kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Theurer <habanero@linux.vnet.ibm.com>
To: Tejun Heo <tj@kernel.org>
Cc: Avi Kivity <avi@redhat.com>,
	kvm@vger.kernel.org, Linux-kernel@vger.kernel.org
Subject: Re: kernel bug in kvm_intel
Date: Wed, 25 Nov 2009 19:35:25 -0600	[thread overview]
Message-ID: <4B0DDB5D.9030202@linux.vnet.ibm.com> (raw)
In-Reply-To: <4B03BDCC.4080502@kernel.org>

Tejun Heo wrote:
> Hello,
> 
> 11/01/2009 08:31 PM, Avi Kivity wrote:
>>>> Here is the code in question:
>>>>
>>>>     
>>>>>      3ae7:       75 05                   jne   
>>>>> 3aee<vmx_vcpu_run+0x26a>
>>>>>        3ae9:       0f 01 c2                vmlaunch
>>>>>        3aec:       eb 03                   jmp   
>>>>> 3af1<vmx_vcpu_run+0x26d>
>>>>>        3aee:       0f 01 c3                vmresume
>>>>>        3af1:       48 87 0c 24             xchg   %rcx,(%rsp)
>>>>>        
>>>> ^^^ fault, but not at (%rsp)
>>>>      
>>> Can you please post the full oops (including kernel debug messages
>>> during boot) or give me a pointer to the original message?
>> http://www.mail-archive.com/kvm@vger.kernel.org/msg23458.html
>>
>>> Also, does
>>> the faulting address coincide with any symbol?
>>>    
>> No (at least, not in System.map).
> 
> Has there been any progress?  Is kvm + oprofile still broken?
>

I just tried testing tip of kvm.git, but unfortunately I think I might 
be hitting a different problem, where processes run 100% in kernel mode. 
  In my case, cpus 9 and 13 were stuck, running qemu processes.  A stack 
backtrace for both cpus are below.  FWIW, kernel.org 2.6.32-rc7 does not 
have this problem, or the original problem.


> NMI backtrace for cpu 9
> CPU 9:
> Modules linked in: tun sunrpc af_packet bridge stp ipv6 binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod kvm_intel kvm uinput sr_mod cdrom ata_generic pata_acpi ata_piix joydev libata ide_pci_generic usbhid ide_core hid serio_raw cdc_ether usbnet mii matroxfb_base matroxfb_DAC1064 matroxfb_accel matroxfb_Ti3026 matroxfb_g450 g450_pll matroxfb_misc iTCO_wdt i2c_i801 i2c_core pcspkr iTCO_vendor_support ioatdma thermal rtc_cmos rtc_core bnx2 rtc_lib dca thermal_sys hwmon sg button shpchp pci_hotplug qla2xxx scsi_transport_fc scsi_tgt sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: processor]
> Pid: 5687, comm: qemu-system-x86 Not tainted 2.6.32-rc7-5e8cb552cb8b48244b6d07bff984b3c4080d4bc9-autokern1 #1  -[7947AC1]-
> RIP: 0010:[<ffffffff810b802b>]  [<ffffffff810b802b>] fire_user_return_notifiers+0x31/0x36
> RSP: 0018:ffff88095024df08  EFLAGS: 00000246
> RAX: 0000000000000000 RBX: 0000000000000800 RCX: ffff88095024c000
> RDX: ffff880028340000 RSI: 0000000000000000 RDI: ffff88095024df58
> RBP: ffff88095024df18 R08: 0000000000000000 R09: 0000000000000001
> R10: 000000caf1fff62d R11: ffff8805b584de40 R12: 00007fffae48e0f0
> R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
> FS:  00007f45c69d57c0(0000) GS:ffff880028340000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: fffff9800121056e CR3: 0000000953d36000 CR4: 00000000000026e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Call Trace:
>  <#DB[1]>  <<EOE>> Pid: 5687, comm: qemu-system-x86 Not tainted 2.6.32-rc7-5e8cb552cb8b48244b6d07bff984b3c4080d4bc9-autokern1 #1
> Call Trace:
>  <NMI>  [<ffffffff8100af53>] ? show_regs+0x44/0x49
>  [<ffffffff812e57b2>] nmi_watchdog_tick+0xc2/0x1b9
>  [<ffffffff812e4e73>] do_nmi+0xb0/0x252
>  [<ffffffff812e48a0>] nmi+0x20/0x30
>  [<ffffffff810b802b>] ? fire_user_return_notifiers+0x31/0x36
>  <<EOE>>  [<ffffffff8100b844>] do_notify_resume+0x62/0x69
>  [<ffffffff8100bf48>] ? int_check_syscall_exit_work+0x9/0x3d
>  [<ffffffff8100bf8e>] int_signal+0x12/0x17

> NMI backtrace for cpu 13
> CPU 13:
> Modules linked in: tun sunrpc af_packet bridge stp ipv6 binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod kvm_intel kvm uinput sr_mod cdrom ata_generic pata_acpi ata_piix joydev libata ide_pci_generic usbhid ide_core hid serio_raw cdc_ether usbnet mii matroxfb_base matroxfb_DAC1064 matroxfb_accel matroxfb_Ti3026 matroxfb_g450 g450_pll matroxfb_misc iTCO_wdt i2c_i801 i2c_core pcspkr iTCO_vendor_support ioatdma thermal rtc_cmos rtc_core bnx2 rtc_lib dca thermal_sys hwmon sg button shpchp pci_hotplug qla2xxx scsi_transport_fc scsi_tgt sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: processor]
> Pid: 5792, comm: qemu-system-x86 Not tainted 2.6.32-rc7-5e8cb552cb8b48244b6d07bff984b3c4080d4bc9-autokern1 #1  -[7947AC1]-
> RIP: 0010:[<ffffffff8100bfb0>]  [<ffffffff8100bfb0>] int_restore_rest+0x1d/0x3d
> RSP: 0018:ffff88124f491f58  EFLAGS: 00000292
> RAX: 0000000000000800 RBX: 00007fff9df852e0 RCX: ffff88124f490000
> RDX: ffff88099ff40000 RSI: 0000000000000000 RDI: 000000000000fe2e
> RBP: 00007fff9df85260 R08: ffff88124f490000 R09: 0000000000000000
> R10: 0000000000000005 R11: ffff880954971da0 R12: 00007fff9df851e0
> R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
> FS:  00007f73b5b1d7c0(0000) GS:ffff88099ff40000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 00007f8d5a8de9d0 CR3: 0000000eb34d7000 CR4: 00000000000026e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Call Trace:
>  <#DB[1]>  <<EOE>> Pid: 5792, comm: qemu-system-x86 Not tainted 2.6.32-rc7-5e8cb552cb8b48244b6d07bff984b3c4080d4bc9-autokern1 #1
> Call Trace:
>  <NMI>  [<ffffffff8100af53>] ? show_regs+0x44/0x49
>  [<ffffffff812e57b2>] nmi_watchdog_tick+0xc2/0x1b9
>  [<ffffffff812e4e73>] do_nmi+0xb0/0x252
>  [<ffffffff812e48a0>] nmi+0x20/0x30
>  [<ffffffff8100bfb0>] ? int_restore_rest+0x1d/0x3d
>  <<EOE>> 


-Andrew



  reply	other threads:[~2009-11-26  1:35 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-09 20:04 kernel bug in kvm_intel Andrew Theurer
2009-10-11  5:19 ` Avi Kivity
2009-10-12 18:42   ` Andrew Theurer
2009-10-13  6:50     ` Avi Kivity
2009-10-13 14:04       ` Andrew Theurer
2009-10-14 17:10         ` Avi Kivity
2009-10-15 20:18           ` Andrew Theurer
2009-10-30 18:07             ` Andrew Theurer
2009-10-31 15:47               ` Avi Kivity
2009-10-31 16:25                 ` Andrew Theurer
2009-10-31 16:32                   ` Avi Kivity
2009-10-31 16:38                     ` Avi Kivity
2009-11-01 10:00                       ` Tejun Heo
2009-11-01 10:20                         ` Avi Kivity
2009-11-01 10:45                           ` Tejun Heo
2009-11-01 11:31                             ` Avi Kivity
2009-11-18  9:26                               ` Tejun Heo
2009-11-26  1:35                                 ` Andrew Theurer [this message]
2009-11-26  1:41                                   ` Tejun Heo
2009-11-26 10:31                                   ` Avi Kivity
2009-11-26 13:47                                     ` Andrew Theurer
2009-11-29 14:46                                   ` Avi Kivity
2009-11-30 16:27                                     ` Andrew Theurer
2009-10-13 14:31       ` Marcelo Tosatti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B0DDB5D.9030202@linux.vnet.ibm.com \
    --to=habanero@linux.vnet.ibm.com \
    --cc=Linux-kernel@vger.kernel.org \
    --cc=avi@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).