From: Izik Eidus <izike-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
To: Mike <mike-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: VM networking stops working
Date: Wed, 21 Nov 2007 23:40:26 +0200 [thread overview]
Message-ID: <4744A5CA.8050604@qumranet.com> (raw)
In-Reply-To: <4744A5E5.9060902-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
Mike wrote:
> Izik Eidus schrieb:
>
>> Mike wrote:
>>
>>> Hello,
>>> I have a problem with my virtual machines. I am using kvm53
>>> on an AMD Athlon(tm) 64 X2 Dual Core Processor 5000+.
>>> As distribution I use Ubuntu server 7.10.
>>> As kernel I use Linux 2.6.22-14-server #1 SMP Sun Oct 14 22:09:15 GMT
>>> 2007 x86_64 GNU/Linux.
>>>
>>> I have 3 different vms running. At the beginning they all work
>>> without a problem.
>>> Then, after one moment to another one or more stop working.
>>> I did a ping test to all the machines, the vm with the failure stops
>>> pinging.
>>> The result from external ping: Destination host unreachable.
>>> The same result from a ping onto the main server.
>>>
>>> Here are my configuration files:
>>> cat /etc/qemu-ifup
>>> #!/bin/sh
>>> /sbin/ifconfig $1 0.0.0.0 promisc up
>>> /usr/sbin/brctl addif br0 $1
>>> sleep 2
>>> ------------------------------------------------------------------------
>>> cat /etc/network/interfaces
>>> auto lo
>>> iface lo inet loopback
>>>
>>> auto br0
>>> iface br0 inet static
>>> address 195.24.77.169
>>> netmask 255.255.255.0
>>> gateway 195.24.77.1
>>> bridge_ports eth0
>>> bridge_stp off
>>> bridge_maxwait 5
>>> ------------------------------------------------------------------------
>>> I use scripts for starting the vms:
>>> kvm -hda apache.img -hdb apache_storage.img -m 512 -boot c -net
>>> nic,vlan=0,macaddr=00:16:3e:00:00:01 -net tap -nographic -daemonize
>>> kvm -hda postfix.img -m 512 -boot c -net
>>> nic,vlan=0,macaddr=00:16:3e:00:00:12 -net tap -nographic -daemonize
>>> kvm -hda openvpn.img -m 256 -boot c -net
>>> nic,vlan=0,macaddr=00:16:3e:00:00:03 -net tap -nographic -daemonize
>>> ------------------------------------------------------------------------
>>> The tapN devices are being created at the startup of the vms.
>>>
>>> When I run dmesg I have this:
>>> [ 112.390943] br0: port 2(tap1) entering learning state
>>> [ 112.391919] br0: port 3(tap0) entering learning state
>>> [ 112.397605] br0: port 4(tap2) entering learning state
>>> [ 122.674313] tap0: no IPv6 routers present
>>> [ 122.729185] tap1: no IPv6 routers present
>>> [ 122.843901] tap2: no IPv6 routers present
>>> [ 123.336081] kvm: emulating exchange as write
>>> [ 127.367940] br0: topology change detected, propagating
>>> [ 127.367949] br0: port 4(tap2) entering forwarding state
>>> [ 127.362971] br0: topology change detected, propagating
>>> [ 127.362977] br0: port 2(tap1) entering forwarding state
>>> [ 127.362978] br0: topology change detected, propagating
>>> [ 127.362980] br0: port 3(tap0) entering forwarding state
>>>
>>> No indication of a problem, nowhere in the log files.
>>>
>>> I don't know if the vms are freezing, or the network forwarding stops
>>> working.
>>> I also activated "net.ipv4.conf.default.forwarding=1"
>>>
>>> I googled days for that problem, but without a result.
>>> I hope that maybe you have a solution for this problem. That would be
>>> great, because I prefer using kvm instead of other virtualization
>>> systems.
>>>
>>> Thank you very much in advance,
>>> Greetings from Luxembourg.
>>>
>>> Have a nice day,
>>> Mike
>>>
>> it might be not the network that die, but the whole vm
>> can you run the vms with -vnc ? (first vm -vnc :1 secoend vm -vnc :2
>> third vm -vnc :3)
>> and try to connect to them with vncviewer and see if they are alive?
>>
>>
> Thank you for your reply.
> I can't connect to the vm if it has died, even with vnc. I tried this
> already, no reply from the host.
> I don't have physical access to the server because its located in a dc.
> Only ssh to the host.
>
ok this mean there is bug in kvm for amd and it not realted to the network
what is the guest that you use? is it 64/32?
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
next prev parent reply other threads:[~2007-11-21 21:40 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-21 20:52 VM networking stops working Mike
[not found] ` <47449A93.5090007-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
2007-11-21 21:22 ` Izik Eidus
[not found] ` <4744A18D.2050705-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-11-21 21:40 ` Mike
[not found] ` <4744A5E5.9060902-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
2007-11-21 21:40 ` Izik Eidus [this message]
[not found] ` <4744A5CA.8050604-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-11-21 21:53 ` Mike
[not found] ` <4744A8CA.5070702-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
2007-11-21 21:52 ` Izik Eidus
[not found] ` <4744A881.1060201-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-11-21 22:06 ` Mike
[not found] ` <4744ABD8.8020409-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
2007-11-21 22:05 ` Izik Eidus
[not found] ` <4744ABBC.30708-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-11-21 22:15 ` Mike
2007-11-21 22:32 ` Mike
2007-11-21 22:09 ` Lynn Kerby
[not found] ` <E729CB4A-EA27-46BD-A54D-47D87117DE90-br2HoPxSX4msTnJN9+BGXg@public.gmane.org>
2007-11-22 10:51 ` Mike
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4744A5CA.8050604@qumranet.com \
--to=izike-atkuwr5tajbwk0htik3j/w@public.gmane.org \
--cc=kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=mike-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox