kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wei Yongjun <yjwei@cn.fujitsu.com>
To: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>, kvm@vger.kernel.org
Subject: [PATCH] KVM: x86 emulator: re-implementing 'mov AL,moffs' instruction decoding
Date: Wed, 07 Jul 2010 14:26:15 +0800	[thread overview]
Message-ID: <4C341E07.1000004@cn.fujitsu.com> (raw)
In-Reply-To: <4C331A13.4020202@redhat.com>

This patch change to use DstAcc for decoding 'mov AL, moffs'
and introduced SrcAcc for decoding 'mov moffs, AL'.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
---
 arch/x86/kvm/emulate.c |   30 +++++++++++++++++++++++-------
 1 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 99fa1c7..87289c2 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -70,6 +70,7 @@
 #define SrcSI       (0xa<<4)	/* Source is in the DS:RSI */
 #define SrcImmFAddr (0xb<<4)	/* Source is immediate far address */
 #define SrcMemFAddr (0xc<<4)	/* Source is far address in memory */
+#define SrcAcc      (0xd<<4)	/* Source Accumulator */
 #define SrcMask     (0xf<<4)
 /* Generic ModRM decode. */
 #define ModRM       (1<<8)
@@ -177,8 +178,8 @@ static u32 opcode_table[256] = {
 	0, 0, SrcImmFAddr | No64, 0,
 	ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
 	/* 0xA0 - 0xA7 */
-	ByteOp | SrcMem | Mov | MemAbs, SrcMem | Mov | MemAbs,
-	ByteOp | DstMem | Mov | MemAbs, DstMem | Mov | MemAbs,
+	ByteOp | DstAcc | SrcMem | Mov | MemAbs, DstAcc | SrcMem | Mov | MemAbs,
+	ByteOp | DstMem | SrcAcc | Mov | MemAbs, DstMem | SrcAcc | Mov | MemAbs,
 	ByteOp | SrcSI | DstDI | Mov | String, SrcSI | DstDI | Mov | String,
 	ByteOp | SrcSI | DstDI | String, SrcSI | DstDI | String,
 	/* 0xA8 - 0xAF */
@@ -1186,6 +1187,25 @@ done_prefixes:
 		else
 			c->src.val = insn_fetch(u8, 1, c->eip);
 		break;
+	case SrcAcc:
+		c->src.type = OP_REG;
+		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->src.ptr = &c->regs[VCPU_REGS_RAX];
+		switch (c->src.bytes) {
+			case 1:
+				c->src.val = *(u8 *)c->src.ptr;
+				break;
+			case 2:
+				c->src.val = *(u16 *)c->src.ptr;
+				break;
+			case 4:
+				c->src.val = *(u32 *)c->src.ptr;
+				break;
+			case 8:
+				c->src.val = *(u64 *)c->src.ptr;
+				break;
+		}
+		break;
 	case SrcOne:
 		c->src.bytes = 1;
 		c->src.val = 1;
@@ -2854,13 +2874,9 @@ special_insn:
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
 		break;
-	case 0xa0 ... 0xa1:	/* mov */
-		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
+	case 0xa0 ... 0xa3:	/* mov */
 		c->dst.val = c->src.val;
 		break;
-	case 0xa2 ... 0xa3:	/* mov */
-		c->dst.val = (unsigned long)c->regs[VCPU_REGS_RAX];
-		break;
 	case 0xa4 ... 0xa5:	/* movs */
 		goto mov;
 	case 0xa6 ... 0xa7:	/* cmps */
-- 
1.7.0.4



  parent reply	other threads:[~2010-07-07  6:28 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-06  8:49 [PATCH 1/6] KVM: x86 emulator: fix 'mov sreg,rm16' instruction decoding Wei Yongjun
2010-07-06  8:50 ` [PATCH 2/6] KVM: x86 emulator: fix the comment of out instruction Wei Yongjun
2010-07-06  8:51 ` [PATCH 3/6] KVM: x86 emulator: fix 'and AL,imm8' instruction decoding Wei Yongjun
2010-07-06  8:52 ` [PATCH 4/6] KVM: x86 emulator: fix 'mov rm,sreg' " Wei Yongjun
2010-07-06  8:53 ` [PATCH 5/6] KVM: x86 emulator: fix 'mov AL,moffs' " Wei Yongjun
2010-07-06 11:57   ` Avi Kivity
2010-07-07  6:25     ` Wei Yongjun
2010-07-07  6:26     ` Wei Yongjun [this message]
2010-07-07  9:33       ` [PATCH] KVM: x86 emulator: re-implementing " Mohammed Gamal
2010-07-07  9:36         ` Wei Yongjun
2010-07-07  9:43       ` [PATCHv2] " Wei Yongjun
2010-07-07  9:50         ` Avi Kivity
2010-07-06  8:54 ` [PATCH 6/6] KVM: x86 emulator: fix cli/sti instruction emulation Wei Yongjun
2010-07-06  9:22 ` [PATCH 1/6] KVM: x86 emulator: fix 'mov sreg,rm16' instruction decoding Avi Kivity

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C341E07.1000004@cn.fujitsu.com \
    --to=yjwei@cn.fujitsu.com \
    --cc=avi@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=mtosatti@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).