* kvm hangs with 1GB or more memory assigned
@ 2011-04-06 3:22 Neal Murphy
2011-04-06 7:35 ` Avi Kivity
0 siblings, 1 reply; 3+ messages in thread
From: Neal Murphy @ 2011-04-06 3:22 UTC (permalink / raw)
To: kvm
ENVIRONS:
I'm running
- Debian Squeeze.
- QEMU PC emulator version 0.12.5 (qemu-kvm-0.12.5)
- 2.6.32-5-686-bigmem #1 SMP Tue Mar 8 22:14:55 UTC 2011 i686 GNU/Linux
- Quad Phenom II 965, 8GB RAM
I'm booting generic 2.6.35.11 through syslinux. The command is generated via a
script I wrote. It works fine until I assign more than 1005M RAM to the VM;
it's been working fine (at less than 1GB RAM) for many months. The system I am
booting boots and runs fine on bare metal.
I got the same results when I DLed and installed ver. 0.14.
PROBLEM:
The command:
kvm -cpu phenom -smp 2 \
-drive if=ide,media=disk,serial=111111,file=/scratch/prtest.img,index=0 \
-drive if=ide,media=disk,serial=222222,file=/dev/sdd,index=1 \
-boot menu=on -m 1005M -vga std -serial stdio
produces the following output then keeps one physical CPU at 100% utilization.
With '-m 1004M', the VM boots OK; '-m 1005M' through '-m 1024M' fail as
follows:
----------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.11-roadster (root@gb68) (gcc version 4.4.3
(GCC) ) #1 SMP Tue Mar 29 01:21:10 BST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ecfd000 (usable)
[ 0.000000] BIOS-e820: 000000003ecfd000 - 000000003ed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x3ecfd max_arch_pfn = 0x1000000
[ 0.000000] found SMP MP-table at [c00f8880] f8880
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] RAMDISK: 3cff2000 - 3ecfc000
[ 0.000000] Allocated new RAMDISK: 01526000 - 0322fd9c
[ 0.000000] Move RAMDISK from 000000003cff2000 - 000000003ecfbd9b to
01526000 - 0322fd9b
[ 0.000000] ACPI: RSDP 000f8830 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 3ecfdd70 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC
00000001)
[ 0.000000] ACPI: FACP 3ecffe40 00074 (v01 BOCHS BXPCFACP 00000001 BXPC
00000001)
[ 0.000000] ACPI: DSDT 3ecfdf30 01EC4 (v01 BXPC BXDSDT 00000001 INTL
20100528)
[ 0.000000] ACPI: FACS 3ecffe00 00040
[ 0.000000] ACPI: SSDT 3ecfdee0 00044 (v01 BOCHS BXPCSSDT 00000001 BXPC
00000001)
[ 0.000000] ACPI: APIC 3ecfddf0 0007A (v01 BOCHS BXPCAPIC 00000001 BXPC
00000001)
[ 0.000000] ACPI: HPET 3ecfddb0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC
00000001)
[ 0.000000] 112MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] kvm-clock: Using msrs 12 and 11
[ 0.000000] kvm-clock: cpu 0, msr 0:13aac81, boot clock
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0003ecfd
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ecfd
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 23, address 0xfec00000, GSI 0-14
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 15
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 3ed00000 (gap:
3ed00000:c12bc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c3c00000 s33728 r0 d23616
u1048576
[ 0.000000] pcpu-alloc: s33728 r0 d23616 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] kvm-clock: cpu 0, msr 0:3c07c81, primary cpu clock
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 255169
[ 0.000000] Kernel command line: initrd=/iniramfs.igz r0 scroll
console=ttyS0,115200 BOOT_IMAGE=vmlinuz explore
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (43 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001517ca4] TEXT DATA BSS
[ 0.000000] #3 [0001518000 - 0001525049] BRK
[ 0.000000] #4 [000009f400 - 00000f8880] BIOS reserved
[ 0.000000] #5 [00000f8880 - 00000f8890] MP-table mpf
[ 0.000000] #6 [00000f8984 - 0000100000] BIOS reserved
[ 0.000000] #7 [00000f8890 - 00000f8984] MP-table mpc
[ 0.000000] #8 [0000002000 - 0000003000] TRAMPOLINE
[ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP
[ 0.000000] #10 [0000007000 - 0000008000] PGTABLE
[ 0.000000] #11 [0001526000 - 0003230000] NEW RAMDISK
[ 0.000000] #12 [0003230000 - 0003231000] BOOTMEM
[ 0.000000] #13 [0003231000 - 0003a11000] BOOTMEM
[ 0.000000] #14 [0001517cc0 - 0001517cc4] BOOTMEM
[ 0.000000] #15 [0001517d00 - 0001517dc0] BOOTMEM
[ 0.000000] #16 [0001517dc0 - 0001517e68] BOOTMEM
[ 0.000000] #17 [0003a11000 - 0003a14000] BOOTMEM
[ 0.000000] #18 [0001517e80 - 0001517e98] BOOTMEM
[ 0.000000] #19 [0001525080 - 0001525680] BOOTMEM
[ 0.000000] #20 [0001517ec0 - 0001517eed] BOOTMEM
[ 0.000000] #21 [0001517f00 - 0001517f2f] BOOTMEM
[ 0.000000] #22 [0001525680 - 000152577c] BOOTMEM
[ 0.000000] #23 [0001517f40 - 0001517f80] BOOTMEM
[ 0.000000] #24 [0001517f80 - 0001517fc0] BOOTMEM
[ 0.000000] #25 [0001517fc0 - 0001518000] BOOTMEM
[ 0.000000] #26 [0001525780 - 00015257c0] BOOTMEM
[ 0.000000] #27 [00015257c0 - 0001525800] BOOTMEM
[ 0.000000] #28 [0001525800 - 0001525840] BOOTMEM
[ 0.000000] #29 [0001525840 - 0001525850] BOOTMEM
[ 0.000000] #30 [0001525880 - 00015258cf] BOOTMEM
[ 0.000000] #31 [0001525900 - 000152594f] BOOTMEM
[ 0.000000] #32 [0003c00000 - 0003c0e000] BOOTMEM
[ 0.000000] #33 [0003d00000 - 0003d0e000] BOOTMEM
[ 0.000000] #34 [0001525980 - 0001525984] BOOTMEM
[ 0.000000] #35 [00015259c0 - 00015259c4] BOOTMEM
[ 0.000000] #36 [0001525a00 - 0001525a08] BOOTMEM
[ 0.000000] #37 [0001525a40 - 0001525a48] BOOTMEM
[ 0.000000] #38 [0001525a80 - 0001525b20] BOOTMEM
[ 0.000000] #39 [0001525b40 - 0001525b88] BOOTMEM
[ 0.000000] #40 [0003a14000 - 0003a18000] BOOTMEM
[ 0.000000] #41 [0003a18000 - 0003a98000] BOOTMEM
[ 0.000000] #42 [0003a98000 - 0003ad8000] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0003ecfd)
[ 0.000000] Memory: 984704k/1029108k available (2267k kernel code, 44012k
reserved, 1119k data, 372k init, 115708k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc134f000 - 0xc13ac000 ( 372 kB)
[ 0.000000] .data : 0xc1236d30 - 0xc134e948 (1119 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1236d30 (2267 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Detected 3415.784 MHz processor.
[ 0.040000] Calibrating delay loop (skipped) preset value.. 6831.56
BogoMIPS (lpj=34157840)
[ 0.040000] pid_max: default: 32768 minimum: 301
[ 0.040000] Security Framework initialized
[ 0.040000] SELinux: Disabled at boot.
[ 0.040000] Mount-cache hash table entries: 512
[ 0.040000] Initializing cgroup subsys ns
[ 0.040000] Initializing cgroup subsys cpuacct
[ 0.040000] Initializing cgroup subsys devices
[ 0.040000] mce: CPU supports 10 MCE banks
[ 0.040000] using C1E aware idle routine
[ 0.040000] Performance Events: AMD PMU driver.
[ 0.040000] ... version: 0
[ 0.040000] ... bit width: 48
[ 0.040000] ... generic registers: 4
[ 0.040000] ... value mask: 0000ffffffffffff
[ 0.040000] ... max period: 00007fffffffffff
[ 0.040000] ... fixed-purpose events: 0
[ 0.040000] ... event mask: 000000000000000f
[ 0.043049] ACPI: Core revision 20100428
[ 0.045055] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.045992] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046706] CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
----------
With '-m 1025M' and more, 'earlyprintk=serial,ttyS0,115200' is required to get
the following output from the kernel before it hangs:
----------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.11-roadster (root@gb68) (gcc version 4.4.3
(GCC) ) #1 SMP Tue Mar 29 01:21:10 BST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000400fd000 (usable)
[ 0.000000] BIOS-e820: 00000000400fd000 - 0000000040100000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
----------
Is this a qemu-kvm problem? A Kernel problem? Stupid user problem? Fencepost
error? Garbled Squebian install? Squebian-specific?
Thanks!
Neal
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: kvm hangs with 1GB or more memory assigned
2011-04-06 3:22 kvm hangs with 1GB or more memory assigned Neal Murphy
@ 2011-04-06 7:35 ` Avi Kivity
[not found] ` <201104150028.03397.neal.p.murphy@alum.wpi.edu>
0 siblings, 1 reply; 3+ messages in thread
From: Avi Kivity @ 2011-04-06 7:35 UTC (permalink / raw)
To: neal.p.murphy; +Cc: kvm
On 04/06/2011 06:22 AM, Neal Murphy wrote:
> ENVIRONS:
> I'm running
> - Debian Squeeze.
> - QEMU PC emulator version 0.12.5 (qemu-kvm-0.12.5)
> - 2.6.32-5-686-bigmem #1 SMP Tue Mar 8 22:14:55 UTC 2011 i686 GNU/Linux
> - Quad Phenom II 965, 8GB RAM
>
> I'm booting generic 2.6.35.11 through syslinux. The command is generated via a
> script I wrote. It works fine until I assign more than 1005M RAM to the VM;
> it's been working fine (at less than 1GB RAM) for many months. The system I am
> booting boots and runs fine on bare metal.
>
> I got the same results when I DLed and installed ver. 0.14.
>
> PROBLEM:
> The command:
> kvm -cpu phenom -smp 2 \
> -drive if=ide,media=disk,serial=111111,file=/scratch/prtest.img,index=0 \
> -drive if=ide,media=disk,serial=222222,file=/dev/sdd,index=1 \
> -boot menu=on -m 1005M -vga std -serial stdio
> produces the following output then keeps one physical CPU at 100% utilization.
> With '-m 1004M', the VM boots OK; '-m 1005M' through '-m 1024M' fail as
> follows:
> ----------
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.35.11-roadster (root@gb68) (gcc version 4.4.3
> (GCC) ) #1 SMP Tue Mar 29 01:21:10 BST 2011
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ecfd000 (usable)
> [ 0.000000] BIOS-e820: 000000003ecfd000 - 000000003ed00000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] last_pfn = 0x3ecfd max_arch_pfn = 0x1000000
> [ 0.000000] found SMP MP-table at [c00f8880] f8880
> [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
> [ 0.000000] RAMDISK: 3cff2000 - 3ecfc000
> [ 0.000000] Allocated new RAMDISK: 01526000 - 0322fd9c
> [ 0.000000] Move RAMDISK from 000000003cff2000 - 000000003ecfbd9b to
> 01526000 - 0322fd9b
> [ 0.000000] ACPI: RSDP 000f8830 00014 (v00 BOCHS )
> [ 0.000000] ACPI: RSDT 3ecfdd70 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC
> 00000001)
> [ 0.000000] ACPI: FACP 3ecffe40 00074 (v01 BOCHS BXPCFACP 00000001 BXPC
> 00000001)
> [ 0.000000] ACPI: DSDT 3ecfdf30 01EC4 (v01 BXPC BXDSDT 00000001 INTL
> 20100528)
> [ 0.000000] ACPI: FACS 3ecffe00 00040
> [ 0.000000] ACPI: SSDT 3ecfdee0 00044 (v01 BOCHS BXPCSSDT 00000001 BXPC
> 00000001)
> [ 0.000000] ACPI: APIC 3ecfddf0 0007A (v01 BOCHS BXPCAPIC 00000001 BXPC
> 00000001)
> [ 0.000000] ACPI: HPET 3ecfddb0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC
> 00000001)
> [ 0.000000] 112MB HIGHMEM available.
> [ 0.000000] 891MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 37bfe000
> [ 0.000000] low ram: 0 - 37bfe000
> [ 0.000000] kvm-clock: Using msrs 12 and 11
> [ 0.000000] kvm-clock: cpu 0, msr 0:13aac81, boot clock
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000001 -> 0x00001000
> [ 0.000000] Normal 0x00001000 -> 0x00037bfe
> [ 0.000000] HighMem 0x00037bfe -> 0x0003ecfd
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000001 -> 0x0000009f
> [ 0.000000] 0: 0x00000100 -> 0x0003ecfd
> [ 0.000000] Using APIC driver default
> [ 0.000000] ACPI: PM-Timer IO Port: 0xb008
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 23, address 0xfec00000, GSI 0-14
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 15
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 -
> 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000f0000
> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
> 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 3ed00000 (gap:
> 3ed00000:c12bc000)
> [ 0.000000] Booting paravirtualized kernel on KVM
> [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2
> nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3c00000 s33728 r0 d23616
> u1048576
> [ 0.000000] pcpu-alloc: s33728 r0 d23616 u1048576 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1
> [ 0.000000] kvm-clock: cpu 0, msr 0:3c07c81, primary cpu clock
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
> pages: 255169
> [ 0.000000] Kernel command line: initrd=/iniramfs.igz r0 scroll
> console=ttyS0,115200 BOOT_IMAGE=vmlinuz explore
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
> bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] Subtract (43 early reservations)
> [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
> [ 0.000000] #2 [0001000000 - 0001517ca4] TEXT DATA BSS
> [ 0.000000] #3 [0001518000 - 0001525049] BRK
> [ 0.000000] #4 [000009f400 - 00000f8880] BIOS reserved
> [ 0.000000] #5 [00000f8880 - 00000f8890] MP-table mpf
> [ 0.000000] #6 [00000f8984 - 0000100000] BIOS reserved
> [ 0.000000] #7 [00000f8890 - 00000f8984] MP-table mpc
> [ 0.000000] #8 [0000002000 - 0000003000] TRAMPOLINE
> [ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP
> [ 0.000000] #10 [0000007000 - 0000008000] PGTABLE
> [ 0.000000] #11 [0001526000 - 0003230000] NEW RAMDISK
> [ 0.000000] #12 [0003230000 - 0003231000] BOOTMEM
> [ 0.000000] #13 [0003231000 - 0003a11000] BOOTMEM
> [ 0.000000] #14 [0001517cc0 - 0001517cc4] BOOTMEM
> [ 0.000000] #15 [0001517d00 - 0001517dc0] BOOTMEM
> [ 0.000000] #16 [0001517dc0 - 0001517e68] BOOTMEM
> [ 0.000000] #17 [0003a11000 - 0003a14000] BOOTMEM
> [ 0.000000] #18 [0001517e80 - 0001517e98] BOOTMEM
> [ 0.000000] #19 [0001525080 - 0001525680] BOOTMEM
> [ 0.000000] #20 [0001517ec0 - 0001517eed] BOOTMEM
> [ 0.000000] #21 [0001517f00 - 0001517f2f] BOOTMEM
> [ 0.000000] #22 [0001525680 - 000152577c] BOOTMEM
> [ 0.000000] #23 [0001517f40 - 0001517f80] BOOTMEM
> [ 0.000000] #24 [0001517f80 - 0001517fc0] BOOTMEM
> [ 0.000000] #25 [0001517fc0 - 0001518000] BOOTMEM
> [ 0.000000] #26 [0001525780 - 00015257c0] BOOTMEM
> [ 0.000000] #27 [00015257c0 - 0001525800] BOOTMEM
> [ 0.000000] #28 [0001525800 - 0001525840] BOOTMEM
> [ 0.000000] #29 [0001525840 - 0001525850] BOOTMEM
> [ 0.000000] #30 [0001525880 - 00015258cf] BOOTMEM
> [ 0.000000] #31 [0001525900 - 000152594f] BOOTMEM
> [ 0.000000] #32 [0003c00000 - 0003c0e000] BOOTMEM
> [ 0.000000] #33 [0003d00000 - 0003d0e000] BOOTMEM
> [ 0.000000] #34 [0001525980 - 0001525984] BOOTMEM
> [ 0.000000] #35 [00015259c0 - 00015259c4] BOOTMEM
> [ 0.000000] #36 [0001525a00 - 0001525a08] BOOTMEM
> [ 0.000000] #37 [0001525a40 - 0001525a48] BOOTMEM
> [ 0.000000] #38 [0001525a80 - 0001525b20] BOOTMEM
> [ 0.000000] #39 [0001525b40 - 0001525b88] BOOTMEM
> [ 0.000000] #40 [0003a14000 - 0003a18000] BOOTMEM
> [ 0.000000] #41 [0003a18000 - 0003a98000] BOOTMEM
> [ 0.000000] #42 [0003a98000 - 0003ad8000] BOOTMEM
> [ 0.000000] Initializing HighMem for node 0 (00037bfe:0003ecfd)
> [ 0.000000] Memory: 984704k/1029108k available (2267k kernel code, 44012k
> reserved, 1119k data, 372k init, 115708k highmem)
> [ 0.000000] virtual kernel memory layout:
> [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
> [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
> [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
> [ 0.000000] .init : 0xc134f000 - 0xc13ac000 ( 372 kB)
> [ 0.000000] .data : 0xc1236d30 - 0xc134e948 (1119 kB)
> [ 0.000000] .text : 0xc1000000 - 0xc1236d30 (2267 kB)
> [ 0.000000] Checking if this processor honours the WP bit even in
> supervisor mode...Ok.
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU-based detection of stalled CPUs is disabled.
> [ 0.000000] Verbose stalled-CPUs detection is disabled.
> [ 0.000000] NR_IRQS:512
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] Detected 3415.784 MHz processor.
> [ 0.040000] Calibrating delay loop (skipped) preset value.. 6831.56
> BogoMIPS (lpj=34157840)
> [ 0.040000] pid_max: default: 32768 minimum: 301
> [ 0.040000] Security Framework initialized
> [ 0.040000] SELinux: Disabled at boot.
> [ 0.040000] Mount-cache hash table entries: 512
> [ 0.040000] Initializing cgroup subsys ns
> [ 0.040000] Initializing cgroup subsys cpuacct
> [ 0.040000] Initializing cgroup subsys devices
> [ 0.040000] mce: CPU supports 10 MCE banks
> [ 0.040000] using C1E aware idle routine
> [ 0.040000] Performance Events: AMD PMU driver.
> [ 0.040000] ... version: 0
> [ 0.040000] ... bit width: 48
> [ 0.040000] ... generic registers: 4
> [ 0.040000] ... value mask: 0000ffffffffffff
> [ 0.040000] ... max period: 00007fffffffffff
> [ 0.040000] ... fixed-purpose events: 0
> [ 0.040000] ... event mask: 000000000000000f
> [ 0.043049] ACPI: Core revision 20100428
> [ 0.045055] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.045992] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.046706] CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
> ----------
>
>
> With '-m 1025M' and more, 'earlyprintk=serial,ttyS0,115200' is required to get
> the following output from the kernel before it hangs:
> ----------
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.35.11-roadster (root@gb68) (gcc version 4.4.3
> (GCC) ) #1 SMP Tue Mar 29 01:21:10 BST 2011
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000400fd000 (usable)
> [ 0.000000] BIOS-e820: 00000000400fd000 - 0000000040100000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
> [ 0.000000] bootconsole [earlyser0] enabled
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI 2.4 present.
> ----------
>
> Is this a qemu-kvm problem? A Kernel problem? Stupid user problem? Fencepost
> error? Garbled Squebian install? Squebian-specific?
>
Looks like a guest BIOS issue.
Please try qemu-0.14. Also try -cpu qemu64 instead of phenom.
If those fail, we can attach with gdb and try to look at what's going
on, but let's try the simple tests first.
--
error compiling committee.c: too many arguments to function
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: kvm hangs with 1GB or more memory assigned
[not found] ` <201104150028.03397.neal.p.murphy@alum.wpi.edu>
@ 2011-04-20 8:01 ` Avi Kivity
0 siblings, 0 replies; 3+ messages in thread
From: Avi Kivity @ 2011-04-20 8:01 UTC (permalink / raw)
To: neal.p.murphy; +Cc: KVM list
(re-adding list)
On 04/15/2011 07:28 AM, Neal Murphy wrote:
> On Wednesday 06 April 2011 03:35:27 you wrote:
> > On 04/06/2011 06:22 AM, Neal Murphy wrote:
> > > ENVIRONS:
> > > I'm running
> > >
> > > - Debian Squeeze.
> > > - QEMU PC emulator version 0.12.5 (qemu-kvm-0.12.5)
> > > - 2.6.32-5-686-bigmem #1 SMP Tue Mar 8 22:14:55 UTC 2011 i686
> > > GNU/Linux - Quad Phenom II 965, 8GB RAM
> > >
> > > I'm booting generic 2.6.35.11 through syslinux. The command is generated
> > > via a script I wrote. It works fine until I assign more than 1005M RAM
> > > to the VM; it's been working fine (at less than 1GB RAM) for many
> > > months. The system I am booting boots and runs fine on bare metal.
> > >
> > > I got the same results when I DLed and installed ver. 0.14.
>
> > Looks like a guest BIOS issue.
> >
> > Please try qemu-0.14. Also try -cpu qemu64 instead of phenom.
> >
> > If those fail, we can attach with gdb and try to look at what's going
> > on, but let's try the simple tests first.
>
> BTW, is there a preferred 'set' of options to feed ./configure?
No.
> I used
> './configure --prefix=/opt/kvm --enable-kvm' to build.
>
> Finally got my system (Smoothwall/Roadster) stabilized and out the door, so I
> have time to dedicate to this.
>
> OK. I've built 0.14 (installed to /opt/kvm and I deleted Squeeze's older
> package) and am using Squeeze's kvm_amd module. I tried without -cpu and -smp;
> I tried -cpu qemu64. I eliminated the -vga and -serial options to no avail. It
> still chokes on 1005MB RAM.
>
Works for me. Please use -monitor stdio and issue the commands
(qemu) info registers
(qemu) x/50i $eip - 30
> So what's the next ste... ... Wait, just thought of something to try: 'rmmod
> kvm-amd'. ... Oho! Without the accelerator, it runs with at least 1588M RAM,
> but can't allocate 2000M RAM (this may be expected on a 32-bit OS with PAE).
2G limit is expected on i386.
> Does this help? Is it time to submit a debian bug?
If debian fixes the bug, that would be great.
--
error compiling committee.c: too many arguments to function
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-04-20 8:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-06 3:22 kvm hangs with 1GB or more memory assigned Neal Murphy
2011-04-06 7:35 ` Avi Kivity
[not found] ` <201104150028.03397.neal.p.murphy@alum.wpi.edu>
2011-04-20 8:01 ` Avi Kivity
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox