From: Avi Kivity <avi-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Hollis Blanchard <hollisb-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
Cc: Jan Kiszka <jan.kiszka-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org>,
kvm-devel <kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
kvm-ppc <kvm-ppc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH] KVM: PowerPC: Disarm old guest debug interface
Date: Sun, 04 Jan 2009 12:54:11 +0200 [thread overview]
Message-ID: <49609553.6060308@redhat.com> (raw)
In-Reply-To: <1231012661.3501.4.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
Hollis Blanchard wrote:
>
> kvm: ppc: remove debug support broken by KVM debug rewrite
>
> After the rewrite of KVM's debug support, this code doesn't even build any
> more.
>
> Signed-off-by: Hollis Blanchard <hollisb-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
>
> diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
> --- a/arch/powerpc/include/asm/kvm_host.h
> +++ b/arch/powerpc/include/asm/kvm_host.h
> @@ -118,11 +118,6 @@ struct kvm_arch {
> struct kvm_vcpu_arch {
> u32 host_stack;
> u32 host_pid;
> - u32 host_dbcr0;
> - u32 host_dbcr1;
> - u32 host_dbcr2;
> - u32 host_iac[4];
> - u32 host_msr;
>
> u64 fpr[32];
> ulong gpr[32];
> @@ -200,10 +195,4 @@ struct kvm_vcpu_arch {
> unsigned long pending_exceptions;
> };
>
> -struct kvm_guest_debug {
> - int enabled;
> - unsigned long bp[4];
> - int singlestep;
> -};
> -
> #endif /* __POWERPC_KVM_HOST_H__ */
> diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
> --- a/arch/powerpc/include/asm/kvm_ppc.h
> +++ b/arch/powerpc/include/asm/kvm_ppc.h
> @@ -71,9 +71,6 @@ extern int kvmppc_core_vcpu_translate(st
> extern void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu);
> extern void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu);
>
> -extern void kvmppc_core_load_guest_debugstate(struct kvm_vcpu *vcpu);
> -extern void kvmppc_core_load_host_debugstate(struct kvm_vcpu *vcpu);
> -
> extern void kvmppc_core_deliver_interrupts(struct kvm_vcpu *vcpu);
> extern int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu);
> extern void kvmppc_core_queue_program(struct kvm_vcpu *vcpu);
> diff --git a/arch/powerpc/kvm/44x.c b/arch/powerpc/kvm/44x.c
> --- a/arch/powerpc/kvm/44x.c
> +++ b/arch/powerpc/kvm/44x.c
> @@ -28,72 +28,6 @@
>
> #include "44x_tlb.h"
>
> -/* Note: clearing MSR[DE] just means that the debug interrupt will not be
> - * delivered *immediately*. Instead, it simply sets the appropriate DBSR bits.
> - * If those DBSR bits are still set when MSR[DE] is re-enabled, the interrupt
> - * will be delivered as an "imprecise debug event" (which is indicated by
> - * DBSR[IDE].
> - */
> -static void kvm44x_disable_debug_interrupts(void)
> -{
> - mtmsr(mfmsr() & ~MSR_DE);
> -}
> -
> -void kvmppc_core_load_host_debugstate(struct kvm_vcpu *vcpu)
> -{
> - kvm44x_disable_debug_interrupts();
> -
> - mtspr(SPRN_IAC1, vcpu->arch.host_iac[0]);
> - mtspr(SPRN_IAC2, vcpu->arch.host_iac[1]);
> - mtspr(SPRN_IAC3, vcpu->arch.host_iac[2]);
> - mtspr(SPRN_IAC4, vcpu->arch.host_iac[3]);
> - mtspr(SPRN_DBCR1, vcpu->arch.host_dbcr1);
> - mtspr(SPRN_DBCR2, vcpu->arch.host_dbcr2);
> - mtspr(SPRN_DBCR0, vcpu->arch.host_dbcr0);
> - mtmsr(vcpu->arch.host_msr);
> -}
> -
> -void kvmppc_core_load_guest_debugstate(struct kvm_vcpu *vcpu)
> -{
> - struct kvm_guest_debug *dbg = &vcpu->guest_debug;
> - u32 dbcr0 = 0;
> -
> - vcpu->arch.host_msr = mfmsr();
> - kvm44x_disable_debug_interrupts();
> -
> - /* Save host debug register state. */
> - vcpu->arch.host_iac[0] = mfspr(SPRN_IAC1);
> - vcpu->arch.host_iac[1] = mfspr(SPRN_IAC2);
> - vcpu->arch.host_iac[2] = mfspr(SPRN_IAC3);
> - vcpu->arch.host_iac[3] = mfspr(SPRN_IAC4);
> - vcpu->arch.host_dbcr0 = mfspr(SPRN_DBCR0);
> - vcpu->arch.host_dbcr1 = mfspr(SPRN_DBCR1);
> - vcpu->arch.host_dbcr2 = mfspr(SPRN_DBCR2);
> -
> - /* set registers up for guest */
> -
> - if (dbg->bp[0]) {
> - mtspr(SPRN_IAC1, dbg->bp[0]);
> - dbcr0 |= DBCR0_IAC1 | DBCR0_IDM;
> - }
> - if (dbg->bp[1]) {
> - mtspr(SPRN_IAC2, dbg->bp[1]);
> - dbcr0 |= DBCR0_IAC2 | DBCR0_IDM;
> - }
> - if (dbg->bp[2]) {
> - mtspr(SPRN_IAC3, dbg->bp[2]);
> - dbcr0 |= DBCR0_IAC3 | DBCR0_IDM;
> - }
> - if (dbg->bp[3]) {
> - mtspr(SPRN_IAC4, dbg->bp[3]);
> - dbcr0 |= DBCR0_IAC4 | DBCR0_IDM;
> - }
> -
> - mtspr(SPRN_DBCR0, dbcr0);
> - mtspr(SPRN_DBCR1, 0);
> - mtspr(SPRN_DBCR2, 0);
> -}
> -
> void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
> {
> kvmppc_44x_tlb_load(vcpu);
> diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
> --- a/arch/powerpc/kvm/powerpc.c
> +++ b/arch/powerpc/kvm/powerpc.c
> @@ -216,36 +216,18 @@ void kvm_arch_vcpu_uninit(struct kvm_vcp
>
> void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
> {
> - if (vcpu->guest_debug.enabled)
> - kvmppc_core_load_guest_debugstate(vcpu);
> -
> kvmppc_core_vcpu_load(vcpu, cpu);
> }
>
> void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
> {
> - if (vcpu->guest_debug.enabled)
> - kvmppc_core_load_host_debugstate(vcpu);
> -
> kvmppc_core_vcpu_put(vcpu);
> }
>
> int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
> - struct kvm_guest_debug *dbg)
> + struct kvm_guest_debug *dbg)
> {
> - int i;
> -
> - vcpu->guest_debug.enabled = dbg->enabled;
> - if (vcpu->guest_debug.enabled) {
> - for (i=0; i < ARRAY_SIZE(vcpu->guest_debug.bp); i++) {
> - if (dbg->breakpoints[i].enabled)
> - vcpu->guest_debug.bp[i] = dbg->breakpoints[i].address;
> - else
> - vcpu->guest_debug.bp[i] = 0;
> - }
> - }
> -
> - return 0;
> + return -EINVAL;
> }
>
> static void kvmppc_complete_dcr_load(struct kvm_vcpu *vcpu,
>
>
This doesn't apply. What was it diffed against?
--
error compiling committee.c: too many arguments to function
--
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-01-04 10:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-19 17:13 [PATCH] KVM: PowerPC: Disarm old guest debug interface Jan Kiszka
2008-12-24 11:48 ` Avi Kivity
2009-01-03 19:57 ` Hollis Blanchard
[not found] ` <1231012661.3501.4.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2009-01-04 10:54 ` Avi Kivity [this message]
2009-01-04 19:51 ` [PATCH] [v2] " Hollis Blanchard
[not found] ` <1231098669.7724.16.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2009-01-05 13:32 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49609553.6060308@redhat.com \
--to=avi-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=hollisb-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org \
--cc=jan.kiszka-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org \
--cc=kvm-ppc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox