From: Avi Kivity <avi@redhat.com>
To: "Nadav Har'El" <nyh@il.ibm.com>
Cc: kvm@vger.kernel.org, gleb@redhat.com
Subject: Re: [PATCH 10/27] nVMX: Implement VMCLEAR
Date: Sun, 17 Oct 2010 15:05:54 +0200 [thread overview]
Message-ID: <4CBAF4B2.5000505@redhat.com> (raw)
In-Reply-To: <201010171008.o9HA8g4E029408@rice.haifa.ibm.com>
On 10/17/2010 12:08 PM, Nadav Har'El wrote:
> This patch implements the VMCLEAR instruction.
>
> Signed-off-by: Nadav Har'El<nyh@il.ibm.com>
> ---
> arch/x86/kvm/vmx.c | 62 ++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 61 insertions(+), 1 deletion(-)
>
> --- .before/arch/x86/kvm/vmx.c 2010-10-17 11:52:01.000000000 +0200
> +++ .after/arch/x86/kvm/vmx.c 2010-10-17 11:52:01.000000000 +0200
> @@ -146,6 +146,8 @@ struct __packed vmcs12 {
> */
> u32 revision_id;
> u32 abort;
> +
> + bool launch_state; /* set to 0 by VMCLEAR, to 1 by VMLAUNCH */
u32 please, this is an ABI.
> };
>
> /*
> @@ -3830,6 +3832,64 @@ static void nested_vmx_failValid(struct
> get_vmcs12_fields(vcpu)->vm_instruction_error = vm_instruction_error;
> }
>
> +/* Emulate the VMCLEAR instruction */
> +static int handle_vmclear(struct kvm_vcpu *vcpu)
> +{
> + struct vcpu_vmx *vmx = to_vmx(vcpu);
> + gva_t gva;
> + gpa_t vmcs12_addr;
> + struct vmcs12 *vmcs12;
> + struct page *page;
> +
> + if (!nested_vmx_check_permission(vcpu))
> + return 1;
> +
> + if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION),
> + vmcs_read32(VMX_INSTRUCTION_INFO),&gva))
> + return 1;
> +
> + if (kvm_read_guest_virt(gva,&vmcs12_addr, sizeof(vmcs12_addr),
> + vcpu, NULL)) {
> + kvm_queue_exception(vcpu, PF_VECTOR);
> + return 1;
> + }
> +
> + if (!IS_ALIGNED(vmcs12_addr, PAGE_SIZE)) {
> + nested_vmx_failValid(vcpu, VMXERR_VMCLEAR_INVALID_ADDRESS);
> + skip_emulated_instruction(vcpu);
> + return 1;
> + }
> +
> + if (vmcs12_addr == vmx->nested.current_vmptr){
> + kunmap(vmx->nested.current_vmcs12_page);
> + nested_release_page(vmx->nested.current_vmcs12_page);
> + vmx->nested.current_vmptr = -1ull;
> + }
> +
> + page = nested_get_page(vcpu, vmcs12_addr);
> + if(page == NULL){
Missing whitespace.
> + /*
> + * For accurate processor emulation, VMCLEAR beyond available
> + * physical memory should do nothing at all. However, it is
> + * possible that a nested vmx bug, not a guest hypervisor bug,
> + * resulted in this case, so let's shut down before doing any
> + * more damage:
> + */
> + set_bit(KVM_REQ_TRIPLE_FAULT,&vcpu->requests);
> + return 1;
> + }
> + vmcs12 = kmap(page);
kmap_atomic() please (better, kvm_write_guest(), but can defer that for
later)
> + vmcs12->launch_state = 0;
> + kunmap(page);
> + nested_release_page(page);
> +
> + nested_free_vmcs(vcpu, vmcs12_addr);
> +
> + skip_emulated_instruction(vcpu);
> + nested_vmx_succeed(vcpu);
> + return 1;
> +}
> +
> static int handle_invlpg(struct kvm_vcpu *vcpu)
> {
> unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
--
error compiling committee.c: too many arguments to function
next prev parent reply other threads:[~2010-10-17 13:06 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-17 10:03 [PATCH 0/27] nVMX: Nested VMX, v6 Nadav Har'El
2010-10-17 10:04 ` [PATCH 01/27] nVMX: Add "nested" module option to vmx.c Nadav Har'El
2010-10-17 10:04 ` [PATCH 02/27] nVMX: Add VMX and SVM to list of supported cpuid features Nadav Har'El
2010-10-17 10:05 ` [PATCH 03/27] nVMX: Implement VMXON and VMXOFF Nadav Har'El
2010-10-17 12:24 ` Avi Kivity
2010-10-17 12:47 ` Nadav Har'El
2010-10-17 13:07 ` Avi Kivity
2010-10-17 10:05 ` [PATCH 04/27] nVMX: Allow setting the VMXE bit in CR4 Nadav Har'El
2010-10-17 12:31 ` Avi Kivity
2010-10-17 10:06 ` [PATCH 05/27] nVMX: Introduce vmcs12: a VMCS structure for L1 Nadav Har'El
2010-10-17 12:34 ` Avi Kivity
2010-10-17 13:18 ` Nadav Har'El
2010-10-17 13:29 ` Avi Kivity
2010-10-17 10:06 ` [PATCH 06/27] nVMX: Implement reading and writing of VMX MSRs Nadav Har'El
2010-10-17 12:52 ` Avi Kivity
2010-10-17 10:07 ` [PATCH 07/27] nVMX: Decoding memory operands of VMX instructions Nadav Har'El
2010-10-17 10:07 ` [PATCH 08/27] nVMX: Hold a vmcs02 for each vmcs12 Nadav Har'El
2010-10-17 13:00 ` Avi Kivity
2010-10-17 10:08 ` [PATCH 09/27] nVMX: Success/failure of VMX instructions Nadav Har'El
2010-10-17 10:08 ` [PATCH 10/27] nVMX: Implement VMCLEAR Nadav Har'El
2010-10-17 13:05 ` Avi Kivity [this message]
2010-10-17 13:25 ` Nadav Har'El
2010-10-17 13:27 ` Avi Kivity
2010-10-17 13:37 ` Nadav Har'El
2010-10-17 14:12 ` Avi Kivity
2010-10-17 14:14 ` Gleb Natapov
2010-10-17 10:09 ` [PATCH 11/27] nVMX: Implement VMPTRLD Nadav Har'El
2010-10-17 10:09 ` [PATCH 12/27] nVMX: Implement VMPTRST Nadav Har'El
2010-10-17 10:10 ` [PATCH 13/27] nVMX: Add VMCS fields to the vmcs12 Nadav Har'El
2010-10-17 13:15 ` Avi Kivity
2010-10-17 10:10 ` [PATCH 14/27] nVMX: Implement VMREAD and VMWRITE Nadav Har'El
2010-10-17 13:25 ` Avi Kivity
2010-10-17 10:11 ` [PATCH 15/27] nVMX: Prepare vmcs02 from vmcs01 and vmcs12 Nadav Har'El
2010-10-17 14:08 ` Avi Kivity
2011-02-08 12:13 ` Nadav Har'El
2011-02-08 12:27 ` Avi Kivity
2011-02-08 12:36 ` Nadav Har'El
2011-02-08 12:39 ` Avi Kivity
2011-02-08 12:27 ` Avi Kivity
2010-10-17 10:11 ` [PATCH 16/27] nVMX: Move register-syncing to a function Nadav Har'El
2010-10-17 10:12 ` [PATCH 17/27] nVMX: Implement VMLAUNCH and VMRESUME Nadav Har'El
2010-10-17 15:06 ` Avi Kivity
2010-10-17 10:12 ` [PATCH 18/27] nVMX: No need for handle_vmx_insn function any more Nadav Har'El
2010-10-17 10:13 ` [PATCH 19/27] nVMX: Exiting from L2 to L1 Nadav Har'El
2010-10-17 15:58 ` Avi Kivity
2010-10-17 10:13 ` [PATCH 20/27] nVMX: Deciding if L0 or L1 should handle an L2 exit Nadav Har'El
2010-10-20 12:13 ` Avi Kivity
2010-10-20 14:57 ` Avi Kivity
2010-10-17 10:14 ` [PATCH 21/27] nVMX: Correct handling of interrupt injection Nadav Har'El
2010-10-17 10:14 ` [PATCH 22/27] nVMX: Correct handling of exception injection Nadav Har'El
2010-10-17 10:15 ` [PATCH 23/27] nVMX: Correct handling of idt vectoring info Nadav Har'El
2010-10-17 10:15 ` [PATCH 24/27] nVMX: Handling of CR0.TS and #NM for Lazy FPU loading Nadav Har'El
2010-10-17 10:16 ` [PATCH 25/27] nVMX: Additional TSC-offset handling Nadav Har'El
2010-10-19 19:13 ` Zachary Amsden
2010-10-17 10:16 ` [PATCH 26/27] nVMX: Miscellenous small corrections Nadav Har'El
2010-10-17 10:17 ` [PATCH 27/27] nVMX: Documentation Nadav Har'El
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CBAF4B2.5000505@redhat.com \
--to=avi@redhat.com \
--cc=gleb@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=nyh@il.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).