From mboxrd@z Thu Jan 1 00:00:00 1970 From: Felix Leimbach Subject: Re: Chaning disks from IDE to SCSI on a Windows VM Date: Wed, 16 Apr 2008 08:09:33 +0200 Message-ID: <4805981D.6020708@gmx.net> References: <200804141207.07061.alberto@byu.edu> <48044E04.5050305@gmx.net> <200804151029.34254.alberto@byu.edu> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: =?ISO-8859-1?Q?Alberto_Trevi=F1o?= , kvm-devel@lists.sourceforge.net To: Jun Koi Return-path: In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: kvm-devel-bounces@lists.sourceforge.net Errors-To: kvm-devel-bounces@lists.sourceforge.net List-Id: kvm.vger.kernel.org Jun, what happens when you boot into Windows' safe mode? It usually displays the drivers as it loads them. Would be interesting to see where it hangs. Also try this: * Boot with the IDE disk which works and the dummy SCSI disk attached as per Alberto's instructions * After you confirmed that the SCSI controller and disk are in device manager: delete the currently in use IDE controller from device manager * Reboot into the SCSI setup Good luck, Felix ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone