From: Wei Yongjun <yjwei@cn.fujitsu.com>
To: Avi Kivity <avi@redhat.com>, Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org
Subject: [PATCHv2] KVM: x86 emulator: fix pusha instruction emulation
Date: Tue, 15 Jun 2010 09:03:33 +0800 [thread overview]
Message-ID: <4C16D165.8020406@cn.fujitsu.com> (raw)
In-Reply-To: <4C16D0A0.2090203@cn.fujitsu.com>
emulate pusha instruction only writeback the last
EDI register, but the other registers which need
to be writeback is ignored. This patch fixed it.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
---
v1 -> v2 add missing signed off by
---
arch/x86/kvm/emulate.c | 133 ++++++++++++++++++++++++++----------------------
1 files changed, 73 insertions(+), 60 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index a4c2dcd..c990db0 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -1553,6 +1553,64 @@ exception:
return X86EMUL_PROPAGATE_FAULT;
}
+static inline int writeback(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops)
+{
+ int rc;
+ struct decode_cache *c = &ctxt->decode;
+ u32 err;
+
+ switch (c->dst.type) {
+ case OP_REG:
+ /* The 4-byte case *is* correct:
+ * in 64-bit mode we zero-extend.
+ */
+ switch (c->dst.bytes) {
+ case 1:
+ *(u8 *)c->dst.ptr = (u8)c->dst.val;
+ break;
+ case 2:
+ *(u16 *)c->dst.ptr = (u16)c->dst.val;
+ break;
+ case 4:
+ *c->dst.ptr = (u32)c->dst.val;
+ break; /* 64b: zero-ext */
+ case 8:
+ *c->dst.ptr = c->dst.val;
+ break;
+ }
+ break;
+ case OP_MEM:
+ if (c->lock_prefix)
+ rc = ops->cmpxchg_emulated(
+ (unsigned long)c->dst.ptr,
+ &c->dst.orig_val,
+ &c->dst.val,
+ c->dst.bytes,
+ &err,
+ ctxt->vcpu);
+ else
+ rc = ops->write_emulated(
+ (unsigned long)c->dst.ptr,
+ &c->dst.val,
+ c->dst.bytes,
+ &err,
+ ctxt->vcpu);
+ if (rc == X86EMUL_PROPAGATE_FAULT)
+ emulate_pf(ctxt,
+ (unsigned long)c->dst.ptr, err);
+ if (rc != X86EMUL_CONTINUE)
+ return rc;
+ break;
+ case OP_NONE:
+ /* no writeback */
+ break;
+ default:
+ break;
+ }
+ return X86EMUL_CONTINUE;
+}
+
static inline void emulate_push(struct x86_emulate_ctxt *ctxt,
struct x86_emulate_ops *ops)
{
@@ -1651,11 +1709,12 @@ static int emulate_pop_sreg(struct x86_emulate_ctxt *ctxt,
return rc;
}
-static void emulate_pusha(struct x86_emulate_ctxt *ctxt,
+static int emulate_pusha(struct x86_emulate_ctxt *ctxt,
struct x86_emulate_ops *ops)
{
struct decode_cache *c = &ctxt->decode;
unsigned long old_esp = c->regs[VCPU_REGS_RSP];
+ int rc = X86EMUL_CONTINUE;
int reg = VCPU_REGS_RAX;
while (reg <= VCPU_REGS_RDI) {
@@ -1663,8 +1722,18 @@ static void emulate_pusha(struct x86_emulate_ctxt *ctxt,
(c->src.val = old_esp) : (c->src.val = c->regs[reg]);
emulate_push(ctxt, ops);
+
+ rc = writeback(ctxt, ops);
+ if (rc != X86EMUL_CONTINUE)
+ return rc;
+
++reg;
}
+
+ /* Disable writeback. */
+ c->dst.type = OP_NONE;
+
+ return rc;
}
static int emulate_popa(struct x86_emulate_ctxt *ctxt,
@@ -1817,64 +1886,6 @@ static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
return rc;
}
-static inline int writeback(struct x86_emulate_ctxt *ctxt,
- struct x86_emulate_ops *ops)
-{
- int rc;
- struct decode_cache *c = &ctxt->decode;
- u32 err;
-
- switch (c->dst.type) {
- case OP_REG:
- /* The 4-byte case *is* correct:
- * in 64-bit mode we zero-extend.
- */
- switch (c->dst.bytes) {
- case 1:
- *(u8 *)c->dst.ptr = (u8)c->dst.val;
- break;
- case 2:
- *(u16 *)c->dst.ptr = (u16)c->dst.val;
- break;
- case 4:
- *c->dst.ptr = (u32)c->dst.val;
- break; /* 64b: zero-ext */
- case 8:
- *c->dst.ptr = c->dst.val;
- break;
- }
- break;
- case OP_MEM:
- if (c->lock_prefix)
- rc = ops->cmpxchg_emulated(
- (unsigned long)c->dst.ptr,
- &c->dst.orig_val,
- &c->dst.val,
- c->dst.bytes,
- &err,
- ctxt->vcpu);
- else
- rc = ops->write_emulated(
- (unsigned long)c->dst.ptr,
- &c->dst.val,
- c->dst.bytes,
- &err,
- ctxt->vcpu);
- if (rc == X86EMUL_PROPAGATE_FAULT)
- emulate_pf(ctxt,
- (unsigned long)c->dst.ptr, err);
- if (rc != X86EMUL_CONTINUE)
- return rc;
- break;
- case OP_NONE:
- /* no writeback */
- break;
- default:
- break;
- }
- return X86EMUL_CONTINUE;
-}
-
static inline void
setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
struct x86_emulate_ops *ops, struct desc_struct *cs,
@@ -2689,7 +2700,9 @@ special_insn:
goto done;
break;
case 0x60: /* pusha */
- emulate_pusha(ctxt, ops);
+ rc = emulate_pusha(ctxt, ops);
+ if (rc != X86EMUL_CONTINUE)
+ goto done;
break;
case 0x61: /* popa */
rc = emulate_popa(ctxt, ops);
--
1.7.0.4
next prev parent reply other threads:[~2010-06-15 1:05 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-15 1:00 [PATCH] KVM: x86 emulator: fix pusha instruction emulation Wei Yongjun
2010-06-15 1:03 ` Wei Yongjun [this message]
2010-06-15 2:10 ` [PATCH] test: add test for pusha and popa instructions Wei Yongjun
2010-06-20 8:29 ` Avi Kivity
2010-06-21 2:48 ` Wei Yongjun
2010-06-21 13:15 ` Avi Kivity
2010-06-15 11:00 ` [PATCHv2] KVM: x86 emulator: fix pusha instruction emulation Avi Kivity
2010-06-16 14:09 ` [PATCH] " Marcelo Tosatti
2010-06-17 9:33 ` [PATCH] KVM: x86 emulator: fix group3 instruction decoding Wei Yongjun
2010-06-17 12:00 ` Avi Kivity
2010-06-18 0:51 ` Wei Yongjun
2010-06-20 8:24 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C16D165.8020406@cn.fujitsu.com \
--to=yjwei@cn.fujitsu.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox