From: Avi Kivity <avi@redhat.com>
To: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Subject: Re: [RFC][PATCH 9/9] make kvm mmu shrinker more aggressive
Date: Wed, 16 Jun 2010 12:24:00 +0300 [thread overview]
Message-ID: <4C189830.2070300@redhat.com> (raw)
In-Reply-To: <20100615135530.4565745D@kernel.beaverton.ibm.com>
On 06/15/2010 04:55 PM, Dave Hansen wrote:
> In a previous patch, we removed the 'nr_to_scan' tracking.
> It was not being used to track the number of objects
> scanned, so we stopped using it entirely. Here, we
> strart using it again.
>
> The theory here is simple; if we already have the refcount
> and the kvm->mmu_lock, then we should do as much work as
> possible under the lock. The downside is that we're less
> fair about the KVM instances from which we reclaim. Each
> call to mmu_shrink() will tend to "pick on" one instance,
> after which it gets moved to the end of the list and left
> alone for a while.
>
That also increases the latency hit, as well as a potential fault storm,
on that instance. Spreading out is less efficient, but smoother.
> If mmu_shrink() has already done a significant amount of
> scanning, the use of 'nr_to_scan' inside shrink_kvm_mmu()
> will also ensure that we do not over-reclaim when we have
> already done a lot of work in this call.
>
> In the end, this patch defines a "scan" as:
> 1. An attempt to acquire a refcount on a 'struct kvm'
> 2. freeing a kvm mmu page
>
> This would probably be most ideal if we can expose some
> of the work done by kvm_mmu_remove_some_alloc_mmu_pages()
> as also counting as scanning, but I think we have churned
> enough for the moment.
>
It usually removes one page.
> Signed-off-by: Dave Hansen<dave@linux.vnet.ibm.com>
> ---
>
> linux-2.6.git-dave/arch/x86/kvm/mmu.c | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff -puN arch/x86/kvm/mmu.c~make-shrinker-more-aggressive arch/x86/kvm/mmu.c
> --- linux-2.6.git/arch/x86/kvm/mmu.c~make-shrinker-more-aggressive 2010-06-14 11:30:44.000000000 -0700
> +++ linux-2.6.git-dave/arch/x86/kvm/mmu.c 2010-06-14 11:38:04.000000000 -0700
> @@ -2935,8 +2935,10 @@ static int shrink_kvm_mmu(struct kvm *kv
>
> idx = srcu_read_lock(&kvm->srcu);
> spin_lock(&kvm->mmu_lock);
> - if (kvm->arch.n_used_mmu_pages> 0)
> - freed_pages = kvm_mmu_remove_some_alloc_mmu_pages(kvm);
> + while (nr_to_scan> 0&& kvm->arch.n_used_mmu_pages> 0) {
> + freed_pages += kvm_mmu_remove_some_alloc_mmu_pages(kvm);
> + nr_to_scan--;
> + }
>
What tree are you patching?
--
error compiling committee.c: too many arguments to function
next prev parent reply other threads:[~2010-06-16 9:24 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-15 13:55 [RFC][PATCH 0/9] rework KVM mmu_shrink() code Dave Hansen
2010-06-15 13:55 ` [RFC][PATCH 1/9] abstract kvm x86 mmu->n_free_mmu_pages Dave Hansen
2010-06-16 8:40 ` Avi Kivity
2010-06-15 13:55 ` [RFC][PATCH 2/9] rename x86 kvm->arch.n_alloc_mmu_pages Dave Hansen
2010-06-15 13:55 ` [RFC][PATCH 3/9] replace x86 kvm n_free_mmu_pages with n_used_mmu_pages Dave Hansen
2010-06-16 14:25 ` Marcelo Tosatti
2010-06-16 15:42 ` Dave Hansen
2010-06-15 13:55 ` [RFC][PATCH 4/9] create aggregate kvm_total_used_mmu_pages value Dave Hansen
2010-06-16 8:48 ` Avi Kivity
2010-06-16 15:06 ` Dave Hansen
2010-06-17 8:43 ` Avi Kivity
2010-06-16 16:55 ` Dave Hansen
2010-06-17 8:23 ` Avi Kivity
2010-06-15 13:55 ` [RFC][PATCH 5/9] break out some mmu_skrink() code Dave Hansen
2010-06-15 13:55 ` [RFC][PATCH 6/9] remove kvm_freed variable Dave Hansen
2010-06-15 13:55 ` [RFC][PATCH 7/9] make kvm_get_kvm() more robust Dave Hansen
2010-06-15 13:55 ` [RFC][PATCH 8/9] reduce kvm_lock hold times in mmu_skrink() Dave Hansen
2010-06-16 8:54 ` Avi Kivity
2010-06-15 13:55 ` [RFC][PATCH 9/9] make kvm mmu shrinker more aggressive Dave Hansen
2010-06-16 9:24 ` Avi Kivity [this message]
2010-06-16 15:25 ` Dave Hansen
2010-06-17 8:37 ` Avi Kivity
2010-06-18 15:49 ` Dave Hansen
2010-06-20 8:11 ` Avi Kivity
2010-06-22 16:32 ` Dave Hansen
2010-07-22 4:36 ` Avi Kivity
2010-07-22 5:36 ` Dave Hansen
2010-07-22 5:42 ` Avi Kivity
2010-06-16 8:38 ` [RFC][PATCH 0/9] rework KVM mmu_shrink() code Avi Kivity
2010-06-16 15:03 ` Dave Hansen
2010-06-17 8:40 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C189830.2070300@redhat.com \
--to=avi@redhat.com \
--cc=dave@linux.vnet.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox