Re: Protected mode transitions and big real mode... still an issue

[Anthony Liguori <anthony@codemonkey.ws>]

Laurent Vivier wrote:
> Le mardi 29 avril 2008 à 11:41 -0500, Anthony Liguori a écrit :
>   
>> Guillaume Thouvenin wrote:
>>     
>>> Hello,
>>>
>>>  This patch should solve the problem observed during protected mode
>>> transitions that appears for example during the installation of
>>> openSuse-10.3. Unfortunately there is an issue that crashes
>>> kvm-userspace. I'm not sure if it's a problem introduced by the
>>> patch or if the patch is good and raises a new issue.
>>>   
>>>       
>> You still aren't emulating the instructions correctly I think.  Running 
>> your patch, I see:
>>
>> [  979.755349] Failed vm entry (exit reason 0x21) invalid guest state
>> [  979.755354] emulation at (46e4b) rip 6e0b: ea 10 6e 18
>> [  979.755358] successfully emulated instruction
>> [  979.756105] Failed vm entry (exit reason 0x21) invalid guest state
>> [  979.756109] emulation at (46e50) rip 6e10: 66 b8 20 00
>> [  979.756111] successfully emulated instruction
>> [  979.756749] Failed vm entry (exit reason 0x21) invalid guest state
>> [  979.756752] emulation at (46e54) rip 6e14: 8e d8 8c d0
>> [  979.756755] successfully emulated instruction
>> [  979.757427] Failed vm entry (exit reason 0x21) invalid guest state
>> [  979.757430] emulation at (46e56) rip 6e16: 8c d0 81 e4
>> [  979.757433] successfully emulated instruction
>> [  979.758074] Failed vm entry (exit reason 0x21) invalid guest state
>> [  979.758077] emulation at (46e58) rip 6e18: 81 e4 ff ff
>>
>>
>> The corresponding gfxboot code is:
>>
>>  16301 00006E0B EA[106E]1800                    jmp 
>> pm_seg.prog_c32:switch_to_pm_20
>>  16302                                  switch_to_pm_20:
>>  16303                                 
>>  16304                                          bits 32
>>  16305                                 
>>  16306 00006E10 66B82000                        mov ax,pm_seg.prog_d16
>>  16307 00006E14 8ED8                            mov ds,ax
>>  16308                                 
>>  16309 00006E16 8CD0                            mov eax,ss
>>  16310 00006E18 81E4FFFF0000                    and esp,0ffffh
>>  
>>
>> The VT state should be correct after executing instruction an RIP 6E16 
>> (mov eax, ss).  The next instruction should not cause a vmentry 
>>     
>
> Are you sure ? It is intel notation (opcode dst,src) , so it updates
> eax, not ss. Guillaumes gives us (with gdb notation, opcode src,dst):
>   

You're right, it's a fair bit down the code before the ss move happens.

Regards,

Anthony Liguori

>   0x0000000000046e53:  ljmp   $0x18,$0x6e18
>
>   0x0000000000046e58:  mov    $0x20,%ax
>
> %EAX = 0x20
>
>   0x0000000000046e5c:  mov    %eax,%ds
>
> %DS = 0x20
>
>   0x0000000000046e5e:  mov    %ss,%eax
>
> %EAX = %SS = 0x53E1 (in this particular case)
>
> For me the issue is with instructions with "dst.byte = 0".
> for instance:
>
> 0x0000000000046e66:  shl    $0x4,%eax
>
> [82768.003174] emulation at (46e66) rip 6e26: c1 e0 04 01
> [82768.035153]     writeback: dst.byte 0
> [82768.055174]     writeback: dst.ptr  0x0000000000000000
> [82768.087177]     writeback: dst.val  0x53e1
> [82768.111178]     writeback: src.ptr  0x0000000000006e28
> [82768.143157]     writeback: src.val  0x4
>
> So my questions are:
>
> Why dst.val is not 0x53e10 ?
> Why dst.byte is 0 ?
>
>   
>> failure.  The fact that it is for you indicates that you're not updating 
>> guest state correctly.
>>
>> My guess would be that load_segment_descriptor is not updating the 
>> values within the VMCS.
>>
>> Regards,
>>
>> Anthony Liguori
>>     
>
> Regards
> Laurent
>   


-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
kvm-devel mailing list
kvm-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/kvm-devel