From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jerry Geis Subject: Re: kvm-55 and ne2k-pci Date: Mon, 10 Dec 2007 09:09:48 -0500 Message-ID: <475D48AC.3080603@pagestation.com> References: <475D42CC.5040701@pagestation.com> <1197294334.3164.0.camel@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org To: Izik Eidus Return-path: In-Reply-To: <1197294334.3164.0.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: kvm-devel-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: kvm-devel-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: kvm.vger.kernel.org Izik Eidus wrote: > On Mon, 2007-12-10 at 08:44 -0500, Jerry Geis wrote: > >> I installed redhat7.3 and redhat 9 an a qemu-img with 12G each. >> >> When I am running the ne2k-pci the network stalls. >> I tried both redhat 7.3 and redhat 9. both stall. >> >> I then tried to change to use "-net nic,model=rtl8139" >> and I could not get the network to even start up on redhat 9. >> > try -net nic,model=rtl8139 -net user > >> I re-ran kudzu to detect the new network card - it did, I rebooted >> I got errors trying to bring up eth0. >> >> I am running centos 5.1, AMD 6400+ X2, kvm-55, kernel 2.6.23.9 >> >> What might my issue be? >> >> Jerry >> >> >> ------------------------------------------------------------------------- >> SF.Net email is sponsored by: >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services for >> just about anything Open Source. >> http://sourceforge.net/services/buy/index.php >> _______________________________________________ >> kvm-devel mailing list >> kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org >> https://lists.sourceforge.net/lists/listinfo/kvm-devel >> > > > The extra -net user did the trick for redhat 9. THanks, I'll try redhat 7 now. The network "seemed" slow. ethtool eth0 reports 100m full. when copying all my files over it was slow. THese were source files (text) not big files at all. Jerry ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php