From: Antoine Martin <antoine-pzR7fkEi+fEqdlJmJB21zg@public.gmane.org>
To: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: boot stops after console handover?
Date: Sun, 06 Jan 2008 19:28:03 +0000 [thread overview]
Message-ID: <47812BC3.6060503@nagafix.co.uk> (raw)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Hi,
Trying to boot KVM on a Core2Duo system, kvm-59 + linux-2.6.23.12
Booting with:
qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append
"earlyprintk=serial,ttyS0,115200"
Boot stops after:
[ 0.509283] time.c: Detected 2393.985 MHz processor.
[ 0.600090] Console: colour VGA+ 80x25
[ 0.600570] console handover: boot [earlyser0] -> real [tty0]
It sits there using 100% CPU until I kill it.
If I add "-serial file:serial.log", I get dropped to the qemu shell and
the log file contains the same as above.
Sorry if this has been covered before, couldn't find it.
Cheers
Antoine
Strace of the spinning process:
clock_gettime(CLOCK_MONOTONIC, {6003, 864979716}) = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10) = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10) = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10) = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 865075815}) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 865092971}) = 0
timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0
timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 250000}}, NULL) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 865156093}) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 865173715}) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 865192525}) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 865210519}) = 0
timer_gettime(0, {it_interval={0, 0}, it_value={0, 162334}}) = 0
ioctl(5, 0xae80, 0) = -1 EINTR (Interrupted system call)
rt_sigtimedwait([USR2 ALRM IO], {si_signo=SIGALRM, si_code=SI_TIMER,
si_pid=0, si_uid=0, si_value={int=0, ptr=0x7fff00000000}},
0x7fff64781140, 8) = 14
rt_sigaction(SIGALRM, NULL, {0x60006e20, ~[KILL STOP RTMIN RT_1],
SA_RESTORER, 0x2b6546c23ed0}, 8) = 0
rt_sigtimedwait([USR2 ALRM IO], 0x6026ee00) = -1 EAGAIN (Resource
temporarily unavailable)
select(1, [0], [], [], {0, 0}) = 0 (Timeout)
clock_gettime(CLOCK_MONOTONIC, {6003, 874979291}) = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10) = 0
ioctl(4, 0x4008ae61, 0x7fff64780f10) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 875036807}) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 875054053}) = 0
timer_gettime(0, {it_interval={0, 0}, it_value={0, 0}}) = 0
timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 8781000}}, NULL) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 875116694}) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 875134858}) = 0
clock_gettime(CLOCK_MONOTONIC, {6003, 875152025}) = 0
timer_gettime(0, {it_interval={0, 0}, it_value={0, 8712787}}) = 0
timer_settime(0, 0, {it_interval={0, 0}, it_value={0, 8683000}}, NULL) = 0
ioctl(5, 0xae80 <unfinished ...>
(ad-infinitum)
Full boot log below:
# qemu-system-x86_64 -hda /home/uml/BusyBox-1.5.0-amd64-root_fs -m 384
- -nographic -cpu qemu64 -kernel /boot/vmlinuz-2.6.23.12 -append
"earlyprintk=serial,115200"
[ 0.000000] Linux version 2.6.23.12 (root@gentoo) (gcc version 4.1.1
(Gentoo 4.1.1-r3)) #2 SMP Fri Jan 4 21:25:37 GMT 2008
[ 0.000000] Command line: earlyprintk=serial,115200
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
[ 0.000000] BIOS-e820: 0000000017ff0000 - 0000000018000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffbd000 - 0000000100000000 (reserved)
[ 0.000000] console [earlyser0] enabled
[ 0.000000] end_pfn_map = 1048576
kernel direct mapping tables up to 100000000 @ 8000-d000
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: RSDP 000FAD00, 0014 (r0 QEMU )
[ 0.000000] ACPI: RSDT 17FF0000, 002C (r1 QEMU QEMURSDT 1
QEMU 1)
[ 0.000000] ACPI: FACP 17FF002C, 0074 (r1 QEMU QEMUFACP 1
QEMU 1)
[ 0.000000] ACPI: DSDT 17FF0100, 0948 (r1 BXPC BXDSDT 1
INTL 20061109)
[ 0.000000] ACPI: FACS 17FF00C0, 0040
[ 0.000000] ACPI: APIC 17FF0A48, 0040 (r1 QEMU QEMUAPIC 1
QEMU 1)
[ 0.000000] No mptable found.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 98288
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000
- - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- - 00000000000e8000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e8000
- - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
18000000:e7fbd000)
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 31336 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order. Total pages: 94849
[ 0.000000] Kernel command line: earlyprintk=serial,115200
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 0.496644] time.c: Detected 2393.776 MHz processor.
[ 0.587700] Console: colour VGA+ 80x25
[ 0.588182] console handover: boot [earlyser0] -> real [tty0]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.8 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEAREKAAYFAkeBK8MACgkQGK2zHPGK1rvVxQCeIIqxyiOF4cjE1LGmUNdz97nn
t2cAnjnSUlqjHxBwXRTkXYRKahQy8IAg
=qF2a
-----END PGP SIGNATURE-----
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
next reply other threads:[~2008-01-06 19:28 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-06 19:28 Antoine Martin [this message]
[not found] ` <47812BC3.6060503-pzR7fkEi+fEqdlJmJB21zg@public.gmane.org>
2008-01-06 19:29 ` boot stops after console handover? Izik Eidus
[not found] ` <47812C21.2060408-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2008-01-06 19:39 ` Antoine Martin
[not found] ` <47812E75.9050301-pzR7fkEi+fEqdlJmJB21zg@public.gmane.org>
2008-01-06 22:32 ` Antoine Martin
2008-01-07 9:16 ` Avi Kivity
[not found] ` <4781EDE3.2000008-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2008-01-07 19:30 ` Antoine Martin
[not found] ` <47827DE4.2020306-pzR7fkEi+fEqdlJmJB21zg@public.gmane.org>
2008-01-07 22:36 ` Carlo Marcelo Arenas Belon
2008-01-08 0:12 ` Antoine Martin
2008-01-08 8:33 ` Avi Kivity
[not found] ` <47833572.7090902-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2008-01-08 18:54 ` Antoine Martin
[not found] ` <4783C6CC.1050404-pzR7fkEi+fEqdlJmJB21zg@public.gmane.org>
2008-01-12 18:07 ` Antoine Martin
[not found] ` <478901D7.1060404-pzR7fkEi+fEqdlJmJB21zg@public.gmane.org>
2008-01-12 21:01 ` Avi Kivity
[not found] ` <47892AA8.6090406-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2008-01-12 22:25 ` Carlo Marcelo Arenas Belon
2008-01-13 1:19 ` Antoine Martin
[not found] ` <47896711.4050909-pzR7fkEi+fEqdlJmJB21zg@public.gmane.org>
2008-01-13 3:10 ` Carlo Marcelo Arenas Belon
2008-01-13 3:33 ` Carlo Marcelo Arenas Belon
2008-01-13 11:32 ` Antoine Martin
2008-02-26 21:53 ` Antoine Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47812BC3.6060503@nagafix.co.uk \
--to=antoine-pzr7fkei+feqdljmjb21zg@public.gmane.org \
--cc=kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox