public inbox for kvm@vger.kernel.org
 help / color / mirror / Atom feed
From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Glauber Costa <glommer@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>,
	kvm@vger.kernel.org, Zachary Amsden <zamsden@redhat.com>,
	linux-kernel@vger.kernel.org,
	"Xen-devel@lists.xensource.com" <Xen-devel@lists.xensource.com>,
	avi@redhat.com
Subject: Re: [PATCH 1/5] Add a global synchronization point for pvclock
Date: Mon, 25 Oct 2010 16:30:19 -0700	[thread overview]
Message-ID: <4CC6130B.8020908@goop.org> (raw)
In-Reply-To: <1271356648-5108-2-git-send-email-glommer@redhat.com>

 On 04/15/2010 11:37 AM, Glauber Costa wrote:
> In recent stress tests, it was found that pvclock-based systems
> could seriously warp in smp systems. Using ingo's time-warp-test.c,
> I could trigger a scenario as bad as 1.5mi warps a minute in some systems.
> (to be fair, it wasn't that bad in most of them). Investigating further, I
> found out that such warps were caused by the very offset-based calculation
> pvclock is based on.
>
> This happens even on some machines that report constant_tsc in its tsc flags,
> specially on multi-socket ones.
>
> Two reads of the same kernel timestamp at approx the same time, will likely
> have tsc timestamped in different occasions too. This means the delta we
> calculate is unpredictable at best, and can probably be smaller in a cpu
> that is legitimately reading clock in a forward ocasion.
>
> Some adjustments on the host could make this window less likely to happen,
> but still, it pretty much poses as an intrinsic problem of the mechanism.
>
> A while ago, I though about using a shared variable anyway, to hold clock
> last state, but gave up due to the high contention locking was likely
> to introduce, possibly rendering the thing useless on big machines. I argue,
> however, that locking is not necessary.
>
> We do a read-and-return sequence in pvclock, and between read and return,
> the global value can have changed. However, it can only have changed
> by means of an addition of a positive value. So if we detected that our
> clock timestamp is less than the current global, we know that we need to
> return a higher one, even though it is not exactly the one we compared to.
>
> OTOH, if we detect we're greater than the current time source, we atomically
> replace the value with our new readings. This do causes contention on big
> boxes (but big here means *BIG*), but it seems like a good trade off, since
> it provide us with a time source guaranteed to be stable wrt time warps.
>
> After this patch is applied, I don't see a single warp in time during 5 days
> of execution, in any of the machines I saw them before.

Unfortunately this is breaking Xen save/restore: if you restore on a
host which was booted more recently than the save host, causing the
system time to be smaller.  The effect is that the domain's time leaps
forward to a fixed point, and stays there until the host catches up to
the source host...

I guess last_time needs to be reset on this type of event.  I guess the
cleanest way would be for pvclock.c to register a sysdev suspend/resume
handler.

    J

> Signed-off-by: Glauber Costa <glommer@redhat.com>
> CC: Jeremy Fitzhardinge <jeremy@goop.org>
> CC: Avi Kivity <avi@redhat.com>
> CC: Marcelo Tosatti <mtosatti@redhat.com>
> CC: Zachary Amsden <zamsden@redhat.com>
> ---
>  arch/x86/kernel/pvclock.c |   23 +++++++++++++++++++++++
>  1 files changed, 23 insertions(+), 0 deletions(-)
>
> diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
> index 03801f2..b7de0e6 100644
> --- a/arch/x86/kernel/pvclock.c
> +++ b/arch/x86/kernel/pvclock.c
> @@ -109,11 +109,14 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src)
>  	return pv_tsc_khz;
>  }
>  
> +static u64 last_value = 0;
> +
>  cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
>  {
>  	struct pvclock_shadow_time shadow;
>  	unsigned version;
>  	cycle_t ret, offset;
> +	u64 last;
>  
>  	do {
>  		version = pvclock_get_time_values(&shadow, src);
> @@ -123,6 +126,26 @@ cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
>  		barrier();
>  	} while (version != src->version);
>  
> +	/*
> +	 * Assumption here is that last_value, a global accumulator, always goes
> +	 * forward. If we are less than that, we should not be much smaller.
> +	 * We assume there is an error marging we're inside, and then the correction
> +	 * does not sacrifice accuracy.
> +	 *
> +	 * For reads: global may have changed between test and return,
> +	 * but this means someone else updated poked the clock at a later time.
> +	 * We just need to make sure we are not seeing a backwards event.
> +	 *
> +	 * For updates: last_value = ret is not enough, since two vcpus could be
> +	 * updating at the same time, and one of them could be slightly behind,
> +	 * making the assumption that last_value always go forward fail to hold.
> +	 */
> +	do {
> +		last = last_value;
> +		if (ret < last)
> +			return last;
> +	} while (unlikely(cmpxchg64(&last_value, last, ret) != ret));
> +
>  	return ret;
>  }
>  

  parent reply	other threads:[~2010-10-25 23:30 UTC|newest]

Thread overview: 75+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-15 18:37 [PATCH 0/5] pv clock misc fixes Glauber Costa
2010-04-15 18:37 ` [PATCH 1/5] Add a global synchronization point for pvclock Glauber Costa
2010-04-15 18:37   ` [PATCH 2/5] change msr numbers for kvmclock Glauber Costa
2010-04-15 18:37     ` [PATCH 3/5] Try using new kvm clock msrs Glauber Costa
2010-04-15 18:37       ` [PATCH 4/5] export new cpuid KVM_CAP Glauber Costa
2010-04-15 18:37         ` [PATCH 5/5] add documentation about kvmclock Glauber Costa
2010-04-15 19:28           ` Randy Dunlap
2010-04-15 20:10             ` Glauber Costa
2010-04-17 18:58         ` [PATCH 4/5] export new cpuid KVM_CAP Avi Kivity
2010-04-19 14:50           ` Glauber Costa
2010-04-20  9:29             ` Avi Kivity
2010-04-17 18:55       ` [PATCH 3/5] Try using new kvm clock msrs Avi Kivity
2010-04-17 18:51     ` [PATCH 2/5] change msr numbers for kvmclock Avi Kivity
2010-04-16 20:23   ` [PATCH 1/5] Add a global synchronization point for pvclock Marcelo Tosatti
2010-04-16 20:36   ` Jeremy Fitzhardinge
2010-04-16 21:05     ` Zachary Amsden
2010-04-19 10:39     ` Peter Zijlstra
2010-04-19 10:50       ` Avi Kivity
2010-04-19 11:05         ` Peter Zijlstra
2010-04-19 11:10           ` Avi Kivity
2010-04-19 14:21             ` Glauber Costa
2010-04-19 14:33               ` Avi Kivity
2010-04-19 14:46                 ` Peter Zijlstra
2010-04-19 16:18                   ` Jeremy Fitzhardinge
2010-04-20  9:31                     ` Avi Kivity
2010-04-20 18:23                       ` Jeremy Fitzhardinge
2010-04-20 18:54                         ` Avi Kivity
2010-04-20 19:42                           ` Jeremy Fitzhardinge
2010-04-21  0:07                             ` Zachary Amsden
2010-04-22 13:11                             ` Glauber Costa
2010-04-23  1:44                               ` Zachary Amsden
2010-04-23  9:34                                 ` Avi Kivity
2010-04-23 19:22                                   ` Jeremy Fitzhardinge
2010-04-23 19:25                                     ` Avi Kivity
2010-04-23 21:31                                   ` Zachary Amsden
2010-04-23 21:35                                     ` Jeremy Fitzhardinge
2010-04-23 21:41                                       ` Zachary Amsden
2010-04-24  9:30                                         ` Avi Kivity
2010-04-24  9:29                                     ` Avi Kivity
2010-04-19 16:11                 ` Jeremy Fitzhardinge
2010-04-19 14:26     ` Glauber Costa
2010-04-19 16:19       ` Jeremy Fitzhardinge
2010-04-19 18:25         ` Glauber Costa
2010-04-20  1:57           ` Marcelo Tosatti
2010-04-20  9:35             ` Avi Kivity
2010-04-20 12:59               ` Glauber Costa
2010-04-20 15:16                 ` Avi Kivity
2010-04-21  0:01               ` Zachary Amsden
2010-04-21  8:06                 ` Avi Kivity
2010-04-17 18:48   ` Avi Kivity
2010-04-17 18:49     ` Avi Kivity
2010-04-19 10:43       ` Peter Zijlstra
2010-04-19 10:47         ` Avi Kivity
2010-04-19 10:56           ` Peter Zijlstra
2010-04-19 11:13             ` Avi Kivity
2010-04-19 11:19               ` Peter Zijlstra
2010-04-19 11:40                 ` Avi Kivity
2010-04-19 14:32                 ` Glauber Costa
2010-04-19 14:37                   ` Avi Kivity
2010-04-19 10:46     ` Peter Zijlstra
2010-04-19 10:49       ` Avi Kivity
2010-04-19 10:51         ` Peter Zijlstra
2010-04-19 10:54           ` Avi Kivity
2010-04-19 18:35             ` Zachary Amsden
2010-04-20  9:39               ` Avi Kivity
2010-04-21  0:05                 ` Zachary Amsden
2010-04-21  8:08                   ` Avi Kivity
2010-04-19 10:49       ` Peter Zijlstra
2010-04-19 10:53         ` Avi Kivity
2010-04-19 10:59           ` Peter Zijlstra
2010-04-19 11:35             ` Avi Kivity
2010-10-25 23:30   ` Jeremy Fitzhardinge [this message]
2010-10-26  8:14     ` Avi Kivity
2010-10-26 10:49       ` Glauber Costa
2010-10-26 17:04       ` Jeremy Fitzhardinge

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4CC6130B.8020908@goop.org \
    --to=jeremy@goop.org \
    --cc=Xen-devel@lists.xensource.com \
    --cc=avi@redhat.com \
    --cc=glommer@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mtosatti@redhat.com \
    --cc=zamsden@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox