From: Farkas Levente <lfarkas-lWVWdrzSO4GHXe+LvDLADg@public.gmane.org>
To: Laurent Vivier <Laurent.Vivier-6ktuUTfB/bM@public.gmane.org>
Cc: kvm-devel
<kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>,
Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
Subject: Re: [ANNOUNCE] kvm-48 release
Date: Fri, 19 Oct 2007 15:35:44 +0200 [thread overview]
Message-ID: <4718B2B0.9050909@bppiac.hu> (raw)
In-Reply-To: <47189897.508-lWVWdrzSO4GHXe+LvDLADg@public.gmane.org>
Farkas Levente wrote:
> Laurent Vivier wrote:
>> Farkas Levente a écrit :
>>> Farkas Levente wrote:
>>>> Avi Kivity wrote:
>>>>> kvm-47 had a host memory corruption bug when setting the guest pte
>>>>> dirty bit, so here's kvm-48 with a fix.
>>>>>
>>>>> Note that guest time accounting, below, will only work with Linux
>>>>> 2.6.24+.
>>>> smp guests still not working with kvm-48:-( i can't image what others
>>>> can do to make it work. guests hang at random stage during boot. i
>>>> attached guests boot screenshot. setup:
>>>> ------------------------------------------------
>>>> - host:
>>>> - Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
>>>> - Intel S3000AHV
>>>> - 8GB RAM
>>>> - CentOS-5
>>>> - kernel-2.6.18-8.1.14.el5 x86_64 64bit
>>>> - guest-1:
>>>> - CentOS-5
>>>> - kernel-2.6.18-8.1.14.el5 i386 32bit
>>>> - guest-2:
>>>> - CentOS-5
>>>> - kernel-2.6.18-8.1.14.el5 x86_64 64bit
>>>> - guest-3:
>>>> - Mandrake-9
>>>> - kernel-2.4.19.16mdk-1-1mdk 32bit
>>>> - guest-4:
>>>> - Windows XP Professional 32bit
>>>> ------------------------------------------------
>>>> i try guest-1 and huest-2 with 4 vcpu others with 1 vcpu.
>>>> on host the only thing i've got in dmesg:
>>>> ------------------------------------------------
>>>> Call Trace:
>>>> <IRQ> [<ffffffff800b2c30>] softlockup_tick+0xdb/0xed
>>>> [<ffffffff800933ec>] update_process_times+0x42/0x68
>>>> [<ffffffff80073d61>] smp_local_timer_interrupt+0x23/0x47
>>>> [<ffffffff80074423>] smp_apic_timer_interrupt+0x41/0x47
>>>> [<ffffffff8005bcc2>] apic_timer_interrupt+0x66/0x6c
>>>> <EOI> [<ffffffff88205999>] :kvm:kvm_flush_remote_tlbs+0xfb/0x109
>>>> [<ffffffff88205988>] :kvm:kvm_flush_remote_tlbs+0xea/0x109
>>>> [<ffffffff88206314>] :kvm:gfn_to_page+0xa3/0xd5
>>>> [<ffffffff88205573>] :kvm:mark_page_dirty+0x9/0x2a
>>>> [<ffffffff8820b62c>] :kvm:kvm_mmu_pte_write+0x1fc/0x330
>>>> [<ffffffff882065d9>] :kvm:emulator_write_emulated_onepage+0x6e/0xce
>>>> [<ffffffff8820fcd0>] :kvm:x86_emulate_insn+0x2b98/0x4134
>>>> [<ffffffff80008e1a>] __handle_mm_fault+0x832/0xdf2
>>>> [<ffffffff8840a404>] :kvm_intel:vmcs_readl+0x17/0x1c
>>>> [<ffffffff88206ac2>] :kvm:emulate_instruction+0x152/0x290
>>>> [<ffffffff8840cb98>] :kvm_intel:handle_exception+0x170/0x250
>>>> [<ffffffff882074f6>] :kvm:kvm_vcpu_ioctl+0x343/0xf43
>>>> [<ffffffff80044d32>] try_to_wake_up+0x407/0x418
>>>> [<ffffffff800850b5>] __wake_up_common+0x3e/0x68
>>>> [<ffffffff8002dd9c>] __wake_up+0x38/0x4f
>>>> [<ffffffff80021b8a>] __up_read+0x19/0x7f
>>>> [<ffffffff8011735a>] avc_has_perm+0x43/0x55
>>>> [<ffffffff80117e91>] inode_has_perm+0x56/0x63
>>>> [<ffffffff80058bf1>] getnstimeofday+0x10/0x28
>>>> [<ffffffff80086c37>] default_wake_function+0x0/0xe
>>>> [<ffffffff80117f32>] file_has_perm+0x94/0xa3
>>>> [<ffffffff8003fc5b>] do_ioctl+0x21/0x6b
>>>> [<ffffffff8002fa61>] vfs_ioctl+0x248/0x261
>>>> [<ffffffff8004a267>] sys_ioctl+0x59/0x78
>>>> [<ffffffff8005b2c1>] tracesys+0xd1/0xdc
>>>> ------------------------------------------------
>>> the situation is even worse, the guests are hang during boot even with
>>> single vcpu and even with kvm-46:-( i attached another screenshot. but
>>> after i kill the guest and start it again it works. it seems the problem
>>> occurs when i start more guest at the same time (eg. after reboot the
>>> host). and it seems there is some kind of acpi error since all of the
>>> guest hang screenshot contains some kind of acpi error.
>> What happens if you use "-noacpi" ?
>
> in this case single cpu guests are working with kvm-48, but 4
> vcpu/guests still hang:-(
one more thing which happened with single cpu guests on kvm-48 in dmesg
on the host:
Fault when IDT_Vectoring
Fault when IDT_Vectoring
Fault when IDT_Vectoring
Fault when IDT_Vectoring
Fault when IDT_Vectoring
Fault when IDT_Vectoring
Fault when IDT_Vectoring
Fault when IDT_Vectoring
Fault when IDT_Vectoring
Fault when IDT_Vectoring
Fault when IDT_Vectoring
Fault when IDT_Vectoring
--
Levente "Si vis pacem para bellum!"
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
prev parent reply other threads:[~2007-10-19 13:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-18 16:58 [ANNOUNCE] kvm-48 release Avi Kivity
[not found] ` <471790A3.5080704-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-10-19 7:49 ` Farkas Levente
[not found] ` <47186186.5070409-lWVWdrzSO4GHXe+LvDLADg@public.gmane.org>
2007-10-19 9:00 ` Farkas Levente
[not found] ` <47187245.3020201-lWVWdrzSO4GHXe+LvDLADg@public.gmane.org>
2007-10-19 9:11 ` Laurent Vivier
[not found] ` <471874AD.4080201-6ktuUTfB/bM@public.gmane.org>
2007-10-19 11:44 ` Farkas Levente
[not found] ` <47189897.508-lWVWdrzSO4GHXe+LvDLADg@public.gmane.org>
2007-10-19 13:35 ` Farkas Levente [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4718B2B0.9050909@bppiac.hu \
--to=lfarkas-lwvwdrzso4ghxe+lvdladg@public.gmane.org \
--cc=Laurent.Vivier-6ktuUTfB/bM@public.gmane.org \
--cc=avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org \
--cc=kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox