# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.7-r710virt (root@NSC045.local) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Wed Feb 3 10:04:00 CET 2010 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.7-r710virt root=UUID=2f33521a-a6c5-4a4c-926d-6d9d9aaa62b5 ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf699000 (usable) [ 0.000000] BIOS-e820: 00000000cf699000 - 00000000cf6af000 (reserved) [ 0.000000] BIOS-e820: 00000000cf6af000 - 00000000cf6ce000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable) [ 0.000000] DMI 2.6 present. [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 base 0100000000 mask FF00000000 write-back [ 0.000000] 4 base 0200000000 mask FE00000000 write-back [ 0.000000] 5 base 0400000000 mask FFC0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcf699 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cf699000 [ 0.000000] 0000000000 - 00cf600000 page 2M [ 0.000000] 00cf600000 - 00cf699000 page 4k [ 0.000000] kernel direct mapping tables up to cf699000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000430000000 [ 0.000000] 0100000000 - 0430000000 page 2M [ 0.000000] kernel direct mapping tables up to 430000000 @ c000-1e000 [ 0.000000] RAMDISK: 37c52000 - 37fef6e9 [ 0.000000] ACPI: RSDP 00000000000f10b0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000f11b4 0009C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: FACP 00000000cf6c3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DSDT 00000000cf6af000 03AB9 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000cf6c6000 00040 [ 0.000000] ACPI: APIC 00000000cf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SPCR 00000000cf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HPET 00000000cf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DMAR 00000000cf6c3668 001B0 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: MCFG 00000000cf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: WD__ 00000000cf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SLIC 00000000cf6c3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: ERST 00000000cf6b2c3c 00270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HEST 00000000cf6b2eac 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: BERT 00000000cf6b2abc 00030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: EINJ 00000000cf6b2aec 00150 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SRAT 00000000cf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: TCPA 00000000cf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SSDT 00000000cf6c7000 01DEC (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0430000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001532cd8] TEXT DATA BSS ==> [0001000000 - 0001532cd8] [ 0.000000] #3 [0037c52000 - 0037fef6e9] RAMDISK ==> [0037c52000 - 0037fef6e9] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [0001533000 - 0001533501] BRK ==> [0001533000 - 0001533501] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 0000019000] PGTABLE ==> [000000c000 - 0000019000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880028600000-ffff8800367fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00430000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x000cf699 [ 0.000000] 0: 0x00100000 -> 0x00430000 [ 0.000000] On node 0 totalpages: 4191801 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 117 pages reserved [ 0.000000] DMA zone: 3827 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 831185 pages, LIFO batch:31 [ 0.000000] Normal zone: 45696 pages used for memmap [ 0.000000] Normal zone: 3296640 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32]) [ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 32 CPUs, 24 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880036800000 s77976 r8192 d24424 u131072 [ 0.000000] pcpu-alloc: s77976 r8192 d24424 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4131652 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.7-r710virt root=UUID=2f33521a-a6c5-4a4c-926d-6d9d9aaa62b5 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 16431508k/17563648k available (2562k kernel code, 796444k absent, 334796k reserved, 1568k data, 408k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 1994.647 MHz processor. [ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.29 BogoMIPS (lpj=1994647) [ 0.000204] Security Framework initialized [ 0.000295] Mount-cache hash table entries: 256 [ 0.000509] Initializing cgroup subsys ns [ 0.000580] Initializing cgroup subsys cpuacct [ 0.000656] Initializing cgroup subsys devices [ 0.000726] Initializing cgroup subsys net_cls [ 0.000821] CPU: Physical Processor ID: 1 [ 0.000889] CPU: Processor Core ID: 0 [ 0.000959] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001073] CPU: L2 cache: 256K [ 0.001140] CPU: L3 cache: 4096K [ 0.001217] mce: CPU supports 9 MCE banks [ 0.001296] CPU0: Thermal monitoring enabled (TM1) [ 0.001369] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 [ 0.001713] using mwait in idle threads. [ 0.001782] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.001949] ... version: 3 [ 0.002017] ... bit width: 48 [ 0.002086] ... generic registers: 4 [ 0.002154] ... value mask: 0000ffffffffffff [ 0.002233] ... max period: 000000007fffffff [ 0.002304] ... fixed-purpose events: 3 [ 0.002372] ... event mask: 000000070000000f [ 0.002461] ACPI: Core revision 20090903 [ 0.011445] Setting APIC routing to flat [ 0.011985] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.022052] CPU0: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05 [ 0.124245] Booting processor 1 APIC 0x0 ip 0x6000 [ 0.134589] Initializing CPU#1 [ 0.195046] CPU: Physical Processor ID: 0 [ 0.195047] CPU: Processor Core ID: 0 [ 0.195050] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.195051] CPU: L2 cache: 256K [ 0.195052] CPU: L3 cache: 4096K [ 0.195065] CPU1: Thermal monitoring enabled (TM1) [ 0.195068] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 [ 0.195098] CPU1: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05 [ 0.201081] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.221302] Booting processor 2 APIC 0x12 ip 0x6000 [ 0.231910] Initializing CPU#2 [ 0.291976] CPU: Physical Processor ID: 1 [ 0.291977] CPU: Processor Core ID: 1 [ 0.291979] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.291981] CPU: L2 cache: 256K [ 0.291982] CPU: L3 cache: 4096K [ 0.291994] CPU2: Thermal monitoring enabled (TM1) [ 0.291997] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.292055] CPU2: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05 [ 0.292765] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.313019] Booting processor 3 APIC 0x2 ip 0x6000 [ 0.323362] Initializing CPU#3 [ 0.383908] CPU: Physical Processor ID: 0 [ 0.383909] CPU: Processor Core ID: 1 [ 0.383911] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.383913] CPU: L2 cache: 256K [ 0.383914] CPU: L3 cache: 4096K [ 0.383926] CPU3: Thermal monitoring enabled (TM1) [ 0.383930] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.383970] CPU3: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05 [ 0.384676] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.404883] Booting processor 4 APIC 0x14 ip 0x6000 [ 0.415233] Initializing CPU#4 [ 0.475841] CPU: Physical Processor ID: 1 [ 0.475842] CPU: Processor Core ID: 2 [ 0.475844] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.475846] CPU: L2 cache: 256K [ 0.475847] CPU: L3 cache: 4096K [ 0.475859] CPU4: Thermal monitoring enabled (TM1) [ 0.475862] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.475941] CPU4: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05 [ 0.476649] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 0.496903] Booting processor 5 APIC 0x4 ip 0x6000 [ 0.507246] Initializing CPU#5 [ 0.567773] CPU: Physical Processor ID: 0 [ 0.567775] CPU: Processor Core ID: 2 [ 0.567777] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.567778] CPU: L2 cache: 256K [ 0.567779] CPU: L3 cache: 4096K [ 0.567792] CPU5: Thermal monitoring enabled (TM1) [ 0.567795] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.567849] CPU5: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05 [ 0.568556] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 0.588767] Booting processor 6 APIC 0x16 ip 0x6000 [ 0.599114] Initializing CPU#6 [ 0.659706] CPU: Physical Processor ID: 1 [ 0.659707] CPU: Processor Core ID: 3 [ 0.659710] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.659711] CPU: L2 cache: 256K [ 0.659712] CPU: L3 cache: 4096K [ 0.659725] CPU6: Thermal monitoring enabled (TM1) [ 0.659728] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.659822] CPU6: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05 [ 0.660529] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 0.680784] Booting processor 7 APIC 0x6 ip 0x6000 [ 0.691128] Initializing CPU#7 [ 0.751639] CPU: Physical Processor ID: 0 [ 0.751640] CPU: Processor Core ID: 3 [ 0.751642] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.751644] CPU: L2 cache: 256K [ 0.751645] CPU: L3 cache: 4096K [ 0.751657] CPU7: Thermal monitoring enabled (TM1) [ 0.751660] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.751737] CPU7: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05 [ 0.752444] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 0.772590] Brought up 8 CPUs [ 0.772660] Total of 8 processors activated (31914.97 BogoMIPS). [ 0.774917] CPU0 attaching sched-domain: [ 0.774922] domain 0: span 0,2,4,6 level MC [ 0.774925] groups: 0 2 4 6 [ 0.774929] domain 1: span 0-7 level CPU [ 0.774931] groups: 0,2,4,6 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) [ 0.774939] CPU1 attaching sched-domain: [ 0.774941] domain 0: span 1,3,5,7 level MC [ 0.774943] groups: 1 3 5 7 [ 0.774947] domain 1: span 0-7 level CPU [ 0.774948] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) [ 0.774954] CPU2 attaching sched-domain: [ 0.774956] domain 0: span 0,2,4,6 level MC [ 0.774958] groups: 2 4 6 0 [ 0.774962] domain 1: span 0-7 level CPU [ 0.774964] groups: 0,2,4,6 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) [ 0.774969] CPU3 attaching sched-domain: [ 0.774971] domain 0: span 1,3,5,7 level MC [ 0.774973] groups: 3 5 7 1 [ 0.774977] domain 1: span 0-7 level CPU [ 0.774979] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) [ 0.774984] CPU4 attaching sched-domain: [ 0.774986] domain 0: span 0,2,4,6 level MC [ 0.774988] groups: 4 6 0 2 [ 0.774992] domain 1: span 0-7 level CPU [ 0.774994] groups: 0,2,4,6 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) [ 0.774999] CPU5 attaching sched-domain: [ 0.775001] domain 0: span 1,3,5,7 level MC [ 0.775003] groups: 5 7 1 3 [ 0.775007] domain 1: span 0-7 level CPU [ 0.775008] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) [ 0.775014] CPU6 attaching sched-domain: [ 0.775016] domain 0: span 0,2,4,6 level MC [ 0.775018] groups: 6 0 2 4 [ 0.775022] domain 1: span 0-7 level CPU [ 0.775023] groups: 0,2,4,6 (cpu_power = 4096) 1,3,5,7 (cpu_power = 4096) [ 0.775029] CPU7 attaching sched-domain: [ 0.775031] domain 0: span 1,3,5,7 level MC [ 0.775033] groups: 7 1 3 5 [ 0.775036] domain 1: span 0-7 level CPU [ 0.775038] groups: 1,3,5,7 (cpu_power = 4096) 0,2,4,6 (cpu_power = 4096) [ 0.776083] NET: Registered protocol family 16 [ 0.776467] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.776559] ACPI: bus type pci registered [ 0.776811] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.776888] PCI: MCFG area at e0000000 reserved in E820 [ 0.781230] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.781302] PCI: Using configuration type 1 for base access [ 0.783403] bio: create slab at 0 [ 0.784084] ACPI: EC: Look up EC in DSDT [ 0.786418] ACPI: BIOS _OSI(Linux) query ignored [ 0.786627] ACPI: Interpreter enabled [ 0.786699] ACPI: (supports S0 S5) [ 0.786863] ACPI: Using IOAPIC for interrupt routing [ 0.794765] ACPI: No dock devices found. [ 0.795343] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.795525] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.795601] pci 0000:00:00.0: PME# disabled [ 0.795733] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.795808] pci 0000:00:01.0: PME# disabled [ 0.795950] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.796025] pci 0000:00:03.0: PME# disabled [ 0.796156] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.796230] pci 0000:00:04.0: PME# disabled [ 0.796363] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.796438] pci 0000:00:05.0: PME# disabled [ 0.796569] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.796644] pci 0000:00:06.0: PME# disabled [ 0.796777] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.796851] pci 0000:00:07.0: PME# disabled [ 0.796988] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.797063] pci 0000:00:09.0: PME# disabled [ 0.797334] pci 0000:00:1a.0: reg 20 io port: [0xec40-0xec5f] [ 0.797403] pci 0000:00:1a.1: reg 20 io port: [0xec60-0xec7f] [ 0.797476] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff] [ 0.797530] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.797605] pci 0000:00:1a.7: PME# disabled [ 0.797725] pci 0000:00:1d.0: reg 20 io port: [0xec80-0xec9f] [ 0.797793] pci 0000:00:1d.1: reg 20 io port: [0xeca0-0xecbf] [ 0.797869] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff] [ 0.797922] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.797998] pci 0000:00:1d.7: PME# disabled [ 0.798188] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.798282] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO [ 0.798358] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) [ 0.798451] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 0.798544] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f) [ 0.798710] pci 0000:01:00.0: reg 10 64bit mmio: [0xd6000000-0xd7ffffff] [ 0.798761] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.798836] pci 0000:01:00.0: PME# disabled [ 0.798955] pci 0000:01:00.1: reg 10 64bit mmio: [0xd8000000-0xd9ffffff] [ 0.799006] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.799081] pci 0000:01:00.1: PME# disabled [ 0.799181] pci 0000:00:01.0: bridge 32bit mmio: [0xd6000000-0xd9ffffff] [ 0.799230] pci 0000:02:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff] [ 0.799281] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.799356] pci 0000:02:00.0: PME# disabled [ 0.799472] pci 0000:02:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff] [ 0.799523] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.799598] pci 0000:02:00.1: PME# disabled [ 0.799698] pci 0000:00:03.0: bridge 32bit mmio: [0xda000000-0xddffffff] [ 0.799731] pci 0000:03:00.0: reg 10 64bit mmio: [0xdf180000-0xdf1bffff] [ 0.799737] pci 0000:03:00.0: reg 18 io port: [0xfc00-0xfcff] [ 0.799747] pci 0000:03:00.0: reg 1c 64bit mmio: [0xdf1c0000-0xdf1fffff] [ 0.799758] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xdf100000-0xdf107fff] [ 0.799787] pci 0000:03:00.0: supports D1 [ 0.799819] pci 0000:00:04.0: bridge io port: [0xf000-0xffff] [ 0.799823] pci 0000:00:04.0: bridge 32bit mmio: [0xdf100000-0xdf1fffff] [ 0.799978] pci 0000:08:03.0: reg 10 32bit mmio pref: [0xd5800000-0xd5ffffff] [ 0.799985] pci 0000:08:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff] [ 0.799992] pci 0000:08:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff] [ 0.800012] pci 0000:08:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.800070] pci 0000:00:1e.0: transparent bridge [ 0.800144] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff] [ 0.800150] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd5800000-0xd5ffffff] [ 0.800178] pci_bus 0000:00: on NUMA node 0 [ 0.800182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.800733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.800841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.800952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.801058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.801164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] [ 0.801270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT] [ 0.801379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT] [ 0.801490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] [ 0.806098] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15) [ 0.806789] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.807481] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.808171] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.808859] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.809551] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15) [ 0.810240] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.811037] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15) [ 0.811824] vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none [ 0.811918] vgaarb: loaded [ 0.812098] usbcore: registered new interface driver usbfs [ 0.812242] usbcore: registered new interface driver hub [ 0.812367] usbcore: registered new device driver usb [ 0.812585] PCI: Using ACPI for IRQ routing [ 0.812919] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.813218] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.819745] Switching to clocksource tsc [ 0.821348] pnp: PnP ACPI init [ 0.821432] ACPI: bus type pnp registered [ 0.825651] pnp: PnP ACPI: found 13 devices [ 0.825721] ACPI: ACPI bus type pnp unregistered [ 0.825802] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.825878] system 00:07: ioport range 0x880-0x8ff could not be reserved [ 0.825953] system 00:07: ioport range 0x900-0x91f has been reserved [ 0.826028] system 00:07: ioport range 0x920-0x923 has been reserved [ 0.826106] system 00:07: ioport range 0x924-0x924 has been reserved [ 0.826181] system 00:07: ioport range 0xc00-0xc7f has been reserved [ 0.826256] system 00:07: ioport range 0xca0-0xca7 has been reserved [ 0.826330] system 00:07: ioport range 0xca9-0xcab has been reserved [ 0.826405] system 00:07: ioport range 0xcad-0xcaf has been reserved [ 0.826482] system 00:08: ioport range 0xca8-0xca8 has been reserved [ 0.826556] system 00:08: ioport range 0xcac-0xcac has been reserved [ 0.826636] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.826715] system 00:0c: iomem range 0xfed90000-0xfed91fff has been reserved [ 0.831896] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.831969] pci 0000:00:01.0: IO window: disabled [ 0.832042] pci 0000:00:01.0: MEM window: 0xd6000000-0xd9ffffff [ 0.832118] pci 0000:00:01.0: PREFETCH window: disabled [ 0.832194] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 [ 0.832266] pci 0000:00:03.0: IO window: disabled [ 0.832339] pci 0000:00:03.0: MEM window: 0xda000000-0xddffffff [ 0.832414] pci 0000:00:03.0: PREFETCH window: disabled [ 0.832489] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03 [ 0.832563] pci 0000:00:04.0: IO window: 0xf000-0xffff [ 0.832637] pci 0000:00:04.0: MEM window: 0xdf100000-0xdf1fffff [ 0.832711] pci 0000:00:04.0: PREFETCH window: disabled [ 0.832786] pci 0000:00:05.0: PCI bridge, secondary bus 0000:04 [ 0.832859] pci 0000:00:05.0: IO window: disabled [ 0.832932] pci 0000:00:05.0: MEM window: disabled [ 0.833005] pci 0000:00:05.0: PREFETCH window: disabled [ 0.833081] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05 [ 0.833154] pci 0000:00:06.0: IO window: disabled [ 0.833227] pci 0000:00:06.0: MEM window: disabled [ 0.838594] pci 0000:00:06.0: PREFETCH window: disabled [ 0.838669] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06 [ 0.838742] pci 0000:00:07.0: IO window: disabled [ 0.838814] pci 0000:00:07.0: MEM window: disabled [ 0.838887] pci 0000:00:07.0: PREFETCH window: disabled [ 0.838962] pci 0000:00:09.0: PCI bridge, secondary bus 0000:07 [ 0.839035] pci 0000:00:09.0: IO window: disabled [ 0.839113] pci 0000:00:09.0: MEM window: disabled [ 0.839185] pci 0000:00:09.0: PREFETCH window: disabled [ 0.839262] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 0.839335] pci 0000:00:1e.0: IO window: disabled [ 0.839408] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff [ 0.839483] pci 0000:00:1e.0: PREFETCH window: 0x000000d5800000-0x000000d5ffffff [ 0.839590] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.839667] pci 0000:00:01.0: setting latency timer to 64 [ 0.839674] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.839750] pci 0000:00:03.0: setting latency timer to 64 [ 0.839757] pci 0000:00:04.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.839833] pci 0000:00:04.0: setting latency timer to 64 [ 0.839839] pci 0000:00:05.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.839915] pci 0000:00:05.0: setting latency timer to 64 [ 0.839922] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.839998] pci 0000:00:06.0: setting latency timer to 64 [ 0.840004] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.840082] pci 0000:00:07.0: setting latency timer to 64 [ 0.840089] pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.840165] pci 0000:00:09.0: setting latency timer to 64 [ 0.840170] pci 0000:00:1e.0: setting latency timer to 64 [ 0.840175] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.840177] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.840180] pci_bus 0000:01: resource 1 mem: [0xd6000000-0xd9ffffff] [ 0.840182] pci_bus 0000:02: resource 1 mem: [0xda000000-0xddffffff] [ 0.840185] pci_bus 0000:03: resource 0 io: [0xf000-0xffff] [ 0.840187] pci_bus 0000:03: resource 1 mem: [0xdf100000-0xdf1fffff] [ 0.840190] pci_bus 0000:08: resource 1 mem: [0xde000000-0xdeffffff] [ 0.840192] pci_bus 0000:08: resource 2 pref mem [0xd5800000-0xd5ffffff] [ 0.840194] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 0.840196] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.840264] NET: Registered protocol family 2 [ 0.840460] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.841578] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.842844] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.843249] TCP: Hash tables configured (established 262144 bind 65536) [ 0.843324] TCP reno registered [ 0.843677] NET: Registered protocol family 1 [ 0.854124] pci 0000:08:03.0: Boot video device [ 0.854175] Trying to unpack rootfs image as initramfs... [ 0.946973] Freeing initrd memory: 3701k freed [ 0.950828] audit: initializing netlink socket (disabled) [ 0.950912] type=2000 audit(1266152170.711:1): initialized [ 0.951893] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.952284] VFS: Disk quotas dquot_6.5.2 [ 0.952385] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.952519] msgmni has been set to 32101 [ 0.952852] alg: No test for stdrng (krng) [ 0.952986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.953086] io scheduler noop registered [ 0.953154] io scheduler anticipatory registered [ 0.953224] io scheduler deadline registered [ 0.953312] io scheduler cfq registered (default) [ 0.953545] pcieport 0000:00:01.0: irq 56 for MSI/MSI-X [ 0.953553] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.953735] pcieport 0000:00:03.0: irq 57 for MSI/MSI-X [ 0.953742] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.953968] pcieport 0000:00:04.0: irq 58 for MSI/MSI-X [ 0.953974] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.954157] pcieport 0000:00:05.0: irq 59 for MSI/MSI-X [ 0.954164] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.954340] pcieport 0000:00:06.0: irq 60 for MSI/MSI-X [ 0.954347] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.954523] pcieport 0000:00:07.0: irq 61 for MSI/MSI-X [ 0.954529] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.954706] pcieport 0000:00:09.0: irq 62 for MSI/MSI-X [ 0.954712] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.955182] aer 0000:00:01.0:pcie02: service driver aer loaded [ 0.955220] aer 0000:00:03.0:pcie02: service driver aer loaded [ 0.955255] aer 0000:00:04.0:pcie02: service driver aer loaded [ 0.955290] aer 0000:00:05.0:pcie02: service driver aer loaded [ 0.955324] aer 0000:00:06.0:pcie02: service driver aer loaded [ 0.955358] aer 0000:00:07.0:pcie02: service driver aer loaded [ 0.955392] aer 0000:00:09.0:pcie02: service driver aer loaded [ 0.959117] Linux agpgart interface v0.103 [ 0.959191] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.959404] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.959607] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.960075] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.960342] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.962613] brd: module loaded [ 0.962941] PNP: No PS/2 controller found. Probing ports directly. [ 0.965844] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.965918] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.966202] mice: PS/2 mouse device common for all mice [ 0.966323] cpuidle: using governor ladder [ 0.966397] cpuidle: using governor menu [ 0.966468] No iBFT detected. [ 0.966847] TCP cubic registered [ 0.966914] NET: Registered protocol family 17 [ 0.967144] registered taskstats version 1 [ 0.967825] Freeing unused kernel memory: 408k freed [ 1.261448] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) [ 1.261570] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 [ 1.261649] bnx2 0000:01:00.0: setting latency timer to 64 [ 1.261779] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw [ 1.279443] SCSI subsystem initialized [ 1.280855] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 1.280942] megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 3:slot 0:func 0 [ 1.281077] megaraid_sas 0000:03:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 [ 1.281172] megaraid_sas 0000:03:00.0: setting latency timer to 64 [ 1.283180] megasas: FW now in Ready state [ 1.286242] uhci_hcd: USB Universal Host Controller Interface driver [ 1.286364] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.286447] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.286450] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.286590] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.286720] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40 [ 1.286831] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.286906] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.286997] usb usb1: Product: UHCI Host Controller [ 1.287068] usb usb1: Manufacturer: Linux 2.6.32.7-r710virt uhci_hcd [ 1.287142] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.287254] usb usb1: configuration #1 chosen from 1 choice [ 1.287353] hub 1-0:1.0: USB hub found [ 1.287425] hub 1-0:1.0: 2 ports detected [ 1.287553] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1.287633] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.287636] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.287741] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 1.287860] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60 [ 1.287961] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.288037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.288127] usb usb2: Product: UHCI Host Controller [ 1.288198] usb usb2: Manufacturer: Linux 2.6.32.7-r710virt uhci_hcd [ 1.288272] usb usb2: SerialNumber: 0000:00:1a.1 [ 1.288377] usb usb2: configuration #1 chosen from 1 choice [ 1.288472] hub 2-0:1.0: USB hub found [ 1.288543] hub 2-0:1.0: 2 ports detected [ 1.288611] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.288616] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 1.288859] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 1.288961] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.288964] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.289084] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 1.289199] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.293149] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.293164] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800 [ 1.302694] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.302793] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.302868] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.302960] usb usb3: Product: EHCI Host Controller [ 1.303031] usb usb3: Manufacturer: Linux 2.6.32.7-r710virt ehci_hcd [ 1.303104] usb usb3: SerialNumber: 0000:00:1a.7 [ 1.303228] usb usb3: configuration #1 chosen from 1 choice [ 1.303327] hub 3-0:1.0: USB hub found [ 1.303405] hub 3-0:1.0: 4 ports detected [ 1.303554] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.303638] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.303642] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.303767] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.303891] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80 [ 1.303998] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.304073] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.304164] usb usb4: Product: UHCI Host Controller [ 1.304235] usb usb4: Manufacturer: Linux 2.6.32.7-r710virt uhci_hcd [ 1.304309] usb usb4: SerialNumber: 0000:00:1d.0 [ 1.304421] usb usb4: configuration #1 chosen from 1 choice [ 1.304518] hub 4-0:1.0: USB hub found [ 1.304591] hub 4-0:1.0: 2 ports detected [ 1.304736] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.304829] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.304832] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.304937] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 1.305052] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.309008] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.309017] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00 [ 1.312858] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 1.314650] scsi0 : LSI SAS based MegaRAID driver [ 1.315845] scsi 0:0:0:0: Direct-Access SEAGATE ST3300656SS HS0F PQ: 0 ANSI: 5 [ 1.316786] scsi 0:0:1:0: Direct-Access SEAGATE ST3300656SS HS0F PQ: 0 ANSI: 5 [ 1.318691] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.318786] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.318864] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.318955] usb usb5: Product: EHCI Host Controller [ 1.319026] usb usb5: Manufacturer: Linux 2.6.32.7-r710virt ehci_hcd [ 1.319099] usb usb5: SerialNumber: 0000:00:1d.7 [ 1.319215] usb usb5: configuration #1 chosen from 1 choice [ 1.319312] hub 5-0:1.0: USB hub found [ 1.319385] hub 5-0:1.0: 4 ports detected [ 1.319530] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.319615] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.319618] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.319806] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.319931] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0 [ 1.320038] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.320113] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.320204] usb usb6: Product: UHCI Host Controller [ 1.320275] usb usb6: Manufacturer: Linux 2.6.32.7-r710virt uhci_hcd [ 1.320348] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.320464] usb usb6: configuration #1 chosen from 1 choice [ 1.320564] hub 6-0:1.0: USB hub found [ 1.320637] hub 6-0:1.0: 2 ports detected [ 1.337842] eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr 00:26:b9:7b:8b:cf [ 1.337978] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48 [ 1.338058] bnx2 0000:01:00.1: setting latency timer to 64 [ 1.338185] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw [ 1.350837] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 1.353444] eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr 00:26:b9:7b:8b:d1 [ 1.353571] bnx2 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 [ 1.353650] bnx2 0000:02:00.0: setting latency timer to 64 [ 1.353777] bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw [ 1.356678] bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 1.359205] eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr 00:26:b9:7b:8b:d3 [ 1.359327] bnx2 0000:02:00.1: PCI INT B -> GSI 42 (level, low) -> IRQ 42 [ 1.359406] bnx2 0000:02:00.1: setting latency timer to 64 [ 1.359519] bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw [ 1.362394] bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 1.364918] eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr 00:26:b9:7b:8b:d5 [ 1.420222] scsi 0:0:32:0: Enclosure DP BACKPLANE 1.07 PQ: 0 ANSI: 5 [ 1.431091] scsi 0:2:0:0: Direct-Access DELL PERC 6/i 1.22 PQ: 0 ANSI: 5 [ 1.431302] scsi 0:2:1:0: Direct-Access DELL PERC 6/i 1.22 PQ: 0 ANSI: 5 [ 1.453840] sd 0:2:0:0: [sda] 584843264 512-byte logical blocks: (299 GB/278 GiB) [ 1.453847] sd 0:2:1:0: [sdb] 584843264 512-byte logical blocks: (299 GB/278 GiB) [ 1.454114] sd 0:2:1:0: [sdb] Write Protect is off [ 1.454127] sd 0:2:0:0: [sda] Write Protect is off [ 1.454130] sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08 [ 1.454183] sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 1.454355] sd 0:2:1:0: [sdb] Mode Sense: 1f 00 10 08 [ 1.454394] sda: [ 1.454455] sd 0:2:1:0: [sdb] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 1.454738] sda1 sda2 sda3 sda4 [ 1.455151] sdb: [ 1.462886] sd 0:2:0:0: [sda] Attached SCSI disk [ 1.466494] unknown partition table [ 1.466783] sd 0:2:1:0: [sdb] Attached SCSI disk [ 1.606395] usb 3-3: new high speed USB device using ehci_hcd and address 2 [ 1.606487] REISERFS (device sda2): found reiserfs format "3.6" with standard journal [ 1.606602] REISERFS (device sda2): using ordered data mode [ 1.609201] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 1.609694] REISERFS (device sda2): checking transaction log (sda2) [ 1.617230] REISERFS (device sda2): Using r5 hash to sort names [ 1.720666] usb 3-3: New USB device found, idVendor=0424, idProduct=2514 [ 1.720748] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.720890] usb 3-3: configuration #1 chosen from 1 choice [ 1.721066] hub 3-3:1.0: USB hub found [ 1.721285] hub 3-3:1.0: 3 ports detected [ 1.926146] usb 5-3: new high speed USB device using ehci_hcd and address 3 [ 2.040979] usb 5-3: New USB device found, idVendor=0624, idProduct=0249 [ 2.041063] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.041145] usb 5-3: Product: USB Composite Device-1 [ 2.041216] usb 5-3: Manufacturer: Avocent [ 2.041284] usb 5-3: SerialNumber: 20080519-1 [ 2.041428] usb 5-3: configuration #1 chosen from 1 choice [ 2.207299] udevd version 125 started [ 2.247938] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 2.359291] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 2.399392] usb 4-2: New USB device found, idVendor=0624, idProduct=0248 [ 2.399475] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.399550] usb 4-2: Product: USB Composite Device-0 [ 2.399621] usb 4-2: Manufacturer: Avocent [ 2.399695] usb 4-2: SerialNumber: 20080519 [ 2.399841] usb 4-2: configuration #1 chosen from 1 choice [ 2.542841] ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286) [ 2.543035] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88042f854fb0), AE_AML_BUFFER_LIMIT [ 2.543291] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88042f854430), AE_AML_BUFFER_LIMIT [ 2.543543] ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC (20090903/power_meter-772) [ 2.545218] Monitor-Mwait will be used to enter C-1 state [ 2.551293] Monitor-Mwait will be used to enter C-3 state [ 2.551383] processor LNXCPU:00: registered as cooling_device0 [ 2.551524] input: Power Button as /class/input/input0 [ 2.551600] ACPI: Power Button [PWRF] [ 2.591742] processor LNXCPU:01: registered as cooling_device1 [ 2.612820] processor LNXCPU:02: registered as cooling_device2 [ 2.626815] processor LNXCPU:03: registered as cooling_device3 [ 2.629337] Initializing USB Mass Storage driver... [ 2.629512] scsi1 : SCSI emulation for USB Mass Storage devices [ 2.629845] usb-storage: device found at 3 [ 2.629847] usb-storage: waiting for device to settle before scanning [ 2.629862] usbcore: registered new interface driver usb-storage [ 2.629937] USB Mass Storage support registered. [ 2.634812] processor LNXCPU:04: registered as cooling_device4 [ 2.637064] input: PC Speaker as /class/input/input1 [ 2.639397] processor LNXCPU:05: registered as cooling_device5 [ 2.640173] processor LNXCPU:06: registered as cooling_device6 [ 2.640946] processor LNXCPU:07: registered as cooling_device7 [ 2.664883] usbcore: registered new interface driver hiddev [ 2.669511] input: Avocent USB Composite Device-0 as /class/input/input2 [ 2.669641] generic-usb 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0 [ 2.673428] input: Avocent USB Composite Device-0 as /class/input/input3 [ 2.673562] generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1 [ 2.673710] usbcore: registered new interface driver usbhid [ 2.673783] usbhid: v2.6:USB HID core driver [ 3.174312] Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k [ 7.626692] usb-storage: device scan complete [ 7.634076] scsi 1:0:0:0: CD-ROM iDRAC Virtual CD 0323 PQ: 0 ANSI: 0 [ 7.636288] scsi 1:0:0:1: Direct-Access iDRAC Virtual Floppy 0323 PQ: 0 ANSI: 0 CCS [ 7.642219] sd 1:0:0:1: [sdc] Attached SCSI removable disk [ 7.672968] scsi 0:0:32:0: Attached scsi generic sg0 type 13 [ 7.673150] sd 0:2:0:0: Attached scsi generic sg1 type 0 [ 7.673251] sd 0:2:1:0: Attached scsi generic sg2 type 0 [ 7.673350] scsi 1:0:0:0: Attached scsi generic sg3 type 5 [ 7.673449] sd 1:0:0:1: Attached scsi generic sg4 type 0 [ 8.787874] loop: module loaded [ 8.812487] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.838128] Bridge firewalling registered [ 8.897779] device-mapper: uevent: version 1.0.3 [ 8.898133] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 14.735509] REISERFS (device sda3): found reiserfs format "3.6" with standard journal [ 14.735634] REISERFS (device sda3): using ordered data mode [ 14.735866] REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 14.736395] REISERFS (device sda3): checking transaction log (sda3) [ 14.737438] REISERFS (device sda3): Using r5 hash to sort names [ 15.228340] NET: Registered protocol family 10 [ 15.229749] lo: Disabled Privacy Extensions [ 15.272519] device eth0 entered promiscuous mode [ 15.273962] bnx2 0000:01:00.0: irq 63 for MSI/MSI-X [ 15.273966] bnx2 0000:01:00.0: irq 64 for MSI/MSI-X [ 15.273970] bnx2 0000:01:00.0: irq 65 for MSI/MSI-X [ 15.273974] bnx2 0000:01:00.0: irq 66 for MSI/MSI-X [ 15.273977] bnx2 0000:01:00.0: irq 67 for MSI/MSI-X [ 15.273980] bnx2 0000:01:00.0: irq 68 for MSI/MSI-X [ 15.273983] bnx2 0000:01:00.0: irq 69 for MSI/MSI-X [ 15.273986] bnx2 0000:01:00.0: irq 70 for MSI/MSI-X [ 15.273989] bnx2 0000:01:00.0: irq 71 for MSI/MSI-X [ 15.317946] bnx2: eth0: using MSIX [ 15.319779] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.485066] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex