.1: new full speed USB device using ohci_hcd and address 3
usb 2-2.1: configuration #1 chosen from 1 choice
usb 2-2.3: new full speed USB device using ohci_hcd and address 4
usb 2-2.3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
input: IBM PPC I/F as /class/input/input1
input: USB HID v1.10 Keyboard [IBM PPC I/F] on usb-0000:00:03.0-2.1
input: IBM PPC I/F as /class/input/input2
input: USB HID v1.10 Mouse [IBM PPC I/F] on usb-0000:00:03.0-2.1
input: IBM HIDK/M as /class/input/input3
input: USB HID v1.10 Keyboard [IBM HIDK/M] on usb-0000:00:03.0-2.3
input: IBM HIDK/M as /class/input/input4
input: USB HID v1.10 Mouse [IBM HIDK/M] on usb-0000:00:03.0-2.3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
powernow-k8: Found 4 Dual-Core AMD Opteron(tm) Processor 2220 processors (version 2.00.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 312k freed
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
Buffer I/O error on device nbd0, logical block 0
Buffer I/O error on device nbd0, logical block 1
Buffer I/O error on device nbd0, logical block 2
Buffer I/O error on device nbd0, logical block 3
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
Buffer I/O error on device nbd0, logical block 0
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 4294965120
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 4294965120
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 0
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 4294965120
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 0
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 4294965120
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 0
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 4294965120
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 0
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 4294965120
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 0
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 4294965120
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 0
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 4294965120
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 0
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 4294965120
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 0
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 4294965120
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 0
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 4294965120
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 0
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 4294965120
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 0
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 4294965120
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 0
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 4294965120
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 0
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 4294965120
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 0
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 4294965120
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 0
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 0
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 0
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 0
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 0
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 0
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 0
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 0
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 0
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 0
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 0
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 0
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 0
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 0
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 0
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 0
Adding 7815612k swap on /dev/disk/by-uuid/b70fa511-1f78-4697-98d5-380d5eb6561c. Priority:-1 extents:1 across:7815612k
EXT3 FS on sda1, internal journal
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
Buffer I/O error on device nbd0, logical block 0
Buffer I/O error on device nbd0, logical block 1
Buffer I/O error on device nbd0, logical block 2
Buffer I/O error on device nbd0, logical block 3
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
Buffer I/O error on device nbd0, logical block 0
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 4294965120
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 4294965120
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 0
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 4294965120
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 0
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 4294965120
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 0
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 4294965120
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 0
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 4294965120
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 0
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 4294965120
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 0
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 4294965120
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 0
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 4294965120
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 0
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 4294965120
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 0
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 4294965120
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 0
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 4294965120
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 0
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 4294965120
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 0
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 4294965120
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 0
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 4294965120
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 0
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 4294965120
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 0
nbd0: Attempted send on closed socket
end_request: I/O error, dev nbd0, sector 0
nbd1: Attempted send on closed socket
end_request: I/O error, dev nbd1, sector 0
nbd2: Attempted send on closed socket
end_request: I/O error, dev nbd2, sector 0
nbd3: Attempted send on closed socket
end_request: I/O error, dev nbd3, sector 0
nbd4: Attempted send on closed socket
end_request: I/O error, dev nbd4, sector 0
nbd5: Attempted send on closed socket
end_request: I/O error, dev nbd5, sector 0
nbd6: Attempted send on closed socket
end_request: I/O error, dev nbd6, sector 0
nbd7: Attempted send on closed socket
end_request: I/O error, dev nbd7, sector 0
nbd8: Attempted send on closed socket
end_request: I/O error, dev nbd8, sector 0
nbd9: Attempted send on closed socket
end_request: I/O error, dev nbd9, sector 0
nbd10: Attempted send on closed socket
end_request: I/O error, dev nbd10, sector 0
nbd11: Attempted send on closed socket
end_request: I/O error, dev nbd11, sector 0
nbd12: Attempted send on closed socket
end_request: I/O error, dev nbd12, sector 0
nbd13: Attempted send on closed socket
end_request: I/O error, dev nbd13, sector 0
nbd14: Attempted send on closed socket
end_request: I/O error, dev nbd14, sector 0
nbd15: Attempted send on closed socket
end_request: I/O error, dev nbd15, sector 0
device eth1 entered promiscuous mode
ADDRCONF(NETDEV_UP): eth1: link is not ready
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
vlan0: port 1(eth1) entering learning state
vlan0: topology change detected, propagating
vlan0: port 1(eth1) entering forwarding state
vlan0: no IPv6 routers present
eth1: no IPv6 routers present
kvm: emulating exchange as write
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 5297 role 112
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d52 role 112
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 659b role 12
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 151f9 role 112
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 8844 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d4e role 12
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 529e role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 529f role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 528c role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 52a3 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 65a4 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 528e role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d5b role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d46 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 7e83 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn b2ce role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 52a2 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 9301 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 15bd role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 8a62 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 8a5f role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 5297 role 12
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 528b role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 52a4 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d57 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 52a0 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 4f03 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 4f03 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 4f02 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 4f02 role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 8a3d role 13
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d4e role 12
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 5297 role 12
audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn bf80 role 22
general protection fault: 0000 [1] SMP
CPU 3
Modules linked in: kvm_amd kvm
Pid: 3269, comm: qemu-system-x86 Not tainted 2.6.22 #5
RIP: 0010:[<ffffffff88006f44>] [<ffffffff88006f44>] :kvm:audit_mappings_page+0x4f/0x115
RSP: 0018:ffff8101265df8c8 EFLAGS: 00010216
RAX: ffff810000000000 RBX: 0000000000000000 RCX: 0000000000000015
RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffff810105842000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000004
R10: 0000000000000046 R11: ffffffff8021ae52 R12: ffff810105842000
R13: ffff810105842000 R14: 000f80fffffff000 R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffff81012bd01780(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000000047d670 CR3: 00000001265cd000 CR4: 00000000000006e0
Process qemu-system-x86 (pid: 3269, threadinfo ffff8101265de000, task ffff81012ae1a6b0)
Stack: 0000000000000000 0000000000000a5e ffff8100c9438e10 0000000000200000
0000000000000000 0000000000000000 0000000000000000 ffff8100c9b32f00
ffff810105842000 ffff8100c949b078 ffff81012fb49fa0 ffffffff880082c1
Call Trace:
[<ffffffff880082c1>] :kvm:kvm_mmu_get_page+0x489/0x518
[<ffffffff88008815>] :kvm:kvm_mmu_load+0xe6/0x178
[<ffffffff880040b4>] :kvm:kvm_vcpu_ioctl_run+0x16e/0x3a3
[<ffffffff880043f6>] :kvm:kvm_vcpu_ioctl+0x10d/0xd7f
[<ffffffff803898d3>] tty_ldisc_deref+0x62/0x75
[<ffffffff8038aa87>] tty_poll+0x5f/0x6d
[<ffffffff80288260>] do_select+0x449/0x466
[<ffffffff80288769>] __pollwait+0x0/0xe1
[<ffffffff804f8bac>] tcp_transmit_skb+0x6a1/0x6de
[<ffffffff8023934d>] __mod_timer+0xb6/0xc4
[<ffffffff804fa8b1>] __tcp_push_pending_frames+0x7c0/0x889
[<ffffffff804cc8b2>] __alloc_skb+0x84/0x13c
[<ffffffff80553f0f>] _spin_lock_bh+0x9/0x19
[<ffffffff804c8c05>] release_sock+0x13/0x9b
[<ffffffff804f039a>] tcp_sendmsg+0x96d/0xa71
[<ffffffff804c6fce>] sock_sendmsg+0xcb/0xe3
[<ffffffff802426ba>] autoremove_wake_function+0x0/0x2e
[<ffffffff802884b1>] core_sys_select+0x234/0x265
[<ffffffff8034bec4>] rb_insert_color+0xb2/0xda
[<ffffffff8024468e>] enqueue_hrtimer+0x64/0x6b
[<ffffffff80244bf4>] hrtimer_start+0xf2/0x104
[<ffffffff80239ead>] __dequeue_signal+0x19/0x15a
[<ffffffff80239953>] recalc_sigpending+0xe/0x25
[<ffffffff8023b477>] dequeue_signal+0xa5/0x126
[<ffffffff8028722f>] do_ioctl+0x2b/0xb6
[<ffffffff802874fd>] vfs_ioctl+0x243/0x25c
[<ffffffff80245c27>] getnstimeofday+0x32/0x8b
[<ffffffff80287552>] sys_ioctl+0x3c/0x5e
[<ffffffff802092de>] system_call+0x7e/0x83
Code: 49 8b 2e 48 89 e8 83 e0 01 48 89 44 24 10 0f 84 85 00 00 00
RIP [<ffffffff88006f44>] :kvm:audit_mappings_page+0x4f/0x115
RSP <ffff8101265df8c8>
[-- Attachment #3: Type: text/plain, Size: 228 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
[-- Attachment #4: Type: text/plain, Size: 186 bytes --]
_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: BUG_ON in mmu.c:436
[not found] ` <20070928181915.GH7519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
@ 2007-09-30 7:32 ` Avi Kivity
0 siblings, 0 replies; 8+ messages in thread
From: Avi Kivity @ 2007-09-30 7:32 UTC (permalink / raw)
To: Ryan Harper; +Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Ryan Harper wrote:
> * Anthony Liguori <anthony-rdkfGonbjUSkNkDKm+mE6A@public.gmane.org> [2007-09-24 16:39]:
>
>> Ryan Harper wrote:
>>
>>> * Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org> [2007-09-24 02:57]:
>>>
>>>
>>>> Ryan Harper wrote:
>>>>
>>>>
>>>>> I've run into a nasty bug while trying to install a Linux guest using
>>>>> VMware Server inside a kvm guest (full dmesg attached and recreate
>>>>> instructions below bug).
>>>>>
>>>>>
>>>>>
>>>>>
>>>> Can you reproduce this with AUDIT turned on (top of mmu.c)? AUDIT is
>>>> very slow, so it's recommended to reduce guest memory as much as possible.
>>>>
>>>>
>>> Working on it -- running for the better part of today with 256MB and I'm
>>> still booting up the guest. I'll let you know how things go tomorrow.
>>> Any thoughts on how to speed audit runs up other than lower guest
>>> memory?
>>>
>>>
>> savevm right before you're about to launch your test w/o audit enabled.
>> then launch with loadvm and audit enabled and hit <enter> to launch your
>> test.
>>
>
> That was highly effective in getting as close to the fault as possible.
>
We may want to add a module parameter so that audit can be enabled and
disabled at runtime when compiled in.
> I ended up removing all callers to kvm_mmu_audit() and added one to
> mmu.c:rmap_write_protect() write before the BUG_ON() fires. Here is the
> kvm_mmu_audit() output the crash generates:
>
>
> audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 5297 role 112
> audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 6d52 role 112
> audit_write_protection: (rmap_write_protect()) shadow page has writable mappings: gfn 659b role 12
>
We need to bracket the error so that we know exactly where the problem
starts to appear, and then enable debug (conditionally on rip and/or
cr2) so that we have a full trace of what happens.
--
error compiling committee.c: too many arguments to function
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-09-30 7:32 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-23 21:55 BUG_ON in mmu.c:436 Ryan Harper
[not found] ` <20070923215548.GP7519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2007-09-24 2:39 ` Scott Serr
2007-09-24 7:54 ` Avi Kivity
[not found] ` <46F76D46.7040502-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-09-24 21:26 ` Ryan Harper
[not found] ` <20070924212649.GS7519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2007-09-24 21:37 ` Anthony Liguori
[not found] ` <46F82E36.7000402-rdkfGonbjUSkNkDKm+mE6A@public.gmane.org>
2007-09-28 18:19 ` Ryan Harper
[not found] ` <20070928181915.GH7519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2007-09-30 7:32 ` Avi Kivity
2007-09-25 8:00 ` Avi Kivity
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox